Green Power Solutions srl Via Greto di Cornigliano 6R - 16152 Genova , Italy Phone: +39-010-659 1869 Fax: +39-010-659 1870 Web: www.gpsemi.it E-mail: [email protected] GETG0062 PHASE CONTROLLED SCR Plastic case DC power supply AC drives VOLTAGE UP TO 400 V AVERAGE CURRENT 620 A SURGE CURRENT BLOCKING CHARACTERISTICS Characteristic Conditions 7 kA Value VRRM Repetitive peak reverse voltage 400 V VRSM Non-repetitive peak reverse voltage 500 V VDRM Repetitive peak off-state voltage IDRM IRRM Repetitive peak off-state current, max. Repetitive peak reverse current, max. 400 V VDRM, single phase, half wave, Tj = Tjmax VRRM, single phase, half wave, Tj = Tjmax 75 mA 75 mA ON-STATE CHARACTERISTICS IT(AV) Average on-state current Sine wave,180° conduction, Th = 55 °C 620 A IT(RMS) R.M.S. on-state current 973 A ITSM Surge on-state current Sine wave,180° conduction, Th = 55 °C Non rep. half sine wave, 50 Hz, VR = 0 V, Tj = Tjmax I²t VT(TO) I² t for fusing coordination Threshold voltage Tj = Tjmax rT On-state slope resistance Tj = Tjmax VTM Peak on-state voltage, max IH IL Holding current, max Latching current, typ On-state current IT = 1000 A , Tj = 25 °C Tj = 25 °C Tj = 25 °C 7 kA 245 kA²s 0,85 V 0,5 mΩ 1,35 V 600 mA 300 mA TRIGGERING CHARACTERISTICS VGT Gate trigger voltage Tj = 25 °C, VD = 5 V IGT Gate trigger current Tj = 25 °C, VD = 5 V 150 mA VGD Non-trigger voltage VD = 67% VRRM, Tj = Tjmax 0,30 V Pulse width 0.5 ms PGM Peak gate power dissipation PG(AV) Average gate power dissipation IFGM Peak gate current VFGM VRGM Peak gate voltage (forward) Peak gate voltage (reverse) 3,0 V 10 W 2 W 3 A 20 V 5 V SWITCHING CHARACTERISTICS di/dt Critical rate of rise of on-state current Tj = Tjmax 200 A/µs dV/dt tq Critical rate of rise of off-state voltage Tj = Tjmax 500 V/µs Turn-off time, typ Tj = Tjmax, IT = 320 A, di/dt = -12.5 A/µs VR = 100 V, VD = 67% VDRM, dV/dt = 20 V/µs µs THERMAL AND MECHANICAL CHARACTERISTICS Rth(j-c) Thermal resistance (junction to case) Double side cooled 0,075 °C/W Rth(c-h) Thermal resistance (case to heatsink) Double side cooled 0,020 °C/W Tjmax Max operating junction temperature Tstg Storage temperature F Clamping force ± 10% Mass Document GETG0062T001 150 °C -30 / 150 °C 5,2 kN 70 g GETG0062 PHASE CONTROLLED SCR Power loss - sine wave 170 1000 150 800 130 PF [W] Heatsink temperature [°C] Current rating - sine wave 110 90 180° 120° 60° 30° 600 400 200 70 30° 60° 50 0 150 90° 300 180° 120° 450 0 600 0 150 IT [A] 300 450 600 IT[A] Maximum surge current d.s. cooled On-state voltage drop 1400 1400 1200 1200 1000 1000 8 7 6 5 IITT[A] [A] ITSM [A] 90° 4 3 Tj =Tjma Tj =Tjma 800 800 600 600 2 400 1 200 0 0 1 10 100 0 0,5 1 1,5 2 VT [V] Number of cycle current pulses [n] Thermal impedance (j-c) 14 0,08 ZTH(j-c) [°C / W] 0,07 0,06 φ 24 0,05 φ 43 0,04 0,03 0,02 0,01 0 0,001 φ 3.5 mm (both sides) 0,01 0,1 1 10 100 Time [s] In the interest of product improvement Green Power Solutions reserves the right to change any specification given in this data sheet without notice. Document GETG0062T001