MMHZ5221BPT CHENMKO ENTERPRISE CO.,LTD THRU SURFACE MOUNT ZENER SILICON PLANAR POWER ZENER DIODES VOLTAGE RANGE 2.4V TO 91V MMHZ5270BPT FEATURE Small surface mounting type. (SOD-123) High temperature soldering type. ESD rating of class 3(>16 kV) per human body model. Silicon planar zener diodes. Silcon-oxide passivated junction. Low temperature coefficient voltage 500 mW Rating on FR-4 or FR-5 Board SOD-123 MECHANICAL 0.153(3.90) 0.140(3.55) 0.112(2.85) 0.098(2.50) 0.028(0.70) 0.018(0.45) * SOD-123 Packaging. * Cathode indicated by polarity band. * Mounting position: Any. 1 MAX. 0.008(0.2) 2 0.071(1.80) 0.055(1.40) 0.053(1.35) 0.035(0.90) * * * * * * * 0.004(0.12) 0.02(0.5) Tpy CIRCUIT (2) SOD-123 Dimensions in inches and (millimeters) (1) MAXIMUM RATINGES ( At TA = 25oC unless otherwise noted ) RATINGS SYMBOL VALUE UNITS - - - PD 225 mW TJ -65 to +150 o C -65 to +150 o C Zener Current ( see Table "Characteristics" ) Max. Steady State Power Dissipation @TA=25oC Max. Operating Temperature Range Storage Temperature Range TSTG ELECTRICAL CHARACTERISTICS ( At TA = 25oC unless otherwise noted ) CHARACTERISTICS Thermal Resistance Junction to Ambient Max. Instantaneous Forward Voltage at IF= 10mA SYMBOL R JA VF MIN. TYP. MAX. - - 500 o - - 0.9 Volts NOTES : 1. The JEDEC type numbers listd have a standaerd tolerance on the normal zener voltage of +10%, Suffix B=+5%.Suffix S=+2% 2. The zener impedance is derived from 1KHz AC voltage, which results when an AC current having an RMS value equal to 10% of DC zener current (IZT or IZK) is superimposed on IZT or IZK. Zener impedance is measured at two points to insure a sharp knee on the breakdown curve to eliminate unstable units. 3. Valid provided that electrodes at distance of 10mm from case are kept ambient temperature. 4. Measured under thermal equilibrium and DC test conditions. 5. The rating listd in the electrical characteristics table is maximum peak, non-repetitive, reverse surge current of 1/2 square wave or equivalent sine wave pulse of 1/120 second duration superimposed on the test current, IZT, per JEDEC registration. UNITS C/W 2003-01 ELECTRICAL CHARACTERISTICS ( MMHZ5221BPT THRU MMHZ5270BPT ) TYPE Min Zener voltage Test VZ (V) @ IZT current Nom Max Maximum Zener impedance ZZT at IZT ( ) ZZK ( ) at IZK (mA) Maximum Type Maximum reverse leakage current temperature regulator coefficient current at at o IR at VR TA= 25 C TA= 50oC o (uA) (V) VZ (%/ C) IZM (mA) Volts