Industrial Connectors CA-COM COM-7/0300 #1171_CA-COM_englisch_250900 1 18.10.2000, 8:20 Uhr CA-COM Introduction ITT Industries, Cannon connectors series CA-COM and CA-COM-B are derivations of connectors according to MIL-C-5015 or VG95234. They were developed especially for industrial applications. Connectors of both CA-COM series are interchangeable with the corresponding types as per MILC-5015 and VG95234, as they offer the same mounting dimensions and contact arrangements. The CA-COM and CA-COM-B connector series offer • Wall mounting receptacles • Cable connecting plugs • Box mounting receptacles • Straight plugs • Plugs 90° Wall mounting receptacles and cable connecting plugs (straight and 90°) are available with • Endbell with cable clamp • Endbell for flex tubes • Adapter combined for PG terminations acc. to DIN 46320 • Adapter for heat shrink boots Furthermore Cannon also provides the appropriate accessories like • Protective metal caps • Sash chains • Cable clamps • Cable bushings • Sealing gaskets CA-COM CA-COM-B • Threaded coupling • Mateable with all connectors according to MIL-C-5015 and series CA respectively • Either solder or crimp contacts • Contact arrangements with 1 to 37 contacts • Wire sizes from 0,14 up to 2,5 mm2 • Shells made of aluminum alloy enable to withstand high mechanical strain* • Surface protected by nickel plating • Resilient insulator (polychloroprene) for wide temperature range (–55/125°C) • Resistant against aggressive fluids like fuel, oil, etc. • Environmental by means of an adapter for PG termination, universal endbell and heat shrink boots • Min 500 mating cycles • Spray-waterproof IP67 • Bayonet coupling • Mateable with all connectors according to VG95234 and series CA-B respectively • Either solder or crimp contacts • Contact arrangements with 1 to 37 contacts • Wire sizes from 0,14 to 2,5 mm2 • Shells made of aluminum alloy enable to withstand high mechanical strain* • Surface protected by nickel plating • Resilient insulator (polychloroprene) for wide temperature range (–55/125°C) • Resistant against aggressive fluids like fuel, oil, etc. • Environmental by means of an adapter for PG termination, universal endbell and heat shrink boots • Min 500 mating cycles • Waterproof (1 bar, 12 hours) Contents Introduction ........................................... 2 Connector design .................................. 2 Technical data ........................................ 3 How to order ........................................ 4 Contact arrangements. .......................... 5 Mounting dimensions ........................... 10 Separating and coupling dimensions .... 11 Shell styles and dimensions .................. 12 Accessories ............................................ 33 Contact dimensions .............................. 37 Tools ..................................................... 38 Product safety information ................... 40 Note: * Receptacle size 14S and barrels size 18 + 20 are made of Zinc dicast material. All dimensions are in mm Subject to changes 2 #1171_CA-COM_englisch_250900 2 18.10.2000, 8:20 Uhr CA-COM Electrical data Mechanical data Rated current 20°C ambient temperature Max operating temperature acc. to DIN IEC 68, part 1 –55/125°C Contact size AWG / metric 15S 15 25 100 Mating cycles Rated current A max1) 22 22 41 74 Min separating force per contact 1 ) This applies only to the max. rated current for one contact. If several contacts in one contact arrangement are loaded with higher current the specific heat and the ambient temperature may not exceed +125°C. Rated current vs. ambient temperature Contact size metric 15S 15 25 100 Contact resistance mΩ max 6 6 3 1 Insulation resistance > 1000 MΩ Air and creepage paths mm (min) Instr. 