LED-40W Series– Fixed Output and Dimmable Switch Mode LED Drivers Constant Current & Constant Voltage with Isolation Black Magic Thermal Advantage™ Plastic Housing Electrical Specifications Input Voltage Range: 100-277 Vac Nom. (90-305 V Min/Max) Input Over-Voltage: Can endure 320Vac for 48 Hrs, 350Vac for 2 Hrs Frequency: 50/60 Hz Nom. (47-63 Hz Min/Max) Power Factor: >0.90 @ full load, 100V through 277V Inrush Current: <20.0 Amps max @ 230 Vac, cold start 25ºC Input Current: 0.40 Amps max Maximum Power: 40W Current Accuracy: ± 1% Over input line variation Load Regulation: ± 3% THD: < _ 20% @ full load Leakage Current: 400 µA Typical Hold Up Time: Half Cycle Output Protection: Over-Voltage, Over-Current, and Short Circuit Protection with Auto Recovery Environmental Specifications • Total Power: 40 Watts • Input Voltage: 100-277 Vac • UL Dry & Damp Location Rated • IP66 & NEMA4 • High Power Factor • UL Sign Components Manual (S.A.M. Models) Constant Current - Product Specifications Model Number Output Current (mA ±5%) Output Voltage Range (Vdc) Max Output Power (W) Max Efficiency 87% LED40W-114-C0350-XX 350 38-114 40 LED40W-100-C0400-XX 400 33-100 40 87% LED40W-089-C0450-XX 450 30-89 40 87% Maximum Case Temp. 90°C LED40W-054-C0700-XX 700 18-54 37.8 86% LED40W-048-C0830-XX 830 16-48 40 86% Minimum Starting Temp: -30ºC LED40W-045-C0900-XX 900 15-45 40 86% Storage Temperature: -40ºC to +85ºC LED40W-040-C1000-XX 1000 13-40 40 85% Humidity: 5% to 95% LED40W-036-C1100-XX 1100 12-36 40 86% Cooling: Convection LED40W-030-C1300-XX 1300 10-30 39.0 86% Vibration Frequency: 5 to 55 Hz/2g, 30 minutes LED40W-030-C1400-XX 1400 10-30 42 85% LED40W-024-C1300-XX 1300 8-24 31.2 86% Sound Rating: Class A LED40W-024-C1400-XX 1400 8-24 33.6 86% MTBF: 82,000 Hours at full load and 40ºC ambient conditions 4 per MIL-217F Notice 2 LED40W-024-C1670-XX 1670 8-24 40 86% LED40W-022-C1820-XX 1820 7-22 40 86% FCC 47CFR Part 15 Class B compliant LED40W-018-C2220-XX 2200 6-18 40 85% LED40W-015-C2680-XX 2680 5-15 40 85% Ordering Options: LED40W-013-C3080-XX 3080 4-13 40 85% -D:2-wire dimmable model dims 100% to 10%. Two extra wires included on the output side: +Purple/-Gray. This model is offers 0-10V & Resistance dimming, compatible with most quality 0-10V dimmers. See page 3. LED40W-012-C3330-XX 3330 4-12 40 84% LED40W-010-C4000-XX 4000 3-10 40 84% LED40W-009-C4450-XX 4450 3-9 40 83% EMC: -D3:3-wire dimmable model dims 100% to 10%. Three extra wires included on the output side: Yellow/Purple/Gray. This model is suitable for potentiometer dimming. See page 3. -XX indicates dimming options are available. See options below. Blank = fixed current output Constant Voltage - Product Specifications Model Number 9 1113-4450 40 83% 10 1000-4000 40 84% 12 833-3330 40 84% 13 770-3080 40 85% LED40W-015 15 670-2680 40 85% 18 550-2200 40 85% 22 455-1820 40 86% 24 418-1670 40 86% 30 350-1400 42 85% LED40W-036 36 275-1100 40 86% LED40W-040 40 250-100 40 85% LED40W-022 Specifications subject to change without notice. • LED40W-018 LED40W-024 Note: LED drivers are designed and intended to operate LED loads only. Non-LED loading may be outside the specified design limits of our LED drivers, and therefore cannot be covered by any warranty. If you desire to use our LED drivers to operate non-LED loads please contact us to discuss compatibility. Max Efficiency LED40W-009 LED40W-012 E332160 Max Output Power (W) LED40W-010 