ETC2 CPT-DINAV53LRSAX Energy management compact power transducer Datasheet

Energy Management
Compact Power Transducer
Type CPT-DIN “Advanced version”
• One digital output and RS485 communication port (2
wires only)
• 16 freely configurable alarms with OR/AND logic linkable
to up to 2 digital outputs
• RS422/485/RS232 communication port (MODBUSRTU), iFIX SCADA compatibility
• Class 1 (kWh), Class 2 (kvarh)
• Accuracy ±0.5 F.S. (current/voltage)
• Compact power transducer
• Instantaneous variables data format: 4 DGT
• Energies data format: 8+1 DGT
• System variables and phase measurements: VLL, VLN, A,
Amax, An, Admd, Admd max, VA, VAdmd, VAdmd max, W, Wdmd,
Wdmd max, WL1-WL2-WL3 max, var, PF, PFL1-PFL2-PFL3 min,
Hz, ASY
• Four quadrant power measurement
• Energy measurements: total and partial kWh and kvarh
(according to EN62053-21 and EN62053-23)
• Hour counter (5+2 DGT)
• TRMS meas. of distorted sine waves (voltages/currents)
• Universal power supply: 90 to 260 VAC/DC, 18 to 60 VAC/DC
• Dimensions: 45x83.5x98.5mm
• Voltage asymmetry, phase sequence, phase loss control
• Up to 3 analogue outputs (20mA or 10VDC)
• 2 digital outputs
Product Description
How to order
3-phase compact power
transducer. Particularly recommended for the measurement of the main electrical
variables also on board of
machines.
Housing for DIN-rail mount-
Model
Range code
System
Power supply
Outputs
Option
ing, with up to 3 analogue
outputs, or RS485 communication port or alarm outputs
or “Dupline” bus. Parameters
programmable by means of
CptASoft.
How to order
CPT-DIN AV5 3 H A3 AX
CptASoft-kit
CptASoft: software to program the working parameters of
the transducer and to read the energies and the instantaneous variables. The kit includes the communication cable.
Type Selection
Range codes
System
Outputs
Options
AV5:
3:
R2:
O2:
RS:
AX:
400/690VL-L/1/5(6)AAC
VL-N: 185 V to 460 V
VL-L: 320 V to 800 V
AV6: 120/208VL-L/1/5(6)AAC
VL-N: 45 V to 145 V
VL-L: 78 V to 250 V
Phase current: 0.01A to 6A
Neutral current: 0.05A to 6A
1:
1-2-3-phase,
balanced/
unbalanced load,
with or without
neutral
1-3-phase,
balanced load (*)
(*) Note: the 3-phase balanced load measurement
requires the connection of
the neutral according to fig.
15 and 16 in the final part of
this document.
Input specifications
Rated inputs
Current
Voltage
Current
Voltage
Accuracy (RS485)
(@25°C ±5°C, R.H. ≤60%)
Range accuracy: 0.02In to 0.05In
Current
System type: 3
3 (internal current transformers)
4
System type: 1
1 (internal CT)
2
Imax: 6A, Vmax: 400VLN (690VLL),
In: 5A, Vn: 230VLN (400VLL)
CT: 1, VT (PT): 1
±(0.5%FS) or ±(1%RDG+2DGT)
Specifications are subject to change without notice
A1:
A3:
V1:
V3:
S1:
S2:
DB:
2-relay outputs
2-open collector outputs
1-reed relay output +
RS485 port (2-wire)
1-analogue output:
0/4 to 20mA DC
3-analogue outputs:
0/4 to 20mA DC
1-analogue output:
0 to 10V DC
3-analogue outputs:
0 to 10V DC
RS485/RS422 port
RS232 port
Dupline bus
Neutral current
Phase-phase voltage
Phase-neutral voltage
Active and Apparent power,
Reactive power
Range accuracy: 0.05In to Imax
Current
Neutral current
Phase-phase voltage
Phase-neutral voltage
Active and Apparent power,
CPT-DINADS110706
advanced functions
Power supply
L:
H:
18 to 60 VAC/VDC
90 to 260 VAC/VDC
±(2%RDG+3DGT)
±(0.5%RDG+2DGT)
±(0.5%RDG+2DGT)
±(1.5%RDG+3DGT)
±(3%RDG+3DGT)
±(0.5%RDG+2DGT)
±(1%RDG+3DGT)
±(0.5%RDG+2DGT)
±(0.5%RDG+2DGT)
±(1%RDG+3DGT)
1
CPT-DIN
Input specifications (cont.)
