H HiTRON DC-DC CONVERTER 19” COMPATIBLE EUROCARD TRIPLE OUTPUT 200 WATTS SWITCHING MODE POWER SUPPLIES HDU200 SERIES FEATURES: 12/24/48VDC 2:1 INPUT RANGE 19" COMPATIBLE EUROCARD FORMAT EMI MEET CISPR PUB. 22 & FCC CLASS A MEET THE SAFETY STANDARDS CE MARKING COMPLIANCE 6U X 12HP X 160MM VMEbus STANDARD SPECIFICATION INPUT SPECIFICATION OUTPUT SPECIFICATION Input Voltage: Three 2:1 ranges option. A Range: 9-18Vdc nominal 12Vdc. B Range: 18-36Vdc nominal 24Vdc. C Range: 36-72Vdc nominal 48Vdc. Input Connector: 2pcs X DIN 41612 at rear. Input Current: @FL @NL HDU200-A: 23.0A 0.40A HDU200-B: 11.3A 0.21A HDU200-C: 5.0A 0.10A Dielectric Withstand: Meet IEC950. EMI: Meet CISPR PUB. 22 & FCC Class A. Power-on Indicator: LED at front panel. Power OK Signal: Installed. Remote (Logic) Inhibit: Installed. Reflected Ripple Current: Typ. 28mV pk-pk. Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Wattage: Typ. 200 Watts for HDU200. Output Connector: 2pcs X DIN 41612 at rear. Output Indicator: LEDs installed at front panel for all outputs. Line Regulation: Typ. 0.2%. Load Regulation: Main VO1 typ. ±1.0%. Aux. VO2 typ. ±2.0%. (M.A.) Aux. VO3 typ. ±2-3.0%. (P.R.) Noise & Ripple: Typ. 120mV peak to peak. OVP: Built-in at main VO1 and VO2 (auto-recovery). Adjustability: Available at main output VO1 and Aux. output VO2 (Mag. Amp.). Remote Sense: Available at VO1 only. Overload Protection (OLP): Fully protected against output overload & short circuit. Typ. 120-140%. Consult the factory for OLP setting. GENERAL SPECIFICATION Efficiency: Typ. 71.0-73.0% Switching Frequency: Typ. 48K Hz. Circuit Topology: Push-pull circuit. Transient Response: Typ. 0.5mS following a 25% load change. Power Density: 1.2 Watts / Cubic Inch. Operating Temperature: 0 to +50°C at full load. Storage Temperature: -20 to +85°C. Temperature Coefficient: Typ. 0.04% /°C. Cooling: Free air convection. Construction: 12HP(TE)x6Ux160mm 19" compatible Eurocard VMEbus standard. -63- OUTPUT VOLTAGE/CURRENT RATINGS CHART TRIPLE OUTPUT INPUT RANGE MDEL NO. OUTPUT VO1 @#◇ OUTPUT VO2 ▲◇@ OUTPUT VO3 ●◇■ Min. Typ. Volt. Max. Min. Typ. Volt. Max. Min. Typ. Volt. Max. Vdc HDU200-A or B or C-T033EI A: 9-18,B: 18-36,C: 36-72 6A 25A 3.3V 30A 0A 16A 5V 20A 0A 1A 12V 1.2A HDU200-A or B or C-T033EK A: 9-18,B: 18-36,C: 36-72 6A 25A 3.3V 30A 0A 16A 5V 20A 0A 1A 15V 1.2A HDU200-A or B or C-T033EM A: 9-18,B: 18-36,C: 36-72 6A 25A 3.3V 30A 0A 15A 5V 18A 0A 1A 24V 1.0A HDU200-A or B or C-T033II A: 9-18,B: 18-36,C: 36-72 6A 25A 3.3V 30A 0A 9A 0A 1A 12V 1.2A HDU200-A or B or C-T050DI HDU200-A or B or C-T050II A: 9-18,B: 18-36,C: 36-72 4A 20A 5.0V 25A 0A 20A 3.3V 25A 0A 1A 12V 1.2A A: 9-18,B: 18-36,C: 36-72 4A 20A 5.0V 25A 0A 0A 1A 12V 1.2A HDU200-A or B or C-T050KK A: 9-18,B: 18-36,C: 36-72 4A 20A 5.0V 25A 0A HDU200-A or B or C-T050MI A: 9-18,B: 18-36,C: 36-72 4A 20A 5.0V 25A 0A (HDU200-A or B or C-32) 7A 12V 7A 12V 9A 6A 15V 8A 0A 1A 15V 1.2A 3.5A 24V 4.5A 0A 1A 12V 1.2A Symbol: " " OVP built-in. "@" Adjustable. "●" Installed with Post Regulator. "■" Couple filter inductor. "◇" Floating ( or isolated) output. "▲" Magnetic Amplifier. "#" Remote sensing. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 2.1kg (4.63 lb.) INPUT & OUTPUT CONNECTORS PIN ASSIGNMENTS DC INPUT ASSIGNMENT +Vin -Vin TRIPLE OUTPUT G VO1 VO2 Pin & CNTR. P1-28 P1-30 P1-32 P2-4,6,8,10 P2-28,30 Mating connector: DIN41612-H15 Female ASSORTED SIGNAL VO3 DC COM LOG. INH. SYS Rest P2-16 P2-18,20,22,24,26 P1-8 P1-6 -64- POWER FAIL P2-14 P2-32 P1-4 +S -S