Volts Volts IZT (mA) MMHZ5221BPT 2.280 2.4 2.520 5 100 1800 0.25 100 1 -0.085 190 MMHZ5222BPT 2.375 2.5 2.625 5 100 1800 0.25 100 1 -0.085 182 MMHZ5223BPT 2.565 2.7 2.835 5 100 1900 0.25 75 1 -0.080 168 MMHZ5224BPT 2.660 2.8 2.940 5 100 1900 0.25 75 1 -0.080 162 MMHZ5225BPT 2.850 3.0 3.150 5 95 2000 0.25 50 1 -0.075 152 MMHZ5226BPT 3.135 3.3 3.465 5 95 2200 0.25 25 1 -0.070 138 MMHZ5227BPT 3.420 3.6 3.780 5 90 2300 0.25 15 1 -0.065 126 MMHZ5228BPT 3.705 3.9 4.095 5 90 2400 0.25 10 1 -0.060 115 MMHZ5229BPT 4.085 4.3 4.515 5 88 2500 0.25 5 1 -0.055 106 MMHZ5230BPT 4.465 4.7 4.935 5 70 2200 0.25 3 1.5 +0.030 97 MMHZ5231BPT 4.845 5.1 5.355 5 50 2050 0.25 2 2 +0.030 89 MMHZ5232BPT 5.320 5.6 5.880 5 25 1800 0.25 5 3 +0.038 81 MMHZ5233BPT 5.700 6.0 6.300 5 25 1800 0.25 5 3 +0.038 76 MMHZ5234BPT 5.890 6.2 6.510 5 10 1300 0.25 1 4 +0.045 73 MMHZ5235BPT 6.460 6.8 7.140 5 8 750 0.25 1 5.2 +0.050 67 MMHZ5236BPT 7.125 7.5 7.875 5 7 600 0.25 0.5 6 +0.058 61 MMHZ5237BPT 7.790 8.2 8.610 5 7 600 0.25 0.5 6.5 +0.062 55 MMHZ5238BPT 8.265 8.7 9.135 5 7 600 0.25 0.5 6.5 +0.065 52 MMHZ5239BPT 8.645 9.1 9.555 5 10 600 0.25 0.1 7 +0.068 50 MMHZ5240BPT 9.500 10 10.50 5 15 600 0.25 0.1 8 +0.075 45 MMHZ5241BPT 10.45 11 11.55 5 18 600 0.25 0.1 8.4 +0.076 41 MMHZ5242BPT 11.40 12 12.60 5 22 600 0.25 0.1 9.1 +0.077 38 MMHZ5243BPT 12.35 13 13.65 5 25 600 0.25 0.1 9.9 +0.079 35 MMHZ5244BPT 13.30 14 14.70 5 25 600 0.25 0.1 10 +0.082 32 MMHZ5245BPT 14.25 15 15.75 5 32 600 0.25 0.1 11 +0.082 30 MMHZ5246BPT 15.20 16 16.80 5 36 600 0.25 0.1 12 +0.083 28 MMHZ5247BPT 16.15 17 17.85 5 36 600 0.25 0.1 13 +0.084 27 MMHZ5248BPT 17.10 18 18.90 5 42 600 0.25 0.1 14 +0.085 25 MMHZ5249BPT 18.05 19 19.95 5 42 600 0.25 0.1 14 +0.086 24 MMHZ5250BPT 19.00 20 21.00 5 48 600 0.25 0.1 16 +0.086 23 MMHZ5251BPT 20.90 22 23.10 5 55 600 0.25 0.1 17 +0.087 21 MMHZ5252BPT 22.80 24 25.20 5 62 600 0.25 0.1 18 +0.088 19.1 MMHZ5253BPT 23.75 25 26.25 5 62 600 0.25 0.1 19 +0.089 18.2 MMHZ5254BPT 25.65 27 28.35 5 70 600 0.25 0.1 21 +0.090 16.8 MMHZ5255BPT 26.60 28 29.40 5 44 600 0.25 0.1 21 +0.091 16.2 MMHZ5256BPT 28.50 30 31.50 5 78 600 0.25 0.1 23 +0.091 15.1 MMHZ5257BPT 31.35 33 34.65 5 88 700 0.25 0.1 25 +0.092 13.8 ELECTRICAL CHARACTERISTICS ( MMHZ5221BPT THRU MMHZ5270BPT ) TYPE Min Zener voltage Test VZ (V) @ IZT current Nom Max Maximum Zener impedance ZZT at IZT ( ) ZZK ( ) at IZK (mA) Maximum Type Maximum reverse leakage current temperature regulator coefficient