Reactive power
Active energy
Reactive energy
Frequency
Additional errors
Humidity
Frequency
Temperature drift
Sampling rate
Measurement refresh time
Measurement format
Instantaneous variables
Energies
±(2%RDG+3DGT)
Class 2 according to EN62053-21
(I start up: 10mA)
Class 3 according to EN62053-23
(I start up: 10mA)
±0.1Hz (48 to 62Hz)
≤0.3% FS, 60% to 90% RH
≤0.3% FS (45 to 48Hz and 62
to 65Hz)
≤ 200ppm/°C
1600 samples/s @ 50Hz
1900 samples/s @ 60Hz
200ms
(serial communication)
4 DGT, max indication 9999
8+1 DGT, max indication
999 999 99.9
Hourcounter
Measurements
Type
Coupling type
Crest factor
Input impedance
400/690VL-L (AV5)
120/208VL-L (AV6)
Current
Frequency
Overload protection
Continuos voltage/current
For 500ms: voltage/current
5+2 DGT, max indication
9 999 9.99
Current, voltage, power,
power factor, frequency
TRMS measurement of
distorted waves.
Direct
< 3, max 10A peak
1.6 MΩ ±5%
1.6 MΩ ±5%
≤ 0.01Ω
45 to 65 Hz
(max values)
AV5: 460VLN/800VLL/6A
AV6: 145VLN/250VLL/6A
AV5: 800VLN/1380VLL/36A
AV6: 240VLN/416VLL/36A
Output Specifications
Analogue Outputs
Number of outputs
Accuracy (@ 25°C±5°C, R.H. ≤60%)
Range
Scaling factor:
Response time
Ripple
Total temperature drift
Load:
20 mADC
10 VDC
Insulation
Digital outputs
Pulse
Number of outputs
Type
Pulse duration
Alarm
Number of outputs
Alarm modes
2
Set-point adjustment
Up to 3
±0.3% FS
0 to 20mA or 0 to 10 VDC
Programmable within the
whole range of retransmission; it allows the retransmission management of all
values from: 0 and
20 mA, 0 and 10VDC
≤ 400 ms typical
(filter excluded)
≤ 1%, according to
IEC 60688-1, EN 60688-1
≤ 500 ppm/°C
≤ 350 Ω
≥ 10KΩ
By means of optocouplers,
See table “Insulation
between inputs and outputs”
Up to 2
Programmable from 0.01 to 500
pulses per kWh/kvarh (total
counters)
Outputs connectable to the
total energy meters
(Wh/varh)
≥ 100ms <120msec (ON),
≥ 120ms (OFF)
according to EN62053-31
up to 2, independent
Up alarm, down alarm, in
window alarm, out window
alarm.
Start-up deactivation function at power-on for all
kinds of alarm. All of them
connectable to all variables
(see the table “List of the
variables that can be connected to”)
Hysteresis
On-time delay
Output status
Min. response time
Note
Static outputs
Purpose
Signal
Insulation
Relay outputs
Purpose
Type
Insulation
Reed relay output
Purpose
Type
Switching voltage
Switching current
Carry current
Mechanical life
Insulation
From 0 to 100% of the
retransmitted scale
from 0 to full scale
0 to 255s
Selectable; normally
de-energized and normally
energized
≤400ms, filters excluded and
with alarm delay: “0 s”
The 2 digital outputs
can also work as one pulse
output and one alarm
output.
For alarm outputs or for pulse
outputs
VON 1.2 VDC/ max. 100 mA
VOFF 30 VDC max.
