Crimp Ring and Banding Backshells MS3419 and AS85049/26 Crimp Ring Backshell M85049/26-1-12 W Glenair Connector Designator A MIL-DTL-5015 Series 3400, MIL-DTL-26482 Series 2, AS81703 Series 3, MIL-DTL-83723 Series I & III Shell Size MS3419-21 C TABLE I Shell Size 3 8 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 A Thread Class 2B .562 - 24 UNEF .500 - 20 UNF .625 - 24 UNEF .750 - 20 UNEF .875 - 20 UNEF 1.000 - 20 UNEF 1.062 - 18 UNEF 1.188 - 18 UNEF 1.313 - 18 UNEF 1.438 - 18 UNEF 1.750 - 18 UNS 2.000 - 18 UNS 2.250 - 16 UN 2.500 - 16 UN 2.750 - 16 UN 3.000 - 16 UN 1.500 - 18 UNEF Finish (Not Applicable for M85049/26-2) N = Electroless Nickel W = 1,000 Hour Cadmium Olive Drab Over Electroless Nickel Basic Part No. M85049/26-1 = Adapter Only M85049/26-2 = Crimp Ring Only M85049/26-3 = Adapter with Crimp Ring C Dia Max .67 (17.0) .62 (15.7) .73 (18.5) .86 (21.8) .98 (24.9) 1.11 (28.2) 1.22 (31.0) 1.35 (34.3) 1.47 (37.3) 1.59 (40.4) 1.97 (50.0) 2.22 (56.4) 2.47 (62.7) 2.72 (69.1) 2.97 (75.4) 3.22 (81.8) 1.65 (41.9) Basic Part No. Adapter Only Dash No. Superceded Part Number Finish A = Electroless Nickel C = 500 Hour Cadmium Olive Drab Over Electroless Nickel .957 (24.3) Max A Thread M85049/26-2 Crimp Ring G C H E F J M85049/26-2 Crimp Ring TABLE II M85049/26-3 (Adapter with Crimp Ring) Shell Size 3 8 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 M85049/26-1 (Adapter Only) MS3419 (Adapter Only) E F Shell Dia Dia Size .250 (6.4) .337 (8.6) 3 .250 (6.4) .337 (8.6) 8 .325 (8.3) .488 (12.4) 10 .420 (10.7) .500 (12.7) 12 .540 (13.7) .620 (15.7) 14 .670 (17.0) .750 (19.1) 16 .789 (20.0) .880 (22.4) 18 .914 (23.2) 1.000 (25.4) 20 1.039 (26.4) 1.120 (28.4) 22 1.112 (28.2) 1.192 (30.3) 24 1.389 (35.3) 1.545 (39.2) 28 1.635 (41.5) 1.795 (45.6) 32 1.850 (47.0) 2.045 (51.9) 36 2.065 (52.5) 2.295 (58.3) 40 2.320 (58.9) 2.545 (64.6) 44 2.570 (65.3) 2.795 (71.0) 48 1.210 (30.7) 1.359 (34.5) 61 Shell Size 8 10 12 14 16 18 20 22 24 28 32 36 40 44 48 61 M85049/26-2 (Crimp Ring Only) H G Min Min .400 .585 .585 .705 .835 1.005 1.125 1.245 1.327 1.665 1.915 2.165 2.415 2.665 2.915 1.435 (10.2) (14.9) (14.9) (17.9) (21.2) (25.5) (28.6) (31.6) (33.7) (42.3) (48.6) (55.0) (61.3) (67.7) (74.0) (36.4) .448 .660 .660 .780 .910 1.080 1.200 1.320 1.402 1.740 1.990 2.240 2.490 2.740 2.990 1.510 (11.4) (16.8) (16.8) (19.8) (23.1) (27.4) (30.5) (33.5) (35.6) (44.2) (50.5) (56.9) (63.2) (69.6) (75.9) (38.4) J .250 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 .440 (6.4) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) (11.2) 1. For complete dimensions see applicable Military Specification. 2. Metric dimensions (mm) are indicated in parentheses. © 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com E-Mail: [email protected] 44-3