05008 DLZ-5 - DLZ-30CA Only One Name Means ProTek’Tion™ High powered multi-line tvs array Description The DLZ Series of silicon transient voltage suppressors (TVS) are available in a ceramic, hermetically sealed dual-in-line package. This series is designed to protect aerospace, standard TTL and MOS bus lines in applications where NEMP, ESD and other induced voltage surges can damage or upset voltage sensitive circuitry. The DLZ Series has a peak pulse power rating of 1,300 Watts for an 8/20µs waveshape. This devices meets the IEC 61000-4-2, IEC 61000-4-4 and IEC 61000-4-5 requirements. 16 Pin Cdip package Features applications • Compatible with IEC 61000-4-2 (ESD): Air - 15kV, Contact - 8kV • Compatible with IEC 61000-4-4 (EFT): 40A - 5/50ns • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(LineGnd) & Level 3(Line-Line) • MIL-STD-461 Compatible • Satisfies Military NEMP Requirements • 1,300 Watts Peak Pulse Power per Line (tp = 8/20µs) • Unidirectional & Bidirectional Configurations • ESD Protection > 25 kilovolts • Internal Common Ground • Available in Multiple Voltages • Protects up to 15 Lines • RoHS Compliant • REACH Compliant • • • • Military & Aerospace Data Line Protection RS-232 & RS-423 Data Lines Microprocessor Based Equipment Multiple Data & Power Bus Line Protection Mechanical characteristics • • • • Hermetically Sealed Ceramic 16 Pin Dual-In-Line (DIP) Package Approximate Weight: 3.2 grams Flammability Rating UL 94V-0 Screening Per MIL-PRF-19500 Available Upon Request: H1 - 100 % Screening (Test Plans 05227 & 05229) H2 - 100% Screening (05228 & 05230) • Screening to DESC Drawing 94029 (Bidirectional) and 94030 (Unidirectional) PIN CONFIGURATIONs 16 15 14 1 2 3 13 12 11 10 9 4 5 6 7 8 UNIDIRECTIONAL 16 15 14 13 12 11 10 9 1 2 3 4 5 6 7 8 BIDIRECTIONAL 05008.R9 2/11 Page 1 www.protekdevices.com 05008 DLZ-5 - DLZ-30CA Only One Name Means ProTek’Tion™ typical device characteristics MAXIMUM RATINGS @ 25°C Unless Otherwise Specified PARAMETER SYMBOL VALUE UNITS PPP 1,300 Watts Peak Pulse Power (tp = 8/20µs) - See Figure 1 Operating Temperature Storage Temperature Forward Surge Rating (1/120 seconds) Unidirectional TL -55 to 150 °C TSTG -55 to 150 °C IF 10 Amps ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER (Note 1-2) RATED STAND-OFF VOLTAGE minimum breakdown voltage MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM CLAMPING VOLTAGE (Fig. 2) MAXIMUM LEAKAGE CURRENT maximum CAPACITANCE temperature coefficient of v(br) VWM VOLTS @1mA V(BR) VOLTS @ IP = 1A VC volts @ IP = 10A VC volts @V WM ID µA @0V, 1MHz C pF qV(BR) mV/°C DLZ-5 5.0 6.0 10.2 12.5 200 880 5 DLZ-5A 5.0 6.0 9.5 10.6 200 880 5 DLZ-12 12.0 13.3 21.1 26.0 2 440 18 DLZ-12A 12.0 13.3 19.1 23.5 2 440 18 DLZ-17 17.0 19.2 30.4 37.4 2 330 20 DLZ-17A 17.0 19.2 27.5 33.9 2 330 20 DLZ-24 24.0 26.7 42.3 52.1 2 275 31 DLZ-24A 24.0 26.7 38.3 47.2 2 275 31 DLZ-30 30.0 33.3 52.8 65.0 2 220 39 DLZ-30A 30.0 33.3 47.8 58.8 2 220 39 DLZ8C 8.0 8.5 13.4 16.6 10 440 9 DLZ-13C 13.0 14.4 22.8 28.1 4 385 18 DLZ-13CA 13.0 14.4 20.6 25.4 4 385 18 DLZ-19C 19.0 21.6 34.2 42.1 4 275 24 DLZ-19CA 19.0 21.6 31.0 38.1 4 275 24 DLZ-30C 30.0 33.3 52.8 65.0 4 165 39 DLZ-30CA 30.0 33.3 47.8 58.8 4 165 39 notes 1. Part numbers with a “C” suffix are bidirectional devices, i.e., DLZ-8C. 2. tclamping (0V to VBR min): Less than 1x10-12 seconds (10x10-9 seconds bidirectional). 05008.R9 2/11 Page 2 www.protekdevices.com 05008 DLZ-5 - DLZ-30CA Only One Name Means ProTek’Tion™ typical device characteristics figure 1 peak pulse power vs pulse time PPP - Peak Pulse Power - kilowatts 100 10 1300W, 8/20µs Waveform 1 0.1 0.1 10 100 td - Pulse Duration - µs Peak Value IPP 80 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs e-t 60 40 10,000 figure 3 power derating curve Peak Pulse Power 8/20µs 80 % Of Rated Power tf 100 td = t/(IPP/2) 60 40 20 20 0 1,000 figure 2 pulse wave form 120 IPP - Peak Pulse Current - % of IPP 1 0 05008.R9 2/11 5 10 15 t - Time - µs 20 25 30 Page 3 0 Average Power 0 25 50 75 100 125 TA - Ambient Temperature - °C 150 www.protekdevices.com 05008 DLZ-5 - DLZ-30CA Only One Name Means ProTek’Tion™ 16 pin Cdip package information A outline dimensions dim millimeters C inches min max min max A 22.72 23.48 0.895 0.925 B 11.43 12.19 0.450 0.480 C - 4.87 - 0.192 D 7.36 7.84 0.290 0.310 E - 0.635 - 0.025 F 4.19 5.21 0.165 0.205 G 2.42 2.66 0.095 0.105 H 0.33 0.57 0.023 0.013 I 0.88 1.12 0.035 0.045 B Pin 1 Pin 1 Index E Notes 1. Dimensions are exclusive of mold flash and metal burrs. 2. Controlling dimensions in inches. 3. Package sealed with ceramic or metal lid. D I F G H ORDERING INFORMATION base PART NUMBER (xx = Voltage) Screened Screened & Group B DLZ-xxxx H1 H2 Notes 1. Marking on Part - logo, part number, date code and pin one defined by flag on lead. Package outline per document number 06029.R1 9/09 05008.R9 2/11 Page 4 www.protekdevices.com 05008 DLZ-5 - DLZ-30CA Only One Name Means ProTek’Tion™ company information COMPANY PROFILE ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), inductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. CONTACT US Corporate Headquarters 2929 South Fair Lane Tempe, Arizona 85282 USA By Telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By E-mail: Sales: [email protected] Customer Service: [email protected] Technical Support: [email protected] Web www.protekdevices.com www.protekanalog.com COPYRIGHT © ProTek Devices 1998 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. 05008.R9 2/11 Page 5 www.protekdevices.com