By means of optocouplers,
See table “Insulation
between inputs and outputs”
For alarm outputs or for pulse
outputs
Relay, SPST type
AC 1-5A @ 250VAC
DC 12-5A @ 24VDC
AC 15-1.5A @ 250VAC
DC 13-1.5A @ 24VDC
See table “Insulation
between inputs and outputs”
For alarm output or for pulse
output
Reed relay, SPST type NO
Max 200VDC, peak AC resistive
Max 0.5ADC, peak AC resistive
Max 2ADC, peak AC resistive
300x106 operations (1V/10mA)
See table “Insulation
between inputs and outputs”
Specifications are subject to change without notice
CPT-DINADS110706
CPT-DIN
Output Specifications (cont.)
RS422/RS485
Connections
Addresses
Protocol
Data (bidirectional)
Dynamic (reading only)
Static (writing only)
Data format
Baud-rate
Insulation
(on request)
Multidrop
bidirectional (static and
dynamic variables)
2 or 4 wires, max. distance
1200m, termination directly
on the instrument
From 1 to 255,
selectable via software
MODBUS/JBUS (RTU)
System and phase variables:
see table “List of variables...”
All the configuration parameters.
1 start bit, 8 data bit,
no parity,1 stop bit
4800, 9600,
19200, 38400 bits/s
By means of optocouplers,
See table “Insulation
between inputs and outputs”
RS232
Type
Connections
Address
Protocol
Baud-rate
Dupline
Bus
Address
Variables
Insulation
Halfduplex communication
Point to point connection
3-wire, max. distance 15m
1 to 255 selectable via software
MODBUS/JBUS (RTU)
4800, 9600, 19200,
38400 bits/s
other characteristics like
R422/RS485 port
Full Dupline compatibility
Programmable using CptASoft
kWh, kvarh + 8 variables
chosen among the
available ones.
By means of optocouplers.
See table “Insulation
between inputs and outputs”
RS232 Configuration Bus
Connections
Baud-rate
Data format
RJ12 (3-wire) for special cable
4800 bits/s
1 start bit, 8 data bit,
no parity, 1 stop bit
Insulation
By means of optocouplers,
See table “Insulation
between inputs and outputs”
CptASoft software: parameter programming and data reading
CptASoft
Working mode
Programming parameters
Multi language software to
program the working
parameters of the transducer
and to read the energies and
the instantaneous variables.
Compatibility with Windows
95/98/98SE/2000/XP.
Two different working
modes can be selected:
- management of a local
RS485 network;
- management of the
communication from single
instrument to PC (RS232);
System selection: 1-2-3
phases
CT/VT ratios
Data access
Filtering parameters
Alarm variables
Alarm set-points and relevant parameters
Variables to be connected
to the analogue outputs
Scaling of analogue outputs
Energies to be connected
to the pulse outputs
Parameters related to the
pulse outputs
Reset function: max/min
values, energies, dmd
By means of RS232 serial
port, RS485 serial port or RS232
configuration port (RJ12)
Software functions
System selection
System 3, unbalanced
System 3, balanced
System 1, balanced
3-phase (3-wire, 4-wire)
3-phase ARON
2-phase (3-wire)
1-phase (2-wire)
3-phase (3-wire, 4-wire)
3-phase (3-wire) “1CT+1VT”
3-phase (3-wire) “1CT+3VT”
3-phase (4-wire) “1CT+1VT”
3-phase (4-wire), phase to
neutral voltage measurement
1-phase (2-wire)
Specifications are subject to change without notice
Transformer ratio
CT
VT (PT)
Filter
Operating range
Filtering coefficient
Filter action
CPT-DINADS110706
1 to 60 000
1.0 to 6 000.0
0 to 100% of the
retransmitted scale
1 to 32
Measurements, alarms,
serial output
(fundamental variables: V, A,
W and their derived ones).
3
CPT-DIN
Software functions (cont.)
