Lucky Light LL-463ADS Amber led Datasheet

Luckylight
6.22mm×3.68mm Rectangular Type
Amber LED
Technical Data Sheet
Part No.: LL-463ADS
Spec No.: 463
Rev No: V.3
Date: Nov./28/2006
Approved: ZHOU
Checked: Wu
Drawn: Shu
Lucky Light Electronics Co., Ltd.
Page: 1 OF 7
http://www.luckylight.cn
Luckylight
Features:
◇ High efficiency.
◇ Choice of various viewing angles
◇ Available on tape and reel.
◇ Reliable and robust.
◇ The product itself will remain within RoHS compliant Version.
Descriptions:
◇ The series is specially designed for applications requiring higher brightness.
◇ The LED lamps are available with different colors, intensities.
Applications:
◇ TV set.
◇ Monitor.
◇ Telephone.
◇ Computer.
Spec No.: 463
Rev No: V.3
Date: Nov./28/2006
Approved: ZHOU
Checked: Wu
Drawn: Shu
Lucky Light Electronics Co., Ltd.
Page: 2 OF 7
http://www.luckylight.cn
Luckylight
Package Dimension:
5.71±0.20
3.68±0.20
3.17±0.20
Light Area
Polarity
6.22±0.20
7.11±0.30
0.381
3.68
3.68
1.52
6.22±0.20
Reference Mark May
Contain A Number
25.40 Min.
1.5 Min.
CATHODE
ANODE
0.5
2.54
Part No.
Chip Material
Lens Color
Source Color
LL-463ADS
GaAsP/GaP
Orange Diffused
Amber
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25 mm (.010″) unless otherwise noted.
3. Protruded resin under flange is 1.00 mm (.039″) max.
4. Specifications are subject to change without notice.
Spec No.: 463
Rev No: V.3
Date: Nov./28/2006
Approved: ZHOU
Checked: Wu
Drawn: Shu
Lucky Light Electronics Co., Ltd.
Page: 3 OF 7
http://www.luckylight.cn
Luckylight
Absolute Maximum Ratings at Ta=25℃
Parameters
Symbol
Max.
Unit
Power Dissipation
PD
60
mW
Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP
100
mA
Forward Current
IF
25
mA
Reverse Voltage
VR
5
V
Operating Temperature Range
Topr
-40℃ to +80℃
Storage Temperature Range
Tstg
-40℃ to +85℃
Lead Soldering Temperature
[4mm (.157″) From Body]
Tsld
260℃ for 5 Seconds
Electrical Optical Characteristics at Ta=25℃
Parameters
Symbol Min.
Luminous Intensity *
Typ.
Max.
Unit
Test Condition
IV
8
15
---
mcd
IF=20mA (Note 1)
2θ1/2
---
110
---
Deg
IF=20mA (Note 2)
Peak Emission Wavelength
λp
---
610
---
nm
IF=20mA
Dominant Wavelength
λd
---
605
---
nm
IF=20mA (Note 3)
Spectrum Radiation
Bandwidth
Δλ
---
35
---
nm
IF=20mA
Forward Voltage
VF
1.60
2.00
2.40
V
IF=20mA
Reverse Current
IR
---
---
10
µA
VR=5V
Viewing Angle*
Notes:
1. Luminous Intensity Measurement allowance is ± 10%.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous
intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and
represents the single wavelength which defines the color of the device.
Spec No.: 463
Rev No: V.3
Date: Nov./28/2006
Approved: ZHOU
Checked: Wu
Drawn: Shu
Lucky Light Electronics Co., Ltd.