0,7 0,7 A 1,1 1,1 Test force N 35 35 55 80 Coupling torque The allowable coupling torque has to be tested under harnessed conditions Contact resistance (Millivolt test) Voltage class Air path mm Creepage path mm Separating force N 1,0 1,0 1,5 3,0 Contact retention Test force to be applied in mating direction Contact size metric 15S 15 25 100 Contact size metric 15S 15 25 100 min 500 D 2,8 2,8 Operating Voltage and connector usage When the connectors in this catalogue are used for voltages greater than 50 Volts and have touchable conductive shell parts they must be used in accordance with the safety regulations DIN VDE Part 410; IEC 603644-41. This regulation basically dictates that the power source should be turned off before any mating and unmating of the connector, this regulation does not provide for protection against electrical shock when mating and unmating the connectors in the live condition. Shell size 10SL 12S 14S 16S/16 18 20 22 24 28 32 36 Allowable coupling torque Closing and opening Opening (N max) (N min) CA-COM CA-COM-B CA-COM, CA-COM-B 3,0 2,6 0,15 2,8 2,8 0,23 5,9 3,0 0,35 7,0 3,5 0,46 8,0 4,0 0,58 9,0 4,5 0,7 10,6 5,0 0,8 12,9 6,0 0,8 16,7 7,0 0,92 18,1 8,5 1,02 23,9 10,0 1,05 Materials Shell Contacts Insulator Aluminum alloy, Zinc dicast nickel plated Copper alloy, silver plated Polychloroprene 3 #1171_CA-COM_englisch_250900 3 18.10.2000, 8:20 Uhr CA-COM CA CA How to order 06 06 COM-E COM-E 18-1 18-1 P P W xx W - B - xx Series CA - Cannon designation Shell style 00 - Wall mount receptacle 01 - Cable connecting plug 02 - Box mount receptacle 20 - Box mount receptacle for rear wall mounting (Bayonett coupling only) 06 - Plug, straight 08 - Plug 90° Class COM-E - Endbell with cable clamp 1) COM-F - Endbell for flex tube COM-PG - Adapter for PG termination, environmental COM-L - PCB Solder termination COM-IN - universal endbell Shell size 10SL, 12S, 14S, 16, 16S, 18, 20, 22, 24, 28, 32*, 36* (* = upon request) Contact arrangement see pages 6 – 8 Contact type P - Pin contact S - Socket contact Alternate insert position Insert insulator position – see page 9 Coupling B - Bayonet coupling - without designation: threaded coupling Modification 01 - metric crimp contacts 03 - Adapter for heat shrink boots and metric crimp contacts (only for bayonet coupling by shell style 01 + 06 class -E) 06 - Adapter for heat shrink boots and solder contacts (only for bayonet coupling by shell style 01 + 06 class -E) 44 - with end ring and grommet (for class E and F only) 48 - F-Endbell with O-ring DN - Adapter for heat shrink boots and solder contacts (Mod. for threaded coupling) F0 - without contacts (to be ordered separately) 1 ) except shell style 02 / 20 All dimensions are in mm Subject to changes 4 #1171_CA-COM_englisch_250900 4 18.10.2000, 8:20 Uhr CA-COM Contact arrangements On pages 6 – 8 the contact arrangements are shown by shell sizes. The table below gives an overview on the number of contacts, recommended contact and wire sizes and the service rating class. Other contact arrangements acc. to MIL-C-5015 and VG 95234 upon request. Shell size 10SL 12S 14S 16 16S 18 20 22 24 28 Contact arrangement 10SL-3 10SL-4 12SA10 14S-2 14S-5 14S-6 14SA7 16-10 16S-1 18-1 Number of contacts 3 2 4 4 5 6 7 3 7 10 Contact size metric 15S 15S 15S 15S 15S 15S 15S 25 15S 15 Wire size mm2 0,75 – 1,5 0,75 – 1,5 0,75 – 1,5 0,75 – 1,5 0,75 – 1,5 0,75 – 1,5 0,75 – 1,5 2,0 – 3,0 0,75 – 1,5 0,75 – 1,5 18-8 18-10 18-11 18-12 20-15 20-17 7+1 4 5 6 7 1 5 3 14 17 19 14 8 24 35 15 + 25 25 25 15 25 15 25 100 15 15 15 15 25 15 15 1 – 1,5 + 2,5 2,0 – 3,0 2,0 – 3,0 0,75 – 1,5 2,0 – 3,0 0,75 – 1,5 2,0 – 3,0 10 0,75 – 1,5 0,75 – 1,5 0,75 – 1,5 0,75 – 1,5 2,0 – 3,0 0,75 – 