Switchable Current Regulators IXCP IXCY IXCP IXCY 10M35S 10M35S 10M45S 10M45S VAK = 350/450 V IA(P) = 2 - 100 mA Ω RDYN = 9 - 900 kΩ Symbol Test Condition Maximum Ratings VAKR TJ = 25°C to 150°C 10M35S 10M45S 350 450 V V VAGR VAGR TJ = 25°C to 150°C 10M35S 10M45S 350 450 V V VGK ±20 V ID TC = 25°C -0.3 A PD TC = 25°C 40 W -55 ... +150 -55 ... +150 260 °C °C °C 0.45/4 0.55/5 Nm/lb.in. Nm/lb.in. TJ Tstg TL MD Temperature for Soldering (max. 10 s) Mounting torque with screw M3 (TO-220) with screw M3.5 (TO-220) TO-220 AB (IXCP) A G TO-252 AA (IXCY) A K A G K Pin connections 1 = G, Control terminal; 2 and 4 = A (+) Positive terminal 3 = K (-), Negative terminal Features Symbol Test Condition Characteristic Values (TJ = 25°C unless otherwise specified) min. typ. max. VAKR RK = 300 Ω, (Fig. 4) IA(P) VD = 10 V; RK = 300 Ω; (Fig. 5) VG(off) ID = 100 µA; VD = 300 V 10M35S ID = 100 µA; VD = 400 V 10M45S Fig. 4 10M35S 10M45S 350 450 7 15 -5 -5 IAV VD= 300 V; VGK = -10 V VD= 400 V; VGK = -10 V Fig. 4 ∆VAK/∆ ∆ IA(p Dynamic resistance; VD= 10 V RK = 300 Ω; (Fig. 4) RthJC RthJA Thermal Resistance junction-to-case Thermal Resistance junction-to-ambient TO-220 TO-252 © 2000 IXYS All rights reserved 10 10M35S 10M45S 10 breakdown Resistor programmable current source V V 40 W continuous dissipation International standard packages mA On/Off switchable current source V V 25 25 Minimum of 350/450 V µA µA kΩ JEDEC TO-220 and TO-252 Applications Start-up circuits for SMPS Highly stable voltage sources Surge limiters and voltage protection Instantaneously reacting resetable fuses Soft start-up circuits 3.1 K/W 80 K/W 100 K/W 98704B (05/00) IXCP 10M35S IXCP 10M45S IXCY 10M35S IXCY 10M45S TO-220 AB Outline A (+) ID(p) G VD K (-) RK Fig. 1 Resistor RK in series with negative pin to achieve different current levels ID(P) - milliamperes 100 10 1 10 100 1000 TO-252 AA Outline 10000 Series Resistor R X - Ohms Fig. 2. Plateau current versus external resistance A (+) VD G VGK ID(p) K (-) Fig. 3. Current regulator controlled by VG Dim. ID(P) - milliamperes 1000 A A1 A2 b b1 b2 c c1 D D1 E E1 e e1 H L L1 L2 L3 100 10 1 0.1 -3.5 -3.0 -2.5 -2.0 VGS - Volts -1.5 -1.0 Fig. 4. Plateau current versus applied input voltage Millimeter Min. Max. Inches Min. Max. 2.19 2.38 0.89 1.14 0 0.13 0.64 0.89 0.76 1.14 5.21 5.46 0.46 0.58 0.46 0.58 5.97 6.22 4.32 5.21 6.35 6.73 4.32 5.21 2.28 BSC 4.57 BSC 9.40 10.42 0.51 1.02 0.64 1.02 0.89 1.27 2.54 2.92 0.086 0.094 0.035 0.045 0 0.005 0.025 0.035 0.030 0.045 0.205 0.215 0.018 0.023 0.018 0.023 0.235 0.245 0.170 0.205 0.250 0.265 0.170 0.205 0.090 BSC 0.180 BSC 0.370 0.410 0.020 0.040 0.025 0.040 0.035 0.050 0.100 0.115 IXYS reserves the right to change limits, test conditions, and dimensions. IXYS MOSFETS and IGBTs are covered by one or more of the following U.S. patents: 4,835,592 4,850,072 4,881,106 4,931,844 5,017,508 5,034,796 5,049,961 5,063,307 5,187,117 5,237,481 5,486,715 5,381,025