LED40W-013 Sign Components Manual Output Voltage Output Current (Vdc ±5%) Range (mA) LED40W-030 • LED40W-045 45 225-900 40 86% LED40W-048 48 208-830 40 86% LED40W-054 54 175-700 40 86% LED40W-089 89 113-450 40 87% LED40W-100 100 100-400 40 87% LED40W-114 114 88-350 40 87% • Indicates S.A.M. Class 2: US/Canada Rev 10-13-16 Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com LED40W Series SSL Solutions Faster Than The Speed Of Light® Pg 2 of 3 Dimensions - IN [mm] 5.91 Min [150 Min] 1.18 [30.0] 1.26 [32.0] 1.85 [47.0] 0.16 [4.0] 0.2 [5.0] 0.39±0.04 [10.0±1] 3.74 [95.0] INPUT White (N) Black (L) Tc = 90°C max OUTPUT Red (+) Blue (-) 0.39 [10.0] 0.39±0.04 [10.0±1] Dimming Purple (+) Gray (-) 0.39 [10.0] 1.18 [30.0] 2.76 [70.0] 5.91 Min [150 Min] Power Factor / Load (LED40W Rev E1.1 models) 1.00 0.16 [4.0] WIRE SPECS: Input Leads: 18 AWG, rated 600 V, 105C, min. Output Leads: 18 AWG, rated 300 V, 105C, min. Dimming Leads: 22 AWG, rated 300 V, 105C. All wires are stranded with solder dipped ends. Typical Efficiency / Load THD / Load (LED40W Rev E1.1 models) 25% 100% 0.95 20% 0.85 120Vac 277Vac 0.75 120Vac 277Vac 15% THD PF 0.80 95% 0.70 Efficiency 0.90 10% 90% 85% 120Vac 277Vac 80% 0.65 0.60 (LED40W Rev E1.1) 5% 75% 0.55 0.50 50% 60% 70% 80% 90% Load 100% Lifetime / Case Temperature 130 Lifetime (kHrs) 115 90 75 60 45 30 0% 50% 50 55 60 65 70 75 80 85 Case Hotspot Temperature (°C) 90 70% 80% Load 90% Safety Cert. UL/CUL CSA CE EMC Standard EN61000-3-2 EN61000-3-3 FCC, 47CFR Part 15 Standard UL8750 22.2 EN61347 Notes EN6100-4-5 2KV L-N, 8/20 μsec Surge Protection 15 0 45 60% 100% 70% 60% 70% 80% Load 90% Class C Class B UL Conditions of Acceptability See website for additional information Note: The area under the life-temperature curve represents where the driver has highly reliable operation within specification. Driver performance may drift out of published specifications as the hours of operation exceed the curve at a given temperature. Higher operating temperatures increase the chances of a failure to function. Other electrical, mechanical and environmental factors affect driver lifetime but are not represented in this calculation. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com 100% LED40W Series SSL Solutions Faster Than The Speed Of Light® Pg 3 of 3 “-D” and “-D3” Option: 0-10VDC and Resistance Dimming Parameters Minimum Typical Maximum 0 mA -2.0 V —- ———- 2 mA +15 V 10mA Source Current out of 0-10V Purple Wire Absolute Voltage Range on 0-10V (+) Yellow Wire Source Current out of Aux Yellow Wire “-D” Typical Dimming Circuit “-D3” 3-Wire Dimming Circuit 10V Output (Yellow) Dim (+) Purple LED40W-xxx-Cxxxx-D IP710 Wall Dimmer LED40W-xxx-Cxxxx-D3 Dim (-) Gray 0-10V Input (Purple) Return (Gray) 20K Potentiometer (Dimmer must be current-sink type control) Output Current / 0-10VDC Dimming Control Voltage Output Current % 100 90 80 70 60 50 40 30 20 10 0 0V 1V 2V 3V 4V 5V 6V 7V Purple-to-Gray Voltage (Vdc) 8V 9V 10V Notes: 1. 2. 3. 4. D dimmable version comes with an extra two wires on the output side: +Purple/-Gray. Compatible with most 0-10V dimmers. Recommended dimmer is Leviton IP710 or equivalent. D & D3 dimmable versions are not intended to dim below about 5% @ 0V or 10% @ 1.0V. Output will be 100% with Purple/Gray open and minimum with Purple/Gray Shorted. Thomas Research Products • 1225 Bowes Rd • Elgin, IL 60123 • T 847-515-3057 • F 847-515-3047 • www.trpssl.com