Page: 4 OF 7
http://www.luckylight.cn
Luckylight
Typical Electrical / Optical Characteristics Curves
(25℃ Ambient Temperature Unless Otherwise Noted)
Forward Current & Forward Voltage
Ta=25℃
Ta=25℃
Forward Current IF (mA)
100
75
50
25
0
300
1000
400 500 600 700
Wavelength λp (nm)
Luminous Intensity &
Ambient Temperature
100
10
1
-60 -40 -20 0 20 40 60 80 100
Ambient Temperature Ta (℃)
50
40
30
20
10
0
1.4 1.6 1.8 2.0 2.2 2.4 2.6
Forward Voltage VF (V)
800
Luminous Intensity & Forward Current
Relative Luminous Intensity (%)
Relative Luminous Intensity (%)
Relative Luminous Intensity (%)
Spectrum Distribution
f=1KHz
Duty=1/10
100
10
1 0
10
Forward Current Derating Curve
Forward Current IF (mA)
Ta=25℃
1000
1
2
3
10
10
10
Forward Current IF (mA)
Radiation Diagram
50
o
0
o
10
Ta=25℃
o
20
o
30
40
o
40
30
25
20
1.0
0.9
o
0.8
10
0
o
50
0.7
0
20
40
60
80 100
Ambient Temperature Ta (℃)
0.5 0.3 0.1 0 0.2 0.4 0.6
Spec No.: 463
Rev No: V.3
Date: Nov./28/2006
Approved: ZHOU
Checked: Wu
Drawn: Shu
Lucky Light Electronics Co., Ltd.
60
o
70
o
80o
90
Page: 5 OF 7
http://www.luckylight.cn
Luckylight
Reliability Test Items And Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%.
LTPD: 10%.
1) Test Items and Results:
No.
Test Item
Test
Hours/Cycles
Test Conditions
Sample
Size
Ac/Re
1
Resistance to
Soldering Heat
6 Min
Tsld=260±5℃,
Min. 5sec
25pcs
0/1
2
Thermal Shock
300 Cycles
25pcs
0/1
3
Temperature
Cycle
300 Cycles
25pcs
0/1
4
5
6
7
High
Temperature
Storage
DC Operating
Life
Low
Temperature
Storage
High
Temperature/
High Humidity
H: +100℃ 5min ∫ 10
sec
L: -10℃ 5min
H: +100℃ 15min ∫
5min
L: -40℃ 15min
1000Hrs.
Temp: 100℃
25pcs
0/1
1000Hrs.
IF=20mA
25pcs
0/1
1000Hrs.
Temp: -40℃
25pcs
0/1
1000Hrs.
85℃/85%RH
25pcs
0/1
2) Criteria for Judging the Damage:
Criteria for Judgment
Item
Symbol
Test Conditions
Min
Max
Forward Voltage
VF
IF=20mA
---
F.V.*)×1.1
Reverse Current
IR
VR=5V
---
F.V.*)×2.0
Luminous Intensity
IV
IF=20mA
F.V.*)×0.7
---
*) F.V.: First Value.
Spec No.: 463
Rev No: V.3
Date: Nov./28/2006
Approved: ZHOU
Checked: Wu
Drawn: Shu
Lucky Light Electronics Co., Ltd.
Page: 6 OF 7
http://www.luckylight.cn
Luckylight
Please read the following notes before using the product:
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change (Burn out will happen).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 The LEDs should be used within a year.
2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.
2.5 The LEDs should be used within 168 hours (7 days) after opening the package.
3. Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds
within once in less than the soldering iron capacity 25W. Leave two seconds and more
intervals, and do soldering of each terminal. Be careful because the damage of the product is
often started at the time of the hand solder.
4. Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used. It should be confirmed beforehand whether the
characteristics of the LEDs will or will not be damaged by repairing.
5. Caution in ESD
Static Electricity and surge damages the LED. It is recommended to use a wrist band or
anti-electrostatic glove when handling the LED. All devices, equipment and machinery must
be properly grounded.
Spec No.: 463
Rev No: V.3
Date: Nov./28/2006
Approved: ZHOU
Checked: Wu
Drawn: Shu
Lucky Light Electronics Co., Ltd.
Page: 7 OF 7
http://www.luckylight.cn
Similar pages