1,5 0,75 – 1,5 20-19 20-27 20-29 22-14 22-19 22-23 24-28 28-15 Service rating nach IEC A A A Inst. Inst. Inst. Inst. A A A (B, C, F, G) Inst. (all others) A A A A A A A A A A A A D (H) Inst. A Additional contact arrangements (per MIL-C-5015 and VG95234) upon request. Wire selection Contact size Metric 15S 15 25 100 Wire sizes for crimp and solder contacts Metric Conductor mm2 ∅ mm2 0,75 – 1,5 1,6 – 3,3 0,75 – 1,5 1,6 – 3,3 2,0 – 3,0 2,9 – 4,3 10,0 4,2 – 6,5 Stripping lengths of wires Strip wires carefully. Do not damage conductors and insulation. For solder connections, wires have to be pretinned. Do not twist conductors used in crimp contacts, otherwise no perfect crimp connection will be achieved. Do not touch conductors before crimping. Film of grease or lubricants on the strands will cause poor crimp quality. Stripping length for contacts sizes 15S, 15 and 25 is 6,2 mm. 5 #1171_CA-COM_englisch_250900 5 18.10.2000, 8:20 Uhr CA-COM Contact Arrangements Contact arrangement Contact size metric Service rating 3 10SL-3 15S A - - - - 6 9 2 10SL-4 15S A - - - - 4 6 4 12SA10 15S A - - - - 6 8 4 14S-2 15S Inst. - 120 240 - 7 11 5 14S-5 15S Inst. - 110 - - 9 13 6 14S-6 15S Inst. - - - - 11 15 7 14SA7 15S Inst. - - - - 10 15 7 16S-1 15S A - - - - 14 19 3 16-10 25 A 90 180 270 - 17 24 No. of contacts Insulator position W X Y Insulator weight (g) including contacts pin socket All dimensions are in mm Subject to changes 6 #1171_CA-COM_englisch_250900 Z 6 18.10.2000, 8:20 Uhr CA-COM Contact Arrangements Contact arrangement Contact size metric Service rating 10 18-1 15 A (B, C, F, G) 70 145 - 8 1 7 18-8 15 25 A 70 - 4 18-10 25 A - 5 18-11 25 A 6 18-12 15 7 No. of contacts Insulator position W X Y Z Insulator weight (g) including contacts pin socket 290 24 37 - 290 18 30 120 240 - 13 22 - 170 265 - 31 40 A 80 - - 280 15 25 20-15 25 A 80 -. - 280 27 46 6 1 5 20-17 15 25 A 90 180 270 - 20 33 3 20-19 100 A 90 180 270 - 33 46 14 20-27 15 A 35 110 250 325 26 42 7 #1171_CA-COM_englisch_250900 7 18.10.2000, 8:20 Uhr CA-COM Contact Arrangements Contact arrangement Contact size metric Service rating 17 20-29 15 A 80 - - 280 29 19 22-14 15 A 80 - - 280 30 50 14 22-19 15 A 80 110 250 280 28 47 8 22-23 25 D(H) A (all others) 35 - 250 - 34 54 24 24-28 15 Inst. 80 110 250 280 40 65 35 28-15 15 A 80 110 250 280 54 90 37 28-21 15 A 80 110 250 280 58 93 No. of contacts Insulator positions W X Y Insulator weight (g) including contacts pin socket 47 All dimensions are in mm Subject to changes 8 #1171_CA-COM_englisch_250900 Z 8 18.10.2000, 8:20 Uhr CA-COM Alternate insert positions Alternate insert positions are available to prevent cross-plugging of adjacent connectors. The standard position is without designation. All other insert positions are designated W, X, Y and Z. See table below. View on mating face of pin insert Contact arrangement 10SL-3 10SL-4 12SA10 14S-2 14S-5 14S-6 14SA7 16S-1 16-10 18-1 18-8 18-10 18-11 18-12 20-15 20-17 20-19 20-27 20-29 22-14 22-19 22-23 24-28 28-15 28-21 W X Y Z 90 70 70 80 80 90 90 35 80 80 80 35 80 80 80 120 110 180 145 120 170 180 180 110 110 110 110 110 240 270 240 265 270 270 250 250 250 250 250 250 290 290 280 280 325 280 280 280 280 280 280 9 #1171_CA-COM_englisch_250900 9 18.10.2000, 8:20 Uhr CA-COM Mounting dimensions Mounting holes for connectors styles CA00COM/CA00COM-B, CA02COM/ CA02COM-B and CA20COM-B Shell size 10SL 12S 14S 16S/16 18 20 22 24 28 32 36 CA-COM Threaded D H12 CA00... CA02... CA20... 16,0 16,4 19,1 16,4 22,3 19,7 25,5 22,9 28,7 26,1 31,8 29,5 35,0 32,7 38,2 36,0 44,5 42,0 50,9 48,3 57,2 53,1 d H13 E-0,15 3,4 3,4 3,4 3,4 3,4 3,4 3,4 3,9 3,9 4,6 4,6 18,2 20,6 23,0 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 d H13 3,4 3,4 3,4 3,4 3,4 3,4 3,4 3,9 3,9 4,6 4,6 All dimensions are in mm Subject to changes 10 #1171_CA-COM_englisch_250900 CA-COM-Bayonet D H12 CA00... CA02... CA20... 