SAW Components SAW duplexer WCDMA band VIII Series/type: Ordering code: B8516 B39941B8516P810 Date: Version: April 25, 2013 1.0 EPCOS AG 2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. EPCOS AG is a TDK Group Company. SAW Components B8516 897.5 / 942.5 MHz SAW duplexer Data sheet Application ■ Low-loss SAW duplexer for mobile telephone WCDMA Band VIII systems Low insertion attenuation Low amplitude ripple Usable passband 35 MHz Single ended to balanced transformation in Antenna - Rx path ■ Impedance transformation 50Ω to 100Ω in Antenna - Rx path ■ high Tx - Rx isolation ■ ■ ■ ■ 0.43 mm2 Package size 2.0 x 1.6 Maximum package height 0.47 mm max. Approximate weight 0.0051 g RoHS compatible Package for Surface Mount Technology (SMT) ■ Ni, gold-plated terminals ■ Electrostatic Sensitive Device (ESD) ■ Moisture Sensitive Level 3 0.33 1 2 3 4 7 5 0.7 side view 2.0 6 5 4 8 7 1.6 6 bottom view 0.29 8 0.29 9 0.47 max. ■ ■ ■ ■ ■ 0.35 Features 1 2 top view 3 Pin configuration ■ ■ ■ ■ 3,4 1 6 2,5,7,8,9 RX output, balanced TX input, single ended Antenna To be Grounded 3 1 4 5,8,9 2,7 6 Please read cautions and warnings and important notes at the end of this document. 2 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer PreliminaryData Characteristics Temperature range for specification: ANT terminating impedance: TX terminating impedance: RX terminating impedance: T = –20 ˚C to +85 ˚C ZANT= 50 Ω || 5.6nH ZTX = 50 Ω 1) ZRX = 100 Ω (balanced)1) Characteristics Tx - Ant1) min. max. — typ. @ 25 ˚C 897.5 — MHz MHz αWCDMA2) MHz — — 2.1 2.8 2.6 3.9 dB dB MHz ∆αWCDMA2) MHz — — 1.2 1.2 1.8 2.9 dB dB — — 2.3 2.3 6.0 4.04) % % — 1.6 2.0 — 1.5 2.0 30 32 30 10 42 37 36 35 37 50 — — — — — dB dB dB dB dB 484) 20 40 40 40 40 25 35 50 47 47 46 46 45 45 43 — — — — — — — — dB dB dB dB dB dB dB dB Center frequency fC Maximum insertion attenuation @fCarrier 882.4 ... 912.6 880.0 ... 915.0 Amplitude ripple (p-p) @fCarrier 882.4 ... 912.6 880.0 ... 915.0 Error Vector Magnitude @fCarrier 882.4 ... 912.6 ... 912.6 MHz EVM3) MHz EVM3) 880.0 ... 915.0 MHz 880.0 ... 915.0 MHz @fCarrier 882.4 VSWR TX port ANT port α Attenuation 0.3 716.0 728.0 865.0 @fCarrier 927.4 ... ... ... ... ... @fCarrier 927.4 ... 1452.0 ... 1565.42 ... 1573.374... 1577.466... 1597.55 ... 1670.0 ... 1760.0 ... 1) 2) 3) 4) 716.0 728.0 865.0 870.0 957.6 MHz MHz MHz MHz MHz αWCDMA2) 957.6 MHz αWCDMA2) 1477.0 MHz 1573.374MHz 1577.466MHz 1585.42 MHz 1605.89 MHz 1675.0 MHz 1830.0 MHz Appropriate matching network has to be applied towards PA and LNA. See page (8) for recommendation. Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (7). Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. T=5˚C to +85˚C Please read cautions and warnings and important notes at the end of this document. 3 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer Data sheet Characteristics Temperature range for specification: ANT terminating impedance: TX terminating impedance: RX terminating impedance: T = –20 ˚C to +85 ˚C ZANT= 50 Ω || 5.6nH ZTX = 50 Ω 1) ZRX = 100 Ω (balanced)1) Characteristics Tx - Ant1) typ. @ 25 ˚C max. 27 27 28 22 25 20 20 15 10 38 36 32 28 32 26 26 22 16 — — — — — — — — — α Attenuation 1830.0 2110.0 2400.0 2620.0 2640.0 3520.0 4400.0 5100.0 5490.0 1) min. ... ... ... ... ... ... ... ... ... 1880.0 2170.0 2500.0 2640.0 2745.0 3660.0 4575.0 5490.0 5850.0 MHz MHz MHz MHz MHz MHz MHz MHz MHz dB dB dB dB dB dB dB dB dB Appropriate matching network has to be applied towards PA and LNA. See page (8) for recommendation. Please read cautions and warnings and important notes at the end of this document. 4 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer PreliminaryData Characteristics Temperature range for specification: ANT terminating impedance: TX terminating impedance: RX terminating impedance: T = –20 ˚C to +85 ˚C ZANT= 50 Ω || 5.6nH ZTX = 50 Ω 1) ZRX = 100 Ω (balanced)1) Charcteristics Rx - Ant1) min. max. — typ. @ 25 ˚C 942.5 — MHz MHz αWCDMA2) MHz — — 2.0 2.5 2.5 3.7 dB dB MHz ∆αWCDMA2) MHz — — 0.6 1.0 1.2 2.3 dB dB — 2.7 8.0 % — 2.7 4.04) % Center frequency fC Maximum insertion attenuation @fCarrier 927.4 ... 