Alarms
Working mode
Reset
- W dmd max, VA dmd max,
A1 max, A2 max, A3 max,
WL1 max, WL2 max, WL3 max,
W sys max, A1 dmd max,
A2 dmd max, A3 dmd max,
VA sys dmd max,
W sys dmd max, PF 1 min,
PF 2 min, PF 3 min
- all the counters: total kWh,
partial kWh, total kvarh,
partial kvarh, hour counters
- reset of all the above
mentioned variables in a
single command
“OR” or “AND” or
“OR+AND” functions (see
“Alarm parameter and logic”
page). The user can freely
program up to 16 total
alarms. (out1+out2).
The alarms
can be connected to any
variables available in the
table “List of the variables
that can be connected to”
The following resets are
available by means of the
configuration software:
- all the maximum/min values:
Power Supply Specifications
AC/DC voltage
90 to 260VAC/DC
18 to 60VAC/DC
Power consumption
AC: 2.5 VA
DC: 2W
General Specifications
Front LED’s
Power on
Diagnostics
RS485/RS422/RS232
Dupline bus
Alarm outputs
Pulse outputs
Analogue outputs
Operating
temperature
Storage
temperature
Overvoltage category
Insulation (for 1 minute)
4
Green
TX data (Green)
RX data (Red)
TX data (Green)
RX data (Red)
1st output activation (Green)
2nd output activation (Red)
1st output activation (Green)
2nd output activation (Red)
Output signal within the
programmed scale (Green)
Output signal exceeding
110% of full scale (Red)
0° to +50°C (32° to 122°F)
(RH < 90% non condensing)
-10° to +60°C (14° to 140°F)
(RH < 90% non condensing)
Cat. III (IEC 60664, EN60664)
4kVACRMS
between measuring
inputs and power supply.
4kVAC/DC @ I≥ 3mA
between measuring inputs
and RS485/RS232/
programming port (RJ12)
Dielectric strength
EMC
Emissions
Immunity
Pulse voltage (1.2/50µs)
Safety standards
Mesurement standards
Approvals
Connections 5(6) A
Max cable cross sect. area
Housing
Dimensions (WxHxD)
Material
Mounting
Protection degree
Weight
4kVAC RMS between
power supply and
RS485/RS232/programming
port (RJ12)
4kVACRMS (for 1 min)
EN61000-6-3, EN60688
residential environment,
commerce and light industry
EN61000-6-2
industrial environment.
EN61000-4-5
IEC60664, IEC61010-1
EN60664, EN61010-1
IEC60688, EN60688,
EN62053-31, EN62053-23
CE, cURus
Screw-type
2.5 mm2
45 x 83.5 x 98.5 mm
ABS
self-extinguishing: UL 94 V-0
DIN-rail
IP20
Approx. 200 g (pack. incl.)
Specifications are subject to change without notice
CPT-DINADS110706
CPT-DIN
List of the variables that can be connected to:
• RS485/RS422/RS232 communication port
• Analogue outputs (“max” variables, “energies” and “hour counter” excluded)
• Alarm outputs (“max” variables, energies and “hour counter” excluded)
• Pulse outputs (only “energies”)
• Dupline bus (only “total energies” + up to 8 selectable variables)
No
Variable
1
2
3
4
5
6
7
8
9
10
11
12
V L1
V L2
V L3
V L-N sys
V L1-2
V L2-3
V L3-1
V L-L sys
A L1
A L2
A L3
Amax/
Admd max
An
W L1
W L2
W L3
W sys
var L1
var L2
var L3
var sys
VA L1
VA L2
VA L3
VA sys
PF L1
PF L2
PF L3
PF sys
Hz
Phase seq.
ASY L-N
ASY L-L
VA sys dmd
W sys dmd
A L1 dmd
A L2 dmd
A L3 dmd
VA L1 dmd
VA L2 dmd
VA L3 dmd
W L1 dmd
W L2 dmd
W L3 dmd
kWh
kvarh
hours
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
(x) = available
1-phase
system
x
o
o
o
o
o
o
o
x
o
o
x
2-phase
system
x
x
o
x
x
x
o
x
x
x
o
x
o
x
o
o
o
x
o
o
o
x
o
o
o
x
o
o
o
x
o
o
o
x
x
x
o
o
x
o
o
x
o
o
x
x
x
x
x
x
o
x
x
x
o
x
x
x
o
x
x
x
o
x
x
o
x
x
x
x
x
x
o
x
x
o
x
x
o
x
x
x
3-ph. 4-wire 3-ph. 4-wire 3-ph. 3-wire 3-ph. 3-wire
balanced sys. unbal. sys.
