® CLA101 Four Channel Phototransistor Array Clairex Technologies, Inc. September, 2001 0.280 (7.11) 0.270 (6.86) B 0.005 (0.13) nom. D 0.050 (1.27) max COMMON 0.180 (4.57) 0.170 (4.32) D A = = 0.100 (2.54) typ. 0.250 (6.35) min. A C COMMON A B C D ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) ALL DIMENSIONS ARE IN INCHES (MILLIMETERS) Case 19 features • Full range of sensor chips • Full range of emitter chips • Miniature surface mountable package description The CLA101 four channel phototransistor array can be custom designed with photodiode or photoIC chips. An emitter version is also available using same wavelength or different wavelength die. For additional information, call Clairex. absolute maximum ratings (TA = 25°C unless otherwise stated) storage temperature.......................................................................... -40°C to +100°C operating temperature ..................................................................... -40°C to +100°C lead soldering temperature(1) ............................................................................ 260°C (2) maximum continuous current .......................................................................... 50mA peak forward current (1.0ms pulse width, 10% duty cycle) .................................... 1A reverse voltage ....................................................................................................... 5V continuous power dissipation(3) ......................................................................... 75mW notes: 1. 2. 3. At the base of the header for 5 seconds maximum. Derate linearly 0.53mA/°C from 25°C free air temperature to TA = +100°C. Derate linearly 0.80mW/°C from 25°C free air temperature to TA = +100°C. electrical characteristics (TA = 25°C unless otherwise noted) symbol IL ID parameter min typ max units test conditions Light current(4) 150 - - µA Matching factor - - 0.4 - Dark current - - 100 nA VCE = 10V, H=0 Ee=1mW/cm2, VCE=5V (ILHIGH-ILLOW)/ILHIGH V(BR)CEO Collector-emitter breakdown voltage 40 - - V ICE = 0.1mA V(BR)ECO Emitter-collector breakdown voltage 5.0 - - V IEC = 0.1mA VCE(SAT) Collector-emitter saturation voltage - - 0.4 V Ee=20mW/cm2, ICE=.5mA Rise and fall times - 3.0 - µs RL=100Ω, VCE= 5V tr, tf Note: 4. Radiation source for light current testing is tungsten at 2854°K. Clairex reserves the right to make changes at any time to improve design and to provide the best possible product. Clairex Technologies, Inc. Phone: 972-265-4900 1301 East Plano Parkway Fax: 972-265-4949 Revised 3/15/06 Plano, Texas 75074-8524 www.clairex.com