107MHz SAW Filter 26MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN10707 www.sipatsaw.com Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Unit Minimum Typical Maximum Center Frequency MHz 106.15 106.3 106.45 Insertion Loss dB - 17.5 19 1 dB Bandwidth MHz - 26.13 - 3 dB Bandwidth MHz 26.35 27.17 - 40 dB Bandwidth MHz - 32.56 35.5 Passband Variation dB - 0.6 1 Absolute Delay usec - 1.21 2 Ultimate Rejection(f0±18MHz) dB 40 43 - Material Temperature coefficient KHz/°C -8.77 Substrate Material - 128LN Ambient Temperature °C 25 Operating Temperature Range °C -40 - +85 Storage Temperature Range °C -45 - +105 DC Voltage V Input Power dBm ESD Class - 0 - - 10 1A DIP2212 (22.2x12.8x4.7mm3) Package Size Notes: 1. All specifications are based on the test circuit shown; 2. In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number LBN10707 Rev. Date 2009-04-10 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 1/3 107MHz SAW Filter 26MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN10707 www.sipatsaw.com Matching Configuration L1 INPUT 50Ω L1=L2=22nH L2 OUTPUT 50Ω C1=36pF C2=33pF Source/Load Impedance=50 ohm C2 C1 Notes - Component values may change depending on board layout. Package Dimension 22.20 0.50 Pad Configuration: 12.80 0.50 SIPAT LBN10707 XXYYZZ 1 Output 5 Ground All Others 4.70 0.50 4.50 0.50 0.45 0.05 Input Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN10707: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 2.54 0.20 5 6 1 2.54 0.20 Package: DIP2212 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 7.62 0.20 4 3 2 12.70 0.20 Part Number LBN10707 Rev. Date 2009-04-10 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 2/3 107MHz SAW Filter 26MHz Bandwidth China Electronics Technology Group Corporation No.26 Research Institute SIPAT Co., Ltd. Part Number: LBN10707 www.sipatsaw.com Typical Performance Frequency Respond Passband Respond Type Performance Type Performance -7.0288 -15.5288 -17.0288 -16.0288 -27.0288 -16.5288 -17.0288 A m plitude ripple(dB ) -47.0288 -57.0288 -67.0288 -17.5288 -18.0288 -77.0288 -18.5288 -87.0288 -19.0288 -97.0288 -107.0288 -19.5288 60 70 80 90 100 110 120 Frequency(MHz) Horizontal: 10MHz/Div 130 140 150 Vertical: 10dB/Div 60 70 80 90 100 110 Frequency(MHz) 120 Horizontal: 10MHz/Div Group Delay Variation(f0±13MHz) 130 140 150 Vertical: 0.5dB/Div Phase Linearity(f0±13MHz) Type Performance Type Performance 2000 150 1800 100 1600 50 1400 X: 93.25 Y: 9.458 X: 93.25 Y: 1277 1200 D egree(deg) G roup Delay T im e(ns ) X: 119.3 Y: 1199 X: 106.3 Y: 1175 1000 X: 119.3 Y: 8.93 X: 106.3 Y: -1.319 0 -50 800 -100 600 400 -150 95 100 105 Frequency(MHz) 110 115 Horizontal: 5MHz/Div 120 125 130 85 Vertical: 200ns/Div 90 95 100 130 ∞ 0.0 +j5.0 0.5 5.0 2.0 -j0.2 +j2.0 +j0.2 +j5.0 0.2 +j0.2 1.0 125 Vertical: 50deg/Div +j0.5 +j2.0 0.5 120 +j1.0 +j0.5 -j0.2 -j5.0 ∞ -j5.0 -j0.5 -j2.0 -j2.0 -j1.0 -j1.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 115 Smith Chart S22 +j1.0 -j0.5 110 Horizontal: 5MHz/Div Smith Chart S11 0.0 105 Frequency(MHz) 5.0 90 2.0 85 1.0 200 0.2 Magnitude(dB) -37.0288 Part Number LBN10707 Rev. Date 2009-04-10 Ver. 1.0 Fax: +86-23-62808382 Page www.sipatsaw.com / [email protected] 3/3