bal. sys.
unbal. sys.
x
x
o
o
x
x
o
o
x
x
o
o
x
x
o
o
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
o
o
o
x
o
o
o
x
o
o
o
x
o
o
o
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
o
o
o
x
o
o
o
x
o
o
o
x
o
o
o
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Notes
Sys = system
Sys = system
#
#
#
◆Highest value
among the 3-ph
◆
◆
◆
Sys = system
Sys = system
Sys = system
H
H
H
Sys = system
Sys = system ◆
Sys = system ◆
dmd = ( * )
dmd = ( * )
dmd = ( * )
dmd = ( * )
dmd = ( * )
dmd = ( * )
# dmd = ( * )
# dmd = ( * )
# dmd = ( * )
Total and partial
Total and partial
(o) = not available
(◆) These variables are available also for the MAX values stored in the EEPROM when the instrument switches off.
(H) These variables are available also for the MIN values stored in the EEPROM when the instrument switches off.
( * ) dmd value integrated in a programmed time interval.
(#) The variables are available also for the max values. When the instrument switches off, the values are not stored.
Specifications are subject to change without notice
CPT-DINADS110706
5
CPT-DIN
Alarm parameters and logic
- ON set-point.
- OFF set-point.
- ON delay.
- Logical function (AND, OR).
- Digital output (1, 2).
- Block enable.
- Controlled variable (VLN, ...).
- Alarm type (up, down, in window
alarm, out window alarm).
- Activation function.
ON alarm
In alarm 1
Off alarm
A, B, C... up to 16
parameter control
blocks.
8
Out alarm 1
In alarm 2
Out alarm 2
On alarm
OFF alarm
Activation
Up alarm
On alarm > Off alarm
Down alarm
On alarm < Off alarm
In window alarm
Out window alarm with
start up deactivation
Note: any alarm working mode can be linked to the “start up deactivation” function which disables only the first alarm after
power on of the transducer.
AND/OR logical alarm examples:
OR
AND
A: AND
A: AND
A: AND
6
B: AND
B: AND
B: AND
C: AND
C: AND
OR+AND
A: OR
A: OR
B: OR
B: OR
C: OR
C: AND
A: OR
A: OR
B: OR
B: OR
C: OR
C: AND
A: OR
A: OR
B: OR
B: OR
C: OR
C: AND
D: AND
D: AND
C: AND
D: AND
Specifications are subject to change without notice
CPT-DINADS110706
CPT-DIN
Function Description
Input and output scaling capability. Working of the analogue outputs (y) versus input variables (x)
Figure A
The sign of measured quantity and output quantity remains the same. The output
quantity is proportional to the
measured quantity.
Figure C
The sign of measured quantity and output quantity remains the same. With the
measured quantity being
zero, the output quantity
already has the value
Y1 = 0.2 Y2.
Live zero output.
0
50 A
100 A
0
50 A
100 A
0
10 mA
20 mA
4
12 mA
20 mA
Figure D
The sign of the measured
quantity changes but that of
the output quantity remains
the same. The output quantity steadily increases from
value X1 to value X2 of the
measured quantity.
Figure B
The sign of measured quantity and output quantity remains the same. On the
range X0...X1, the output
quantity is zero. The range
X1...X2 is delineated on the
entire output range Y0 =
Y1...Y2 and thus presented in
strongly expanded form.
