Fox HC49SD Resistance weld smd crystal Datasheet

RESISTANCE WELD SMD CRYSTAL
MODEL: HC49SD SERIES
FEATURES
•
•
•
•
OPTIONS
Low Cost
• Tolerances to < 10 PPM
Stock Standard
• Stabilities to < 5 PPM
Fundamental to 50 MHz (BT Cut) • Temperatures to -40ºC ~ -85ºC
Tape and Reel (1,000 pcs. STD) • 4 Pad HC49SPX (Alternate to FPX)
• 3.2mm Height Max (HC49SSD)
DISCONTINUED
• PART NUMBER SELECTIONLearn More - Internet Required
PARAMETERS
Frequency Range
Frequency Tolerance @ 25ºC
Frequency Stability, ref @ 25ºC
Over Operating Temp Range
Temperature Range
Operating
(TOPR)
Storage
(TSTG)
Shunt Capacitance
(Co)
Load Capacitance
(CL)
MAX (unless otherwise noted)
3.200 ~ 70.000 MHz
±50 PPM 1,2
Drive Level
Aging per year
Learn more about:
Part Marking Identification
Tape and Reel Specification
Internet required
±50 PPM 1
-10ºC ~ +70ºC 1
-40ºC ~ +85ºC
7 pF
10 pF ~ Series
(Customer Specified)
0.5 mW
±5 PPM
1
Other tolerances, stabilities & operating temperature ranges available. Consult Fox Customer
Service for specific requirements.
Crystal has a ±30ppm tolerance specification for all standard part numbers. These part numbers are
listed in
the Fox catalog on the Standard Crystal table.
All specifications subject to change without notice. Rev. 3/9/05
2
Frequency Range
(MHz)
3.200 ~ 3.500
3.500+ ~ 4.000
4.000+ ~ 5.000
5.000+ ~ 6.000
6.000+ ~ 7.000
7.000+ ~ 9.000
9.000+ ~ 13.000
13.000+ ~ 20.000
20.000+ ~ 50.000
27.000 ~ 70.000
Operating Mode
Max ESR Ω
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
Fundamental
3rd OT
300
200
150
120
100
80
60
40
30
100
All dimensions are in millimeters.
FOXElectronics
5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1(239) 693.0099 FAX +1 (239) 693.1554 http://www.foxonline.com
EMEA Munich, Germany +49 0 89.90936870 FAX +49 0 89.90936776 | Asia Hong Kong +852.2854.4285 FAX +852.2854.4282
© 2005 FOX ELECTRONICS
9
Similar pages