Nel AB-036DHCF-FREQ Pecl/lvpecl uhf vcxo Datasheet

Data Sheet 0630B
CRYSTAL CLOCK OSCILLATORS
Rev. C
PECL/LVPECL UHF VCXO
AB-X36DXXX Series
Description
The AB-X36DXXX Series of voltage controlled crystal oscillators (VCXO) provides ultra high frequency with
PECL/LVPECL complementary outputs. The outputs can be disabled for test automation or combining
multiple clocks. The device is based on low noise analog harmonic frequency multiplication, providing
exceptionally low Phase Noise and Jitter. It is packaged in a miniature, FR-4 based 9x14 mm SMD
package.
Applications and Features
• Wide frequency range – 200.0MHz to 1.000GHz
• Fiber Channel; 10 GbE; Infiniband; Network Processors; SONET/SDH
• High Reliability - NEL HALT/HASS qualified for crystal oscillator start-up conditions
• Extremely Low Phase Noise, Low Jitter
• SONET ±20ppm overall free-run stability available
• Absolute Pull Range (APR) to ±1000 ppm
• High shock resistance, to 1000g
• RoHS Compliant, Lead Free Construction
Creating a Part Number
AB - X 36D X X X - FREQ
Package Code
Absolute Pull Range, ppm
AB 6 pad 9x14mm SMD
E ±20
F ±32
Input Voltage
G ±50
0
5.0V±5%
H ±100
A
3.3V±5%
9 Customer specific
Enable Option
H
Enable High
L
Enable Low
Temperature Range, °C
A 0 to 50
B 0 to 70
C -20 to 70
D -40 to 85
9
Customer specific
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: [email protected] www.nelfc.com
Data Sheet 0630B
CRYSTAL CLOCK OSCILLATORS
Rev. C
AB-X36DXXX Series Continued
PECL/LVPECL UHF VCXO
Absolute Maximum Ratings
Parameter
Operating Temperature Range
Storage Temperature Range
Supply Voltage
Enable/Disable Voltage
Symbol
To
Tst
Vcc
Ven/dis
Value
-40 to +85
-50 to +90
-0.5 to 4.5
0 to Vcc
Unit
ºC
ºC
V
V
Electrical Parameters
Parameter
Nominal Frequency
Supply Voltage
Symb
Fo
Vcc
Supply current
Output Logic Type
Load
Icc
Output Levels
Voh
Conditions, Note
Code
Code A
Output to Vcc-2V, or
Thevenin Equivalent
overall
Vol
Duty Cycle
(Symmetry)
Rise/Fall Time
Jitter Integrated
Tr/Tf
J
Wavecrest
characterized
Sub-harmonics
Phase Noise
£(Δf)
Frequency Stability,
usually not specified unless necessary, APR
is specified to
incorporate stability
Control Voltage Range
Setability
ΔF/F
Absolute Pull Range
APR
Input Impedance
Modulation Bandwidth
Enable
Zin
Disable
Vc
Vcs
At 50% of output voltage
swing
20 to 80, 80 to 20 %
Integrated from Phase
Noise, 12 KHz to 20 MHz,
RMS
10 Hz to 80 KHz, RMS
50 Khz to 80 Mhz
Random
period,
Accumul., pkto-pk
Deterministic
MIN
200
4.75
3.135
Unit
MHz
V
60
80
mA
50
Vcc1.025
45/55
Ohm
V
50/50
Vcc1.620
55/45
%
0.5
0.1
0.7
0.2
ns
ps
1.0
0.3
2.5
ps
ps
ps
25
ps
±20
1
-50
-60
-90
-118
-135
-140
-145
±30
0V
0.4 Vcc
0.5 Vcc
622.080 MHz,
APR 50ppm
or less
Vc to set F at Fo; T, Vcc,
load - nominal, as shipped
Over all conditions, see part
# creation
@ Fmod < 100 Khz
At Vc = Vcc/2, -3dB
Pin 2 = Low, 0 to Vcc1.62V
Pin 2 = High, Vcc-1.025V
to Vcc
5.0
3.3
MAX
1000
5.25
3.465
LVPECL
@ 622.08MHz
@ 10 Hz
@100 Hz
@1 KHz
@10KHz
@100KHz
@>1MHz
Overall, including initial
calibration, temperature,
aging 10 years, shock and
vibration @ Vc=Vcc/2;
APR 50ppm, or less
TYP
-46
-55
-85
-113
-130
-135
-140
ps
dBc
dBc/Hz
ppm
Vcc
0.6 Vcc
20,32,
50,100
50
20
V
V
ppm
KOhm
KHz
Enabled
V
Disabled, Pin 4 = Logic “1",
Pin 5 = Logic “0"
V
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: [email protected] www.nelfc.com
CRYSTAL CLOCK OSCILLATORS
Rev. C
AB-X36DXXX Series Continued
PECL/LVPECL UHF VCXO
Electrical Connection
Pin
Connection
1
Vco
2
Enable/Disable
3
VEE
4
Output
5
Output Complement
6
VCC
0 .5 5 ( 1 4 m m )
0 .3 5 ( 9 m m )
0 .2 4 ( 6 .1 m m )
RECOM M ENDED PAD LAYOUT
0 .0 4 5 ( 1 .1 4 m m )
0 .0 6 0 ( 1 .5 2 m m )
0 .1 0 0 ( 5 .1 m m )
1
2
3
6
5
4
0 .0 5 0 ( 1 .2 7 m m )
0 .3 0 0 ( 7 .6 2 m m )
0 .2 0 0 ( 1 0 .2 m m )
0 .2 0 0 ( 5 .0 8 m m )
Environmental and Mechanical Characteristics
Operating temp.
range
Mechanical Shock
Thermal Shock
Vibration
Hermetic Seal
Soldering conditions
see part # table
Per MIL-STD-202, Method 213, Cond. E
Per MIL-STD-883, Method 1011, Cond. A
Per MIL-STD-883, Method 2007, Cond. A
Leak rate less than 1x10-8 atm.cc/s of helium
See MAX reflow profile below
Maximum Reflow Profile
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: [email protected] www.nelfc.com
Similar pages