DDTC144ELP PRE-BIASED (R1=R2) SMALL SIGNAL SURFACE MOUNT 100mA NPN TRANSISTOR • • • • • • • Epitaxial Planar Die Construction Complementary PNP Type Available (DDTA144ELP) Ultra-Small Leadless Surface Mount Package Ideally Suited for Automated Assembly Processes Lead Free By Design/RoHS Compliant (Note 1) "Green" Device (Note 2) Qualified to AEC-Q101 Standards for High Reliability C • • • • • • R2 R1 1B Mechanical Data • • 2E 3 DFN1006-3 Case: DFN1006-3 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020C Terminal Connections: Collector Dot - See Marking Information Terminals: Finish — NiPdAu over Copper leadframe. Solderable per MIL-STD-202, Method 208 Marking Code N6, Dot denotes Collector Side Ordering Information: See Page 3 Weight: 0.001 grams (approximate) OUT B IN 1 R1 R2 IN B R1(NOM) R2(NOM) 47K 47K C OUT 3 E + Supply or GND GND (or +supply) Schematic and Pin Configuration DDTC144ELP 1 (or -supply) E 2 Component P/N Maximum Ratings C 3 (or -supply) 2 NEW PRODUCT Features Equivalent Inverter Circuit @TA = 25°C unless otherwise specified Characteristic Supply Voltage Input Voltage Output Current Symbol VCC VIN IC(max) Value 50 -10 to +40 100 Unit V V mA Symbol PD Value 250 2 500 -55 to +150 Unit mW mW/°C °C/W °C Thermal Characteristics Characteristic Power Dissipation (Note 3) Power Deration above 25°C Thermal Resistance, Junction to Ambient Air (Note 3) Operation and Storage Temperature Range Electrical Characteristics Characteristic Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Collector-Base Cut Off Current Input Voltage Output Voltage Input Current Output Current DC Current Gain Input Resistance Resistance Ratio Transition Frequency* Pder RθJA Tj, TSTG @TA = 25°C unless otherwise specified Symbol V(BR)CBO V(BR)CEO ICBO VI(OFF) VI(ON) VO(ON) II IO(OFF) G1 R1 R2/R1 fT Min 50 50 ⎯ ⎯ 3 ⎯ ⎯ ⎯ 68 32.9 0.8 ⎯ Typ ⎯ ⎯ ⎯ 1.2 1.6 ⎯ ⎯ ⎯ ⎯ 47 1 250 Max ⎯ ⎯ 0.5 0.5 ⎯ 0.3 0.18 0.5 ⎯ 61.1 1.2 ⎯ Unit V V μA V V mA μA ⎯ kΩ ⎯ MHz Test Condition IC = 10μA, IE = 0 IC = 1.0mA, IB = 0 VCB = 50V, IE = 0 VCE = 5V, IO = 100μA VO = 0.3V, IO = 2mA IO/II = 10mA/0.5mA VI = 5V VCC = 50V, VI = 0V VO = 5V, IO = 5mA ⎯ ⎯ VCE = 10V, IE = 5mA, f = 100MHz B * Characteristics of transistor only. Notes: 1. No purposefully added lead. 2. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. 3. Device mounted on FR-4 PCB, 1” x 0.85” x 0.062”; pad layout as shown on page 3 or Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. DS31245 Rev. 2 - 2 1 of 3 www.diodes.com DDTC144ELP © Diodes Incorporated PD, POWER DISSIPATION (mW) NEW PRODUCT 1,000 100 10 1 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Dissipation vs. Ambient Temperature (Note 3) DS31245 Rev. 2 - 2 2 of 3 www.diodes.com DDTC144ELP © Diodes Incorporated Ordering Information (Note 4) Notes: Device Packaging Shipping DDTC144ELP-7 DFN1006-3 3000/Tape & Reel 4. For packaging details, go to our website at http://www.diodes.com/ap2007.pdf. NEW PRODUCT Marking Information N6 N6 = Product Type Marking Code Dot Denotes Collector, Pin 3 Mechanical Details DFN1006-3 Dim Min Max Typ A 0.95 1.075 1.00 B 0.55 0.675 0.60 C 0.45 0.55 0.50 D 0.20 0.30 0.25 G 0.47 0.53 0.50 H 0 0.05 0.03 K 0.10 0.20 0.15 L 0.20 0.30 0.25 M 0.35 ⎯ ⎯ N 0.40 ⎯ ⎯ All Dimensions in mm G H A K B C M D N L Suggested Pad Layout C Dimensions Z G1 G2 X X1 Y C X1 X G2 Value (in mm) 1.1 0.3 0.2 0.7 0.25 0.4 0.7 G1 Y Z IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. DS31245 Rev. 2 - 2 3 of 3 www.diodes.com DDTC144ELP © Diodes Incorporated