957.6 925.0 ... Amplitude ripple (p-p) @fCarrier 927.4 ... 960.0 925.0 ... Error Vector Magnitude @fCarrier 927.4 ... 960.0 @fCarrier 927.4 957.6 957.6 ... 957.6 MHz EVM3) MHz EVM3) VSWR RX port 925.0 ... 960.0 MHz — 1.6 2.1 ANT port 925.0 ... 960.0 MHz — 1.6 2.0 0.3 462.0 480.0 835.0 870.0 @fCarrier 882.4 ... ... ... ... ... ... 462.0 480.0 835.0 870.0 880.0 912.6 α MHz MHz MHz MHz MHz MHz αWCDMA2) MHz MHz MHz MHz MHz α MHz 35 45 38 50 38 50 16 35 45 35 35 62 62 62 62 62 58 36 58 58 55 54 — — — — — — — — — — — dB dB dB dB dB dB dB dB dB dB dB 23 28 — dB Attenuation 980.0 ... 1045.0 1045.0 ... 2400.0 2400.0 ... 2500.0 2500.0 ... 4810.0 5100.0 ... 5825.0 Common Mode Rejection Ratio 925.0 ... 960.0 1) 2) 3) 4) Appropriate matching network has to be applied towards PA and LNA. See page (8) for recommendation. Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (7). Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141. T=5˚C to +85˚C Please read cautions and warnings and important notes at the end of this document. 5 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer Data sheet Characteristics Temperature range for specification: ANT terminating impedance: TX terminating impedance: RX terminating impedance: T = –20 ˚C to +85 ˚C ZANT= 50 Ω || 5.6nH ZTX = 50 Ω 1) ZRX = 100 Ω (balanced)1) Charcteristics Rx - Ant1) min. typ. @ 25 ˚C max. IMD product level limits2) at @fTX= 897.5MHz, fRX= 942.5MHz Blocker 1 45.0 MHz — -127 -115 dBm Blocker 2 852.5 MHz Blocker 3 1840.0 MHz — — -111 -110 -100 -100 dBm dBm Blocker 4 2737.5 MHz — -110 -100 dBm min. typ. @ 25 ˚C max. 56 63 — dB 50 58 — dB 55 63 — dB Charcteristics Tx - Rx Differential Mode Isolation @fCarrier 882.4 ... 912.6 ... 957.6 MHz αWCDMA3) MHz αWCDMA3) Common Mode Isolation @fCarrier 882.4 ... 912.6 MHz αWCDMA3) @fCarrier 927.4 1) 2) 3) Appropriate matching network has to be applied towards PA and LNA. See page (8) for recommendation. Power levels: 21dBm TXsignal,-15dBm blocker at antenna port Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation on page (7). Please read cautions and warnings and important notes at the end of this document. 6 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer PreliminaryData Maximum ratings Storage temperature range DC voltage ESD voltage ESD voltage ESD voltage Input power at Tstg VDC VESD VESD VESD PIN –40/+90 5 1001) 3002) 6003) 29 880.0 ... 915.0 MHz elsewhere ˚C V V V V machine model, 10 pulses HBM,+/- 1 pulses CDM, +/- 3 pulses } dBm dBm 10 WCDMA signal 55 ˚C, 10000 h 1) acc. to JESD22-A115B (machine model), 10 negative & 10 positive pulses. 2) acc. to JESD22-A114F (human body model), 1 negative & 1 positive pulses. 3) acc. to JESD22-C101C (charge device model), 3 negative & 3 positive pulses. Annotation for characteristics section Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by ∞ ∫–∞ Sds 21 ( f )HRRC ( f – f Carrier ) 2 df fCarrier according to 3GPP TS 25.101 (e.g. for UMTS-Passband, fCarrier ranges from 2112.4 MHz (lowest Rx channel) to 2167.6 MHz (highest Rx channel)). HRRC(f) is the transfer function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following normalization: ∞ ∫–∞ HRRC ( f ) Please read cautions and warnings and important notes at the end of this document. 7 2 df = 1 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer Data sheet Matching circuit to terminating impedances (element values depend upon pcb layout) 3 Rx, 100Ω Lp2 4 6 Ant, 50Ω Lp1 1 Tx, 50Ω Ls1 Lp1 = 5.6nH Lp2 = 82.0nH Ls1 = 1.0nH Please read cautions and warnings and important notes at the end of this document. 8 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer PreliminaryData Frequency Response TX-ANT (Power transfer function) Frequency Response TX-ANT (wideband) Please read cautions and warnings and important notes at the end of this document. 9 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer Data sheet Frequency Response ANT- RX (Power transfer function) Frequency Response ANT- RX (CW test signal) Please read cautions and warnings and important notes at the end of this document. 