SMD Shielded type ■SHAPES & DIMENSIONS ■ELECTRICAL CHARACTERISTICS RECOMMENDED PCB PATTERN (Dimensions in mm) Inductance (µH) Ordering Code 1.4MAX 2.0±0.2 2.0±0.2 2.3 0.92 POWER INDUCTORS LPF2015-C SERIES 0.92 Inductance TOL.(%) DC Resistance Rated Current (Ω )Max. [A] Max. ( )is typical value. LPF2015T-1R5M-C 1.5 0.15(0.12) 0.90 LPF2015T-2R2M-C 2.2 0.20(0.17) 0.75 LPF2015T-3R3M-C 3.3 0.28(0.24) 0.60 LPF2015T-4R7M-C 4.7 0.33(0.30) 0.50 ± 20 LPF2015T-6R8M-C 6.8 0.50(0.46) 0.40 LPF2015T-100M-C 10.0 0.85(0.81) 0.30 LPF2015T-150M-C 15.0 1.05(1.00) 0.25 2.3 1.4 1.4 ■TEST EQUIPMENTS ■OPERATING TEMPERATURE RANGE • Inductance: Agilent 4284A LCR Meter (100KHz 0.5V) • Rdc: HIOKI 3540 mΩ HiTESTER • Bias Current: Agilent 4284A + Agilent 42841A • Rate Current: △L ≤ 30% reduction from nominal L value or △T ≤ 40˚C typical at rated current whichever is lower LPF3010 SERIES -30 ~ +85˚C (Including self-temp. rise) SMD Shielded type ■SHAPES & DIMENSIONS RECOMMENDED PCB PATTERN 100 (Dimensions in mm) 1.0±0.1 1.2 2 2R 22µH 15µH 10µH 3.1 1.2 Inductance(uH) 2.8±0.2 2.8±0.2 3.1 1.7 10 6.8µH 4.7µH 3.3µH 2.2µH 1 1.5µH 3.7±0.2 1.7 0.6 0.1 1 ■TEST EQUIPMENTS • Inductance: Agilent 4284A LCR Meter (100KHz 0.5V) • Rdc: HIOKI 3540 mΩ HiTESTER • Bias Current: Agilent 4284A + Agilent 42841A • IDC1(The saturation current): △L ≤ -35% reduction from nominal L value • IDC2(The temperature rise): △T = 40˚C typical at rated current ■OPERATING TEMPERATURE RANGE -30 ~ +85˚C (Including self-temp. rise) 10 100 Current(mA) 1000 10000 ■ELECTRICAL CHARACTERISTICS Ordering Code Test DC Resistance Inductance Inductance Freq. (Ω)Max. (µH) TOL.(%) (KHz) ( )is typical value. ± 30 Rated Current[A] IDC1 (Max.) IDC2 (Typ.) Marking LPF3010T-1R5N 1.5 0.097(0.082) 1.20 1.90 1R5 LPF3010T-2R2N 2.2 0.110(0.098) 1.00 1.20 2R2 LPF3010T-3R3N 3.3 0.200(0.180) 0.87 1.10 3R3 LPF3010T-4R7N 4.7 0.280(0.260) 0.70 1.00 4R7 LPF3010T-6R8N 6.8 0.340(0.320) 0.61 0.83 6R8 LPF3010T-100N 10.0 0.580(0.530) 0.45 0.56 100 LPF3010T-150N 15.0 0.860(0.790) 0.40 0.46 150 LPF3010T-220N 22.0 1.130(1.030) 0.33 0.41 220 ± 20 100 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before your order and/or use. 17