MAAM-009560 RF Driver Amplifier 250 - 4000 MHz Rev. V1 Features Functional Schematic • Output Intercept Point of +42 dBm over a 20 dB Input Power Range • Broadband Operation • Lead-Free SOT-89 Package • Halogen-Free “Green” Mold Compound • RoHS* Compliant and 260°C Reflow Compatible • Class 2 ESD Rating Description The MAAM-009560 RF driver amplifier is a GaAs MMIC which exhibits exceptional linearity performance over a >20 dB dynamic range, as well as featuring high gain in a lead-free miniature SOT-89 surface mount plastic package. The device is biased with a single +5 volt supply and consumes 225 mA typically. The MAAM-009560 is fabricated using an HBT process to realize low current and high linearity. The process features full passivation for increased performance and reliability. Pin 1 RF In Pin Configuration Pin No. Function Pin No. Function 1 RF Input 3 RF Output/Bias 2 Ground Maximum Operating Conditions 3 Parameter Ordering Information 1,2 RF Out / Bias Maximum Operating Conditions Junction Temperature4 170 °C Part Number Package RF Output Power 28 dBm MAAM-009560-000000 Bulk Packaging Operating Temperature -40 °C to +85 °C MAAM-009560-TR3000 3000 piece reel MAAM-009560-001SMB Sample Board 1. Reference Application Note M513 for reel size information. 2. All sample boards include 5 loose parts. 3. These operating conditions will ensure MTTF > 1 x 106 hours. 4. Junction Temperature (TJ) = TA + Өjc * ((V * I) - (POUT - PIN)) Typical thermal resistance (Өjc) = 47° C/W a) For TA = 25°C, TJ = 73 °C @ 5 V, 225 mA, POUT = 20 dBm, PIN = 5 dBm b) For TA = 85°C, TJ = 123 °C @ 5 V, 180 mA, POUT = 20 dBm, PIN = 5.5 dBm Absolute Maximum Ratings 5,6 Parameter Absolute Maximum RF Output Power 29 dBm Voltage 6 volts Storage Temperature -65 °C to +150 °C Junction Temperature 210 °C 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. M/A-COM Technology Solutions does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-009560 RF Driver Amplifier 250 - 4000 MHz Rev. V1 Electrical Specifications: Freq. = 2140 MHz, TA = 25°C, VCC = +5 V, Z0 = 50 Ω Parameter Units Min. Typ. Max. Gain dB 14 15 — Noise Figure dB — 3 — Input Return Loss dB — 15 — Output Return Loss dB — 17 — Output P1dB dBm — 28.5 — Output IP3 dBm 40 42 — Quiescent Current mA — 220 — Current (PIN = 0 dBm) mA — 225 325 2140 MHz PCB Layout 2140 Schematic Parts List Part Value Case Style C1 1.8 pF 0402 C2 2.2 pF 0402 C3 0.1 µF 0402 C4 1000 pF 0402 C5 39 pF 0402 C6 1 pF 0402 C7 2 pF 0402 L1 3.6 nH 0402 R1, R2 0Ω 0402 Cross Section View The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 Ω lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008” (0.20 mm) yielding a 50 Ω line width of 0.015” (0.38 mm). The recommended RF metalization is 1 ounce copper. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-009560 RF Driver Amplifier 250 - 4000 MHz Rev. V1 Typical Performance Curves, 2140 MHz Configuration Gain Input Return Loss 25 0 20 -10 15 -20 10 -30 +25°C -40°C +85°C 5 0 2.10 2.12 2.14 2.16 +25°C -40°C +85°C -40 2.18 2.20 -50 2.10 2.12 Frequency (GHz) 2.14 2.16 2.18 2.20 2.18 2.20 Frequency (GHz) Output Return Loss Noise Figure 6 0 5 -10 4 -20 3 -30 +25°C -40°C +85°C 2 -40 1 -50 2.10 2.12 2.14 2.16 2.18 2.20 0 2.10 2.12 2.14 2.16 Frequency (GHz) Frequency (GHz) Output IP3 P1dB 30 60 +25°C -40°C +85°C 25 50 20 40 15 30 10 20 5 10 0 0 5 10 15 20 Output Power (dBm) 25 30 0 0 5 10 15 20 25 30 Output Power / Tone (dBm) 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAM-009560 RF Driver Amplifier 250 - 4000 MHz Rev. V1 Typical Performance Curves, 2140 MHz Configuration Current 350 Handling Procedures 300 Please observe the following precautions to avoid damage: 250 200 Static Sensitivity 150 Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these class 2 devices. 100 50 0 0 5 10 15 20 25 30 Output Power (dBm) Lead-Free SOT-89 Plastic Package† † Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Plating is 100% matte tin over copper. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions • North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400 is considering for development. Performance is based on target specifications, simulated results, • India Tel: +91.80.43537383 • China Tel: +86.21.2407.1588 and/or prototype measurements. Commitment to develop is not guaranteed. Visit www.macomtech.com for additional data sheets and product information. PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.