80 V
100 V
120 V
0
5 mA
10 mA
-100 kW
0
0
100 kW
10 mA
20 mA
Insulation between inputs and outputs
Measuring
Input
Relay
Output
Measuring
input
-
4kV
Relay
output
4kV
-
Open collector output
2,5kV @
I≥ 3mA
Open collector output
Reed
relay
Dupline
output
2,5kV
2,5kV
-
-
-
-
2,5kV @
I≥ 3mA
Analogue
Output
RS232/
RS485
RS232
(RJ12)
2,5kV @
2,5kV @
2,5kV @
I≥ 3mA
I≥ 3mA
I≥ 3mA
-
-
-
-
-
-
90-260VAC/DC 18-60VCA/CC
Power supply Power supply
4kV
4kV
4kV
4kV
4kV
-
4kV
4kV
4kV
Reed
relay
2,5kV
-
-
-
-
-
100VRMS
4kV
4kV
4kV
Dupline
output
2,5kV
-
-
-
-
-
-
2,5kV
2,5kV
2,5kV
-
-
-
-
-
-
4kV
4kV
4kV
-
-
100VRMS
-
-
-
4kV
4kV
4kV
4kV
4kV
4kV
2,5kV
4kV
4kV
-
4kV
4kV
Analogue
output
RS232/
RS485
RS232
(RJ12)
2,5kV @
I≥ 3mA
2,5kV @
I≥ 3mA
2,5kV @
I≥ 3mA
90-260
VACDC
4kV
4kV
4kV
4kV
2,5kV
4kV
4kV
4kV
-
-
18-60
VAC/DC
4kV
4kV
4kV
4kV
2,5kV
4kV
4kV
4kV
-
-
NOTE: in case of fault of first insulation the current from the measuring input to the ground is lower than 2mA.
Specifications are subject to change without notice
CPT-DINADS110706
7
CPT-DIN
Waveform of the signals that can be measured
Figure B
Sine wave, indented
10...100%
Fundamental content
Harmonic content
0...90%
Frequency spectrum: 3rd to 16th harmonic
Additional error: <1% FS
Figure A
Sine wave, undistorted
100%
Fundamental content
Harmonic content
0%
1.1107 | A |
Arms =
Figure C
Sine wave, distorted
70...90%
Fundamental content
Harmonic content
10...30%
Frequency spectrum: 3rd to 16th harmonic
Additional error: <0.5% FS
Accuracy
kWh, accuracy (RDG) depending on the current
PF=1
PF=L0.5
or C0.8
Error
+2.5%
+2%
+1.5%
+1%
Class 2
0.10A
(0.02In)
0.25A
(0.05In)
0.25A
(0.05In)
0.5A
(0.1In)
Error
+4%
+3%
+2.5%
+2%
Class 3
0%
Class 2 (typ)
- 1%
+2%
+2.5%
Class 3
-1.5%
+3%
+4%
+ 1%
Class 1 (typ)
+1%
+1.5%
+2%
+2.5%
PF=L0.5
or C0.8
+1.5%
Class 2
0%
PF=1
kvarh, accuracy (RDG) depending on the current
5A (In)
6A (Imax)
sinϕ=1
5A (In)
6A (Imax)
sinϕ=0.5
Class 2 accuracy limits (Active energy) EN62053-21
5(6A) Start-up current: 10mA
0.1A
(0.02In)
0.25A
(0.05In)
0.25A
(0.05In)
0.5A
(0.1In)
5A (In)
6A (Imax)
5A (In)
6A (Imax)
Class 3 accuracy limits (Reactive energy) EN62053-23
5(6A) Start-up current: 10mA
Used calculation formulas
Phase variables
System variables
Instantaneous effective voltage
Equivalent three-phase voltage
Instantaneous active power
Voltage asymmetry
Instantaneous power factor
A S YLL =
(V L L m a x − V L L m in )
V LL ∑
ASY LN =
(V LN max − V LN min )
V LN ∑
Three-phase power factor
(TPF)
Energy metering
Three-phase reactive power
Instantaneous effective current
Neutral current
Instantaneous apparent power
An = AL1+AL2+AL3
Three-phase active power
Instantaneous reactive power
8
Three-phase apparent power
Where:
i= considered phase (L1, L2 or L3)
