Bussmann® Modular Fuseblocks BH-0 Series 0-700 Volts, 100 Amps Dimensional Data - All tolerances (± 0.25) mm (± 0.01) inches B 71.42 2.81" 54.23 2.13" Buss ® 5.33 x 6.60 .21" x .26" (Typ. 2) Catalog Symbol: BH-0 Series Base: Light-weight, high temperature thermoplastic Mounting Studs: Plated steel Nut: Plated steel Washer: Spring steel Connector: Tin-plated aluminum. One hole connector accepts 14 - 2/0 AWG copper wire. Two hole connector accepts 14 - 1/0 AWG copper wire. Agency Information: UL Recognized, Guide IZLT2, File E14853 up to 700V CSA Certified, Class 6225-01, File 47235 up to 700V Withstand Rating: 200,000A RMS Sym. or interrupting rating of fuse used, whichever is smaller. Catalog Code Description: Block Series Agency Information 0 No Agency Information 1 UL Recognition and CSA Certification 2 UL Recognition Only 3 CSA Certification Only 53.98 2.12" 11.68 x 12.95 .46" x .51" (Typ. 2) Buss ® A C 68.20 2.68" 8.64 .34" 6.35 .25" 39.62 1.56" BH - 0 X X X Wire Connector 0 No Connector 1 1 Hole for 14 - 2/0 AWG Copper Wire (for use with Base 0) 2 2 Hole for 14 - 1/0 AWG Copper Wire (for use with Base 0) Stud Size 1⁄Ω¢ - 20 2fiΩ¡§ - 18 3‹Ω• - 16 NOTES: 1. Always check applicable end use standards for required spacing between blocks, fuses or other hardware. 2. For applications above 700V, consult appropriate electrical standard for proper creepage distances, clearance distances and insulator voltage withstand ratings. CE logo denotes compliance with European Union Low Voltage Directive (50-1000Vac, 75-1500Vdc). Refer to Data Sheet: 8002 or contact Bussmann Application Engineering at 314-527-1270 for more information. 11-20-02 J02322 Form No. BH-0 Page 1 of 2 Data Sheet: 1200 Bussmann® Modular Fuseblocks BH-0 Series 0-700 Volts, 100 Amps Electrical Characteristics Fuseblock Part No. Stud Ref. Fuse Volt Rating "A" Dimensions mm / Inches "B" "C" FBP 35-60 BH-0111 ⁄Ω¢ 700V 25.41 / 1.482 162.87 / 6.412 71.42 / 2.812 FBP 70-100 BH-0121 ⁄Ω¢ 700V 38.46 / 1.514 163.68 / 6.444 72.24 / 2.844 FWA 70-100 BH-0111 ⁄Ω¢ 150V 18.21 / 0.717 143.43 / 5.647 52.00 / 2.047 FWH 35A-60A BH-0112 fiΩ¡§ 500V 27.74 / 1.092 152.96 / 6.022 61.52 / 2.422 FWH 70A-100A BH-0122 fiΩ¡§ 500V 38.86 / 1.530 164.08 / 6.460 72.64 / 2.860 FWP 35A-60A BH-0112 fiΩ¡§ 700V 57.91 / 2.280 183.13 / 7.210 91.69 / 3.610 FWP 70A-100A BH-0122 fiΩ¡§ 700V 56.72 / 2.233 105.74 / 7.163 90.50 / 3.563 FWX 35A-60A BH-0112 fiΩ¡§ 250V 27.74 / 1.092 152.96 / 6.022 61.52 / 2.422 FWX 70A-100A BH-0112 fiΩ¡§ 250V 24.97 / 0.983 15.19 / 5.913 58.75 / 2.313 JJS 70-100 BH-0111 ⁄Ω¢ 600V 25.96 / 1.022 151.18 / 5.952 59.74 / 2.352 JKS 65-100 BH-0111 ⁄Ω¢ 600V 53.17 / 2.290 183.39 / 7.220 91.95 / 3.620 KAB 35-60 BH-0112 fiΩ¡§ 250V 28.12 / 1.107 153.34 / 6.037 61.90 / 2.437 KAB 70-100 BH-0112 fiΩ¡§ 250V 26.54 / 1.045 151.77 / 5.975 60.33 / 2.375 KAC 35-60 BH-0112 fiΩ¡§ 600V 58.29 / 2.295 183.52 / 7.225 92.08 / 3.625 KAC 70-100 BH-0113 ‹Ω• 600V 64.34 / 2.530 189.48 / 7.460 98.04 / 3.860 KAX 35-60 BH-0112 fiΩ¡§ 250V 28.12 / 1.107 153.34 / 6.037 61.90 / 2.437 KAX 70-100 BH-0112 fiΩ¡§ 250V 26.54 / 1.045 151.77 / 5.975 60.33 / 2.375 KBC 35-60 BH-0112 fiΩ¡§ 600V 58.29 / 2.295 183.52 / 7.225 92.08 / 3.625 KBC 70-100 BH-0121 ⁄Ω¢ 600V 59.08 / 2.326 184.30 / 7.256 92.86 / 3.656 KBH 35-60 BH-0112 fiΩ¡§ 500V 28.12 / 1.107 153.34 / 6.037 61.90 / 2.437 KBH 65-100 BH-0121 ⁄Ω¢ 500V 39.24 / 1.545 164.47 / 6.475 73.03 / 2.875 KBP 35-100 BH-0111 ⁄Ω¢ 700V 58.29 / 2.295 183.52 / 7.225 92.08 / 3.625 LPJ 65-100 BH-0111 ⁄Ω¢ 600V 58.17 / 2.290 183.39 / 7.220 91.95 / 3.620 170M0108 thru 170M0167 BH-0112 ⁄Ω¢ 660V 44.20 / 1.74 169.42 / 6.67 77.98 / 3.070 170M0208 thru 170M0267 BH-0111 ⁄Ω¢ 660V 31.24 / 1.23 156.46 / 6.16 65.02 / 2.560 Buss Cat. No. The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications. 11-20-02 J02322 Form No. BH-0 Page 2 of 2 Data Sheet: 1200