10 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer PreliminaryData Frequency Response ANT - RX (wideband) Frequency Response TX - RX (Power transfer function, differential mode) Please read cautions and warnings and important notes at the end of this document. 11 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer Data sheet Frequency Responce TX-RX (differential, CW signal) Frequency Response TX - RX (common mode, CW signal) Please read cautions and warnings and important notes at the end of this document. 12 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer PreliminaryData Matching (TX, RX, ANT) Please read cautions and warnings and important notes at the end of this document. 13 April 25, 2013 SAW Components B8516 897.5 / 942.5 MHz SAW duplexer Data sheet References Type B8516 Ordering code B39941B8516P810 Marking and package C61157-A8-A39 Packaging F61074-V8247-Z000 Date codes L_1126 S-parameters B8516_NB_UN.s4p, B8516_WB_UN.s4p see file header for port/pin assignment table Soldering profile S_6001 RoHS compatible defined as compatible with the following documents: "DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/EC from April 18th, 2005, amending Directive 2002/95/EC of the European Parliament and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in electrical and electronic equipment." Moldability Before using in overmolding environment, please contact your EPCOS sales office. Matching coils See Inductor pdf-catalog http://www.tdk.co.jp/tefe02/coil.htm#aname1 and Data Library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm For further information please contact your local EPCOS sales office or visit our webpage at www.epcos.com . Published by EPCOS AG Systems, Acoustics, Waves Business Group P.O. Box 80 17 09, 81617 Munich, GERMANY EPCOS AG 2013. This brochure replaces the previous edition. For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or the international Representatives. Due to technical requirements components may contain dangerous substances. For information on the type in question please also contact one of our Sales Offices. Please read cautions and warnings and important notes at the end of this document. 14 April 25, 2013 Important notes The following applies to all products named in this publication: 1. 2. 3. 4. 5. 6. 7. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. We nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. For these reasons, it is always ultimately incumbent on the customer to check and decide whether an EPCOS product with the properties described in the product specification is suitable for use in a particular customer application. We also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as specified. In customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. The warnings, cautions and product-specific notes must be observed. In order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous). Useful information on this will be found in our Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more detailed questions, please contact our sales offices. We constantly strive to improve our products. Consequently, the products described in this publication may change from time to time. The same is true of the corresponding product specifications. Please check therefore to what extent product descriptions and specifications contained in this publication are still applicable before or when you place an order. We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be available. The aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-specific products. Unless otherwise agreed in individual contracts, all orders are subject to the current version of the “General Terms of Delivery for Products and Services in the Electrical Industry” published by the German Electrical and Electronics Industry Association (ZVEI). The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CeraLink, CSMP, CSSP, CTVS, DeltaCap, DigiSiMic, DSSP, FilterCap, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in other countries. Further information will be found on the Internet at www.epcos.com/trademarks. 15 April 25, 2013