1008 CHIP INDUCTORS High-Reliability Chip Inductors ML413RAD This robust version of Coilcraft’s standard 1008HQ series features high temperature materials that allow operation in ambient temperatures up to 155°C. Part number1 ML413RAD3N0_LZ2 ML413RAD4N1_LZ ML413RAD7N8_LZ2 ML413RAD10N_LZ ML413RAD12N_LZ ML413RAD18N_LZ ML413RAD22N_LZ ML413RAD33N_LZ ML413RAD36N_LZ ML413RAD39N_LZ ML413RAD47N_LZ ML413RAD56N_LZ ML413RAD68N_LZ ML413RAD82N_LZ ML413RADR10_LZ Inductance3 (nH) 3.0 @ 50 MHz 4.1 @ 50 MHz 7.8 @ 50 MHz 10 @ 50 MHz 12 @ 50 MHz 18 @ 50 MHz 22 @ 50 MHz 33 @ 50 MHz 36 @ 50 MHz 39 @ 50 MHz 47 @ 50 MHz 56 @ 50 MHz 68 @ 50 MHz 82 @ 50 MHz 100 @ 50 MHz PercentSRF min5 tolerance Q min4 (GHz) 5 57 @ 1000 MHz >5.00 5 75 @ 1000 MHz >5.00 5 51 @ 500 MHz 3.80 5,2 60 @ 500 MHz 3.20 5,2 57 @ 500 MHz 2.40 5,2 62 @ 350 MHz 2.10 5,2 62 @ 350 MHz 2.05 5,2 49 @ 150 MHz 1.70 5,2 57 @ 150 MHz 1.40 5,2 45 @ 150 MHz 1.30 5,2,1 45 @ 150 MHz 1.45 5,2,1 43 @ 150 MHz 1.08 5,2,1 54 @ 150 MHz 1.15 5,2,1 54 @ 150 MHz 1.06 5,2,1 51 @ 150 MHz 0.82 1. When ordering, please specify tolerance and testing codes: ML313RADR10JLZ Tolerance: F = 1% G = 2% J = 5% Testing: Z = COTS H = Screening per Coilcraft CP‑SA‑10001 N = Screening per Coilcraft CP‑SA‑10003 2. Part is wound on low profile coilform. 3. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286A impedance analyzer or equivalent with Coilcraft-provided correlation pieces. 4. Q measured using an Agilent/HP 4291A with an AgilentHP 16197A test fixture or equivalents. 5. SRF measured using an Aglilent/HP 8753ES network analyzeror equivalent and a Coilcraft SMD-D test fixture. 6. DCR measured on a Keithley 580 micro-ohmmeter or equivalent and a Coilcraft CCF858 test fixture. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Imax (A) 1.8 1.8 1.6 1.5 1.5 1.4 1.4 1.2 1.1 1.1 0.95 0.95 0.85 0.80 0.80 Core material Ceramic Terminations Silver-palladium-platinum-glass frit. Ambient temperature –55°C to +125°C with Imax current, +125°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 2000/7″reel Standard height parts: Plastic tape: 8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.8 mm pocket depth Low profile parts: Plastic tape: 8 mm wide, 0.3 mm thick, 4 mm pocket spacing, 1.6 mm pocket depth Document ML190-1 Revised 11/06/12 ® © Coilcraft, Inc. 2012 DCR max6 (mOhms) 38 50 50 60 60 70 70 90 90 90 120 120 130 160 160 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 1008 CHIP INDUCTORS ML413RAD Series (1008) Typical Q vs Frequency 120 Typical L vs Frequency 120 22 nH 110 10 nH 68 nH 100 100 47 nH 3.0 nH 90 90 70 Inductance (nH) Q Factor 80 100 nH 60 50 40 30 70 50 40 22 nH 30 10 10 0 0 1000 47 nH 60 20 100 68 nH 80 20 10 100 nH 110 10000 10 nH 3.0 nH 1 10 100 Frequency (MHz) 10000 Frequency (MHz) Current Derating B overall 120 H C Pick and place material F 110 G A 100 90 E terminal 70 60 I J F 80 I D Recommended Suggested LandPattern Pattern Land Terminal wraparound: approx 0.015/0,38 both ends 50 40 A max 25°C Percent of rated Irms 1000 30 C max* D ref E F G H I J 0.115 0.110 0.080 0.020 0.080 0.020 0.060 0.100 0.040 0.050 inches 20 2,92 10 0 -55 -40 B max 2,79 2,03 0,51 2,03 0,51 1,52 2,54 1,02 1,27 mm *Low profile parts: 0.050/1,27 -20 0 20 40 60 80 100 120 140 160 Ambient temperature (°C) Document ML190-2 Revised 11/06/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.