FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Features General Description ■ −30dB off isolation at 250MHz FSUSB20 is a low-power high-bandwidth switch specially designed for switching high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (>720MHz) of this switch allows signals to pass with minimum edge and phase distortion. Superior channel-tochannel crosstalk results in minimal interference. It is compatible with the high-speed USB 2.0 standard. ■ −30dB non-adjacent channel crosstalk at 250MHz ■ 4.5Ω typical on resistance (RON) ■ −3dB bandwidth: >720MHz ■ Low power consumption (1µA max) ■ Control input: LVTTL compatible ■ Bi-directional operation ■ USB high-speed and full-speed signaling capability ■ Space-saving Pb-free packaging Applications ■ Cell phone, PDA, digital camera, and notebook Ordering Information Order Number Package Number PbFree Top Mark FSUSB20L10X MAC010A Yes EY FSUSB20BQX MLP014A Yes USB20 FSUSB20MUX Yes MUA10A Package Description 10-Lead MicroPak™, 1.6 x 2.1mm 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm FSUSB20 10-Lead Molded Small Outline Package (MSOP), JEDEC MO187, 3.0mm Wide Pb-Free package per JEDEC J-STD-020B. MicroPak™ is a trademark of Fairchild Semiconductor Corporation. ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch September 2006 Analog Symbol OE 2B1 2B2 2A Pad Assignments for MicroPak 9 8 7 6 VCC 10 1A 1B1 1B2 2A 2B1 2B2 GND 5 2 3 4 S 1B1 1B2 1A S 1 Control OE (Top View) Truth Table Pad Assignments for DQFN S OE Function High Disconnect NC VCC X 1 14 Low Low A = B1 High Low A = B2 S 2 13 OE 1B1 3 12 2B1 NC 4 11 NC 1B2 5 10 2B2 1A 6 9 7 Pin Descriptions 2A 8 GND NC (Top Through View) Pin Name Description OE Bus Switch Enable S Select Input A Bus A B1–B2 Bus B Pin Assignment for MSOP S 1 10 VCC 1B1 2 9 OE 1B2 3 8 2B1 1A 4 7 2B2 GND 5 6 2A (Top Through View) ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 2 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Connection Diagrams The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Symbol VCC VS Parameter Supply Voltage DC Switch Voltage (1) Min. Max. Unit −0.5 +4.6 V −0.5V VCC+0.05 V +4.6 VIN DC Input Voltage −0.5 lIK DC Input Diode Current VIN < 0V −50 mA DC Output Sink Current 50 mA DC VCC /GND Current ±100 mA TSTG Storage Temperature Range −65 ESD Human Body Model IOUT ICC / IGND +150 All Pins 7000 I/O to GND 7000 °C V Notes: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions(2) Symbol Parameter VCC Power Supply Operating VIN Input Voltage VOUT Output Voltage tr,tf Input Rise and Fall Time TA Free Air Operating Temperature Min. Max. Unit 3.0 3.6 V 0 VCC V V 0 VCC Switch Control Input 0 5 Switch I/O 0 DC −40 +85° ns/V °C Notes: 2. Unused control inputs must be held HIGH or LOW. They may not float. ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 3 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Absolute Maximum Ratings Typical values are at VCC = 3.0V and TA = +25°C. TA = −40 °C to +85 °C Symbol Parameter Conditions IIN = −18mA VCC (V) Min. Typ. Units −1.2 V VIK Clamp Diode Voltage VIH HIGH Level Input Voltage 3.0 to 3.6 VIL LOW Level Input Voltage 3.0 to 3.6 0.8 V 0 ≤ VIN ≤ 3.6V 3.6 ±1.0 μA IOFF OFF-STATE Leakage Current 0 ≤ A, B ≤ VCC 3.6 ±1.0 μA RON Switch On Resistance(3) VIN = 0.8V, ION = 8mA 3.0 5.0 7.0 Ω VIN = 3.0V, ION = 8mA 3.0 4.5 6.5 Ω VIN = 0.8V, VIN = 0V–1.5V, ION = 8mA 3.0 0.3 Ω IOUT = 8mA 3.0 1.0 Ω VIN = VCC or GND, IOUT = 0 3.6 II ΔRON Input Leakage Current Delta RON RFLAT(ON) On Resistance Flatness(4) ICC Quiescent Supply Current 3.0 Max. 2.0 V 1.0 μA Notes: 3. Measured by the voltage drop between A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the two (A or B) pins. 4. Flatness is defined as the difference between the maximum and minimum value on resistance over the specified range of conditions. AC Electrical Characteristics Typical values are at VCC = 3.3V and TA = +25°C. TA = −40°C to +85°C Symbol Parameter Conditions VCC (V) Min. Typ. Figure Max. Units Number tON Turn ON Time S-to-Bus B VB = 0.8V 3.0 to 3.6 4.8 7.0 ns Figure 5 Figure 6 tOFF Turn OFF Time S-to-Bus B VB = 0.8V 3.0 to 3.6 2.2 4.0 ns Figure 5 Figure 6 tPD Propagation Delay CL = 10pF 3.0 to 3.6 0.25 ns Figure 10 OIRR Non-Adjacent OFF-Isolation f = 250MHz, RL = 50Ω 3.0 to 3.6 −26.0 dB Figure 7 XTALK Non-Adjacent Channel Crosstalk f = 250MHz, RL = 50Ω, 3.0 to 3.6 −45.0 dB Figure 8 −3dB Bandwidth RL = 50Ω, CL = 0pF 3.0 to 3.6 750 MHz Figure 9 BW RL = 50Ω, CL = 5pF ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 435 www.fairchildsemi.com 4 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch DC Electrical Characteristics Typical values are at VCC = 3.3V and TA = +25°C. TA = −40°C to +85°C Symbol Parameter Conditions VCC (V) Min. Typ. Max. Units Figure Number tSK(O) Channel-to-Channel Skew CL = 10pF 3.0 to 3.6 0.051 ns Figure 10 Figure 11 tSK(P) Skew of Opposite Transition of the Same Output CL = 10pF 3.0 to 3.6 0.020 ns Figure 10 Figure 11 Total Jitter RL = 50Ω, CL = 10pF tR = tF = 750ps at 480Mbps 3.0 to 3.6 0.170 ns TJ Capacitance Typical