P= active power; Q= reactive power;
t1, t2 =starting and ending time points
of consumption recording; n= time
unit;∆t= time interval between two
successive power consumptions;
n1, n2 = starting and ending discrete
time points of consumption recording
Specifications are subject to change without notice
CPT-DINADS110706
CPT-DIN
Wiring diagrams “system type selection: 3”
1-ph, 2-wire
L1
A1
1-ph, 2-wire
Fig. 1
N
2-ph, 3-wire
Fig. 2
L2
N
L1
L1
7
L1
7
L1
7
8
N
8
N
8 10
N L2
L1
23
L1
23
L1 L2
23 25
A1
A2
A1
A2
24
L1
N
L1
A2
24
L1
F
Fig. 3
24 26
L1 L2
F
F
N
-
N
-
N
-
L
+
L
+
L
+
Power Supply
Power Supply
Power Supply
Direct connection
1CT connection
2CT connection
F= 630 mA T (18 to 60VAC/DC)
125 mA T (90 to 260VAC/DC)
3-ph, 4 wire, unbalanced load
L3
L1
7
L2
L1
Fig. 4
3-ph, 3-wire, unbalanced load
N
L3
L1
7
L3
11
3-ph, 3-wire, unbalanced load
L1
L3
L3
11
A1
A2
A2
L1 L2 L3
23 25 27
A1
A2
24 26 28
L1 L2 L3
24 26 28
L1 L2 L3
F
F
L1
10
L2
L1 L2 L3
23 25 27
L1 L2 L3
23 25 27
L2
24 26 28
L1 L2 L3
F
N
-
N
-
N
-
L
+
L
+
L
+
Power Supply
Power Supply
Power Supply
Direct connection
ARON connection
ARON and 2VT/PT connection
Specifications are subject to change without notice
Fig. 6
L3
11
L1
7
8 10
N L2
8 10
N L2
A1
L2
Fig. 5
CPT-DINADS110706
9
CPT-DIN
Wiring diagrams “system type selection: 3” (cont.)
3-ph, 4-wire, unbalanced load
L3
L2
L1
Fig. 7
3-ph, 4-wire, unbalanced load
N
L3
L3
11
L1
7
N
L3
A1
L1 L2 L3
23 25 27
A1
A2
24 26 28
L1 L2 L3
A2
24 26 28
L1 L2 L3
F
L1
10
L2
L1 L2 L3
23 25 27
A2
L2
Fig. 9
L3
11
L1
7
8 10
N L2
L1 L2 L3
23 25 27
A1
L1
3-ph, 3-wire, unbalanced load
L3
11
L1
7
8 10
N L2
L2
Fig. 8
24 26 28
L1 L2 L3
F
F
N
-
N
-
N
-
L
+
L
+
L
+
Power Supply
Power Supply
Power Supply
3CT connection
3CT and 3VT/PT connection
3CT connection
F= 630 mA T (18 to 60VAC/DC)
125 mA T (90 to 260VAC/DC)
3-ph, 3-wire, unbalanced load Fig. 10
L3
L2
3-ph, 3-wire, balanced load
L1
L3
L3
11
L1
7
L1
L3
A2
A1
A2
24
L1
24
L1
F
F
N
-
N
-
N
-
L
+
L
+
L
+
Power Supply
Power Supply
Power Supply
3CT and 2VT/PT connection
1CT connection
1CT and 1VT/PT connection
10
N
L1
23
A2
24 26 28
L1 L2 L3
F
L1
8
N
L1
23
A1
L2
Fig. 12
L1
7
10
L2
L1 L2 L3
23 25 27
A1
3-ph, 4-wire, balanced load
L3
11
L1
7
10
L2
L2
Fig. 11
Specifications are subject to change without notice
CPT-DINADS110706
CPT-DIN
Wiring diagrams “system type selection: 1”
1-ph, 2-wire
L1
N
L1
N
L1
7
A1
1-ph, 2-wire
Fig. 13
A1
3-ph, 4-wire, balanced load
L3
N
A1
A2
L1
L1
F
F
N
-
N
-
N
-
L
+
L
+
L
+
Power Supply
Power Supply
Power Supply
Direct connection
1CT connection
1CT connection
F= 630 mA T (18 to 60VAC/DC)
125 mA T (90 to 260VAC/DC)
3-ph, 4-wire, balanced load
L3
L2
L1
Fig. 16
Outputs
Analogue output 0-20mA
Analogue output 0-10V
Relay out.
