CMZ12~CMZ53 TOSHIBA Zener Diode Silicon Diffused Type CMZ12~CMZ53 Applications: Communication, Control and Measurement Equipment Constant Voltage Regulation Transient Suppressors • Unit: mm Average power dissipation : P = 2.0 W • Zener voltage : VZ = 12 V ~ 53 V • Suitable for compact assembly due to small surface-mount package “M−FLATTM” (Toshiba package name) Absolute Maximum Ratings (Ta = 25°C) Characteristics Symbol Rating Unit Power dissipation P 2.0 (Note 1) W Junction temperature Tj −40~150 °C Tstg −40~150 °C Storage temperature range Note 1: Ta = 30°C Device mounted on a ceramic board Board size: 50 mm × 50 mm Soldering size: 2 mm × 2 mm Board thickness: 0.64 t JEDEC ― JEITA ― TOSHIBA 3-4E1A Weight: 0.023 g (typ.) Note 2: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook (“Handling Precautions”/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Standard Soldering Pad 2.1 Unit: mm 1.4 3.0 1.4 1 2006-11-09 CMZ12~CMZ53 Electrical Characteristics (Ta = 25°C) Zener Voltage Vz (V) Type Zener Impedance rd (Ω) Measurement Current IZ (mA) Min Typ. Max CMZ12 10.8 12 13.2 10 30 CMZ13 11.7 13 14.3 10 CMZ15 13.5 15 16.5 CMZ16 14.4 16 17.6 CMZ18 16.2 18 CMZ20 18.0 CMZ22 Max Measurement Current IZ (mA) Temperature Coefficient Of Zener αT (mV/°C) Forward Voltage VF (V) Measurement Current IF (A) Reverse Current IR (μA) Max Measurement Voltage VR (V) Typ. Max Max 10 8 13 1.2 0.2 10 8 30 10 9 14 1.2 0.2 10 9 10 30 10 11 17 1.2 0.2 10 10 10 30 10 12 19 1.2 0.2 10 11 19.8 10 30 10 14 23 1.2 0.2 10 13 20 22.0 10 30 10 16 26 1.2 0.2 10 14 19.8 22 24.2 10 30 10 18 28 1.2 0.2 10 16 CMZ24 21.6 24 26.4 10 30 10 20 32 1.2 0.2 10 17 CMZ27 24.3 27 29.7 10 30 10 23 36 1.2 0.2 10 19 CMZ30 27.0 30 33.0 10 30 10 25 40 1.2 0.2 10 21 CMZ33 29.7 33 36.3 10 30 10 26 41 1.2 0.2 10 26.4 CMZ36 32.4 36 39.6 9 30 9 28 45 1.2 0.2 10 28.8 CMZ39 35.1 39 42.9 8 35 8 30 48 1.2 0.2 10 31.2 CMZ43 38.7 43 47.3 7 40 7 33 53 1.2 0.2 10 34.4 CMZ47 42.3 47 51.7 6 65 6 38 60 1.2 0.2 10 37.6 CMZ51 45.9 51 56.1 6 65 6 43 68 1.2 0.2 10 40.8 CMZ53 47.7 53 58.3 5 85 5 49 77 1.2 0.2 10 42.4 Marking Abbreviation Code Part No. 12 CMZ12 13 CMZ13 15 CMZ15 16 CMZ16 18 CMZ18 20 CMZ20 22 CMZ22 24 CMZ24 27 CMZ27 30 CMZ30 33 CMZ33 36 CMZ36 39 CMZ39 43 CMZ43 47 CMZ47 51 CMZ51 53 CMZ53 2 2006-11-09 CMZ12~CMZ53 Handling Precaution 1) The absolute maximum ratings denote the absolute maximum ratings, which are rated values and must not be exceeded during operation, even for an instant. The following are the general derating methods that we recommend when you design a circuit with a device. P : We recommend that the worst case power dissipation be no greater than 50% of the absolute maximum rating of power dissipation. Carry out adequate heat design. PRSM : We recommend that a device be used within the recommended area in thefigure, PRSM-tw. Tj : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a Tj of below 120°C. 2) Thermal resistance between junction and ambient fluctuates depending on the device’s mounting condition. When using a device, design a circuit board and a soldering land size to match the appropriate thermal resistance value. 3) Please refer to the Rectifiers databook for further information. 3 2006-11-09 CMZ12~CMZ53 Ta max – P 160 Non-repetitive peak reverse Power dissipation PRSM (W) 140 Maximum allowable temperature Ta max (°C) PRSM – tW (reference value) 1000 Device mounted on a ceramic board: board size: 50 mm × 50 mm Soldering land: 2.0 mm × 2.0 mm board thickness: 0.64 t 120 100 80 60 40 PRSM tW Ta = 25°C Rectangular pulse Recommended 100 20 10 0 0 0.4 0.8 1.2 1.6 Power dissipation P 2 0.1 2.4 (W) αT – V Z 10 tW (ms) αT – V Z (typ.) 50 25 (typ.) CMZ30~CMZ53 Temperature coefficient of Zener voltage αT (mV/°C) CMZ12~CMZ27 Temperature coefficient of Zener voltage αT (mV/°C) 1 Pulse width 20 15 10 5 45 40 35 30 25 0 10 14 18 22 Zener voltage 26 26 VZ (V) 30 34 38 42 Zener voltage 46 50 VZ 54 58 (V) rth (j-a) – t Transient thermal impedance rth (j-a) (°C/W) 1000 Device mounted on a glass-epoxy board: Soldering land: 2.1 mm × 1.4 mm 100 10 Device mounted on a glass-epoxy board: Soldering land: 6.0 mm × 6.0 mm 1 Device mounted on a ceramic board: Soldering land: 2.0 mm × 2.0 mm 0.1 0.001 0.01 0.1 1 10 100 1000 Time t (s) 4 2006-11-09 CMZ12~CMZ53 RESTRICTIONS ON PRODUCT USE 20070701-EN • The information contained herein is subject to change without notice. • TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the “Handling Guide for Semiconductor Devices,” or “TOSHIBA Semiconductor Reliability Handbook” etc. • The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury (“Unintended Usage”). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer’s own risk. • The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. • The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. • Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 2006-11-09