current at at o IR at VR TA= 25 C TA= 50oC o (uA) (V) VZ (%/ C) IZM (mA) Volts Volts Volts MMHZ5258BPT 34.20 36 37.80 5 95 700 0.25 0.1 27 +0.093 13.8 MMHZ5259BPT 37.05 39 40.95 5 130 800 0.25 0.1 30 +0.094 12.6 MMHZ5260BPT 40.85 43 45.15 3.0 93 900 0.25 0.1 33 +0.095 11.6 MMHZ5261BPT 44.65 47 49.35 2.7 105 1000 0.25 0.1 36 +0.095 10.6 MMHZ5262BPT 48.45 51 53.55 2.5 125 1100 0.25 0.1 39 +0.096 9.7 MMHZ5263BPT 53.20 56 58.80 2.2 150 1300 0.25 0.1 43 +0.096 8.9 MMHZ5264BPT 57.00 60 63.00 2.1 170 1400 0.25 0.1 46 +0.097 11.6 MMHZ5265BPT 58.90 62 65.10 2.0 185 1400 0.25 0.1 47 +0.097 - MMHZ5266BPT 64.60 68 71.40 1.8 230 1600 0.25 0.1 52 +0.097 - MMHZ5267BPT 71.25 75 78.75 1.7 270 1700 0.25 0.1 56 +0.098 - MMHZ5268BPT 77.90 82 86.10 1.5 330 2000 0.25 0.1 62 +0.098 - MMHZ5269BPT 82.65 87 91.35 1.4 370 2200 0.25 0.1 68 +0.099 - MMHZ5270BPT 86.45 91 95.55 1.4 400 2300 0.25 0.1 69 +0.099 - IZT (mA) 8 7 TYPICAL TC VALUES FOR MMHZ5221BPT SERIES 6 5 4 VZ @ IZT 3 2 1 0 -1 -2 -3 2 3 4 5 6 7 8 9 10 11 12 TEMPERATURE COEFFICIENT (mV/ oC) FIG. 1 - TEMPERATURE COEFFICIENTS) (TEMPERATURE RANGE 55oC TO +150oC) FIG. 2 - TEMPERATURE COEFFICIENTS) (TEMPERATURE RANGE 55oC TO +150oC) 100 TYICAL TC VALUES FOR MMHZ5221BPT SERIES VZ @ IZT 10 1 VZ, VZ, TEMPERATURE COEFFICIENT (mV/ oC) RATING CHARACTERISTIC CURVES ( MMHZ5221BPT THRU MMHZ5270BPT ) 10 100 VZ NOMINAL ZENER VOLTAGE ( V ) VZ NOMINAL ZENER VOLTAGE ( V ) FIG. 4 - TYPICAL FORWARD VOLTAGE FIG. 3 - EFFECT OF ZENER VOLTAGE ON ZENER IMPEDANCE 1000 1000 IZ= 1mA IF,FORWARD CURRENT (mA) ZZT DYNAMIC IMPEDANCE( ) TJ=25oC IZ(AC)=0.1IZ(DC) f=1KHZ 100 5mA 20mA 10 1 1 10 VZ NOMINAL ZENER VOLTAGE ( V ) 100 75V (MMHZ5267BPT) 91V (MMHZ5270BPT) 100 10 150oC 1 0.4 0.5 75oC 0.6 25oC 0.7 0o C 0.8 0.9 1.0 VF FORWARD VOLTARGE ( V ) 1.1 1.2 RATING CHARACTERISTIC CURVES ( MMHZ5221BPT THRU MMHZ5270BPT ) FIG. 5 - TYPICAL CAPACITANCE FIG. 6 - TYPICAL LEAKAGE CURRENT 1000 1000 IR,LEAKAGE CURRENT (uA) C, CAPACITANCE (pF) TA=25oC 0 V BIAS 1 V BIAS 100 BIAS AT 50% OF VZ NOM 10 1 1 10 100 10 1 0.01 25oC 0.001 -55oC 0.0001 0.00001 100 150oC 0.1 0 10 20 30 40 50 60 90 FIG. 7 - ZENER VOLTAGE VERSUS ZENER CURRENT (VZ UP TO 12V) FIG. 8 - ZENER VOLTAGE VERSUS ZENER CURRENT (12V TO 91V) 100 TA=25oC TA=25oC IZ,ZENER CURRENT IZ ZENER CURRENT (mA) 80 VZ NOMINAL ZENER VOLTAGE ( V ) 100 10 1 0.1 0.01 70 VZ NOMINAL ZENER VOLTAGE ( V ) 0 2 4 6 8 VZ ZENER VOLTAGE ( V ) 10 12 10 1 0.1 0.01 10 30 50 70 VZ ZENER VOLTAGE ( V ) 90