values are at VCC = 3.3V and TA = +25°C. TA = −40°C to +85°C Typ. Units CIN Control Pin Input Capacitance VCC = 0V 2.5 pF CON A/B ON Capacitance VCC = 3.3V, OE = 0V 12.0 pF COFF Port B OFF Capacitance VCC and OE = 3.3V 4.0 pF Symbol Parameter ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 Conditions www.fairchildsemi.com 5 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch USB Related AC Electrical Characteristics FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Typical Characteristics Frequency Response 0 -1 -2 Gain (dB) -3 -4 -5 -6 -7 -8 1 10 100 1000 10000 Frequency (MHz) CL = 0pF, VCC = 3.3V Figure 1. Gain vs. Frequency Off Isolation (dB) Frequency Response 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 1 10 100 1000 Frequency (MHz) VBIAS = 0.5V, VCC = 3.3V Figure 2. OFF Isolation ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 6 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Typical Characteristics (Continued) Crosstalk (dB) Frequency Response 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 1 10 100 1000 Frequency (MHz) VBIAS = 0.5V, VCC = 3.3V Figure 3. Crosstalk 10.0 9.0 RON (Ohms) 8.0 7.0 6.0 -40°C VB2 = 800.000mV RON = 3.561Ω -85°C VB2 = 800.000mV RON = 5.402Ω 5.0 4.0 3.0 -25°C VB2 = 800.000mV RON = 4.437Ω 2.0 1.0 0.0 0.00 0.50 1.00 1.50 2.00 2.50 3.00 VB2 (V) Figure 4. RON ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 7 A nB1 nB2 + VB – 10 pF 50Ω Control Note: Input driven by 50Ω source terminated in 50Ω GND Note: CL includes load and stray capacitance GND S OE Note: Input PRR = 1.0 MHz, tW = 500ns Figure 5. AC Test Circuit tr = 2.5ns 90% SELECT INPUT tf = 2.5ns 3.0V 90% 1.5V 1.5V 10% 10% tON GND tOFF 90% 90% VOH OUTPUT VOL Figure 6. AC Waveforms B1 Network Analyzer 50Ω A B1 A 100Ω 100Ω 50Ω B2 Network Analyzer 50Ω S Control S Control OE OE Figure 7. OFF Isolation Test Figure 8. Crosstalk Test A B Network Analyzer 50Ω S Control GND OE Figure 9. Bandwidth Test ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 8 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch AC Loading and Waveforms FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch AC Loading and Waveforms (Continued) 800 mV Input 400 mV tPLH tPHL VOH Output VOL Figure 10. Propagation Delay 800 mV 50% 50% Input 400 mV 0 tPHL tPLH VOH 50% 50% Output VOL tSK(P) = | tPHL - tPHL | Figure 11. Pulse Skew tSK(P) 800 mV 50% 50% Input 400 mV tPHL1 tPLH1 0 50% 50% Output 1 tSK(O) tSK(O) 50% 50% Output 2 tPHL2 tPLH2 tSK(O) = | tPLH1 - tPLH2 | or | tPHL1 - tPHL2 | Figure 12. Output Skew tSK(O) ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 9 Tape Format for MicroPak Dimensions are in millimeters unless otherwise noted. Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status L10X Leader (Start End) 125 (typ) Empty Sealed Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Dimension Dimensions are in millimeters unless otherwise noted. ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 10 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Tape and Reel Specifications Dimensions are in inches (millimeters) unless otherwise noted. Tape Size A B C D N W1 W2 W3 (8mm) 7.0 (177.8) 0.059 (1.50) 0.512 (13.00) 0.795 (20.20) 2.165 (55.00) 0.331 +0.059/−0.000 (8.40 +1.50/−0.00) 0.567 (14.40) W1 +0.078/−0.039 (W1 +2.00/−1.00) ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 11 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Reel Dimension for MicroPak Dimensions are in millimeters unless otherwise notes. Package Designator Tape Section Number Cavities Cavity Status Cover Tape Status BQX Leader (Start End) 125 (typ) Empty Sealed Carrier 2500/3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Dimensions Dimensions are in millimeters unless otherwise noted. ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 12 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Tape Format for DQFN FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Tape Dimensions for MSOP Dimensions are in inches (millimeters) unless otherwise specified. Reel Dimensions for MSOP Dimensions are in inches (millimeters) unless otherwise specified Tape Size A B C D N W1 W2 W3 (12mm) 13 (330) 0.059 (1.5) 0.512 (13) 0.795 (20.2) 7.008 (178) 0.448 (12.4) 0.724 (18.4) 0.468-0.606 (11.9 -15.4) ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 13 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 13. 10-Lead MicroPak, 1.6 x 2.1mm ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 14 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 14. 14-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.0mm ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 15 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch Physical Dimensions (Continued) Dimensions are in millimeters unless otherwise noted. Figure 15. 10-Lead Molded Small Outline Package (MSOP), JEDEC MO-187, 3.0mm Wide ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 16 FSUSB20 Low-Power 1-Port High-Speed USB (480Mbps) Switch ©2005 Fairchild Semiconductor Corporation FSUSB20 Rev. 1.0.2 www.fairchildsemi.com 17