N
1
5
3
+
Output
terminal
N
24
L1
24
L1
F
L1
A2
L1
24
L1
L2
Fig. 15
N
L1
7
N
L1
7
A2
Fig. 14
V1
V2
V3
2
4
6
0-10V
+
V3
+
V2
+
1
3
5
2
4
6
R1
V1
R2
L1
7
N
Fig. 17
Fig. 18
Fig. 19
NOTE: the analogue outputs are not insulated among each other.
V DC
A1
L1
24
L1
VDC
Rc
A2
Vo+
Vo+
GND
GND
F
1
3
Rc
5
1
O1
+
N
-
L
+
Power Supply
1CT and 1VT/PT connection
O2
2
4
6
GND
2
GND
Vo+
Rc
Vo+
Rc
Fig. 20
Specifications are subject to change without notice
5
+
O2
V DC
3
O1
CPT-DINADS110706
4
6
Open collector outputs: The
load resistance (Rc) must be
calculated so that the closed
contact current is lower than
100mA; the VDC voltage must
be lower than or equal to 30V.
VDC: power supply voltage
(external). Vo+: positive output
contact (open collector transistor). GND: ground output contact (open collector transistor).
VDC
Fig. 21
11
CPT-DIN
RS485 serial port and one relay connections
Last instrument
Reed
Relay
1...n Instrument
T
1
5
R3
T
1
R 3
RX TX -
T
5
1
R 3
5
SIU-PC
RS485
6
2
4
TX- TX+
RX- RX+ GND
6
2
4
TX- TX+
RX- RX+ GND
RS232
6
2
4
TX- TX+
RX- RX+ GND
GND
TX +
RX +
2-wire connection of RS485 serial port + one relay (R). The terminalization must be carried out only on the last instrument of
the network
RX TX TX- RX-
T
TX- RX-
T
TX- RX-
T
1
3
5
1
3
5
1
3
5
2
4
6
2
4
6
2
4
6
SIU-PC
RS485
TX+ RX+ GND
TX+ RX+ GND
RS232
TX+ RX+ GND
GND
TX +
RX +
Last instrument
1...n Instrument
4-wire connection of RS485 serial port, the terminalization must be carried out only on the last instrument of the network
RX TX TX- RX1
T
5
3
TX- RX1
3
T
TX- RX-
5
1
3
T
5
SIU-PC
RS485
2
6
4
TX+ RX+ GND
2
4
6
2
TX+ RX+ GND
4
RS232
6
TX+ RX+ GND
GND
TX +
RX +
Last instrument
1...n Instrument
2-wire connection of RS485 serial port, the terminalization must be carried out only on the last instrument of the network
RS232 Serial port connection
5
3
2
RX TX
12
1
3
2
4
GND
5
5
9
1
6
Easy programming
RJ12 communication port
for parameters programming. The configuration of
the transducer can be easily
performed by means of
CptASoft.
CptASoft-kit includes also
1m long connection cable
(RJ12 6-pole / RS232 9-pole
female).
6
Specifications are subject to change without notice
CPT-DINADS110706
CPT-DIN
Outputs connections
Front Panel Description
1. Front panel
2. Power ON LED
V
1
3
5
2
4
6
7 9 11
(L3)
(L1)
(N) (L2)
8 10 12
A2
23 25 27
(L1) (L2) (L3)
I 24 26 28
A1
2
3. Diagnostics LED
1
4. Configuration bus (RJ12 connector)
5. Connections screw terminals
Power ON
A
3
Power Transducer
dvanced
Diagnostics
CPT-DIN
4
5
1
3
5
2
4
6
A1
A2
V
I
7 9 11
(L3)
(L1)
(N) (L2)
8 10 12
23 25 27
(L1) (L2) (L3)
24 26 28
67.5mm
83.5mm
Dimensions
Power ON
A
Power Transducer
dvanced
Diagnostics
CPT-DIN
98.5mm
45mm
Specifications are subject to change without notice
CPT-DINADS110706
13
Similar pages