18,5 16,4 21,7 16,4 24,9 19,7 27,7 22,9 31,1 26,1 34,5 29,5 37,8 32,7 41,3 36,0 47,1 42,0 53,8 48,3 60,0 53,1 10 18.10.2000, 8:21 Uhr CA-COM Separating and coupling dimensions CA06COM-E CA06COM-E-B CA02COM-E CA02COM-E-B CA08COM-E CA08COM-E-B CA06COM-E-DN CA06COM-E-B-03/-06 CA06COM-F CA06COM-F-B CA02COM-E CA02COM-E-B CA06COM-E-DN CA06COM-E-B CA02COM-E CA20COM-E CA02COM-E-B CA20COM-E-B CA06COM-PG CA06COM-PG-B Shell size 10SL 12S 14S 16S 16 18 20 22 24 28 32 36 A min 70 70 70 70 80 80 80 80 110 110 110 110 B min 70 75 75 90 100 100 100 100 120 120 180 190 C min 65 65 65 65 70 70 70 70 90 90 90 100 D min 80 80 80 80 100 110 110 110 120 120 120 130 E min 70 75 75 65 90 95 95 95 105 105 115 120 F min 65 70 80 80 100 110 110 110 120 120 120 130 H max 3,5 3,5 3,5 3,5 3,5 3,5 3,5 3,5 5,0 5,0 6,0 6,0 11 #1171_CA-COM_englisch_250900 11 18.10.2000, 8:21 Uhr CA-COM Wall mounting receptacle, Class PG CA00COM-PG-B with bayonet coupling CA00COM-PG-B is a wall mounting receptacle for usage of PG terminations. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin insert* CA00COM-PG10SL-**-P*-BCA00COM-PG12S-**-P*-BCA00COM-PG14S-**-P*-BCA00COM-PG16S-**-P*-BCA00COM-PG16-**-P*-BCA00COM-PG18-**-P*-BCA00COM-PG20-**-P*-BCA00COM-PG22-**-P*-BCA00COM-PG24-**-P*-BCA00COM-PG28-**-P*-BCA00COM-PG32-**-P*-BCA00COM-PG36-**-P*-B- A –0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 B Thread PG9 PG9 PG11 PG13,5 PG13,5 PG13,5 PG16 PG16 PG16 PG21 PG29 PG29 C max 18 18 22 24 24 25 27 27 27 32 41 41 D +0,4 18,2 18,2 18,2 18,2 21,5 23,05 23,05 23,05 23,05 24,05 24,05 24,05 E ± 0,2 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 F max 56 56 56 58 66 73 74 77 77 78 78 89 G ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 H ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 J M4 M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 CA00COM-PG with threaded coupling CA00COM-PG is a wall mounting receptacle for usage of PG terminations. It mates with plugs CA06COM and CA08COM. Part No. Pin insert* CA00COM-PG10SL-**-P* CA00COM-PG12S-**-P* CA00COM-PG14S-**-P* CA00COM-PG16S-**-P* CA00COM-PG16-**-P* CA00COM-PG18-**-P* CA00COM-PG20-**-P* CA00COM-PG22-**-P* CA00COM-PG24-**-P* CA00COM-PG28-**-P* CA00COM-PG32-**-P* CA00COM-PG36-**-P* A Thread 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 2-1/4-16UN-2A B Thread PG9 PG9 PG11 PG13,5 PG13,5 PG13,5 PG16 PG16 PG16 PG21 PG29 PG29 C max 18 19 22 24 24 25 27 27 27 32 41 41 D +0,4 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 E ± 0,3 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 F max 52 52 52 54 64 69 70 73 74 74 76 87 G ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 H ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 I +0,2/–0,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,7 3,7 4,4 4,4 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) All dimensions are in mm Subject to changes 12 #1171_CA-COM_englisch_250900 12 18.10.2000, 8:21 Uhr CA-COM Wall mounting receptacle, Class E CA00COM-E-B with bayonet coupling CA00COM-E-B is a wall mounting receptacle with endbell and cable clamp. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin Insert* CA00COM-E10SL-**-P*-BCA00COM-E12S-**-P*-BCA00COM-E14S-**-P*-BCA00COM-E16S-**-P*-BCA00COM-E16-**-P*-BCA00COM-E18-**-P*-BCA00COM-E20-**-P*-BCA00COM-E22-**-P*-BCA00COM-E24-**-P*-BCA00COM-E28-**-P*-BCA00COM-E32-**-P*-BCA00COM-E36-**-P*-B- B1) +0,4 7,9 7,9 11,1 14,2 14,2 15,8 19,0 19,0 23,7 23,7 31,8 34,6 A –0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 C +0,4 18,2 18,2 18,2 18,2 21,5 23,05 23,05 23,05 23,05 24,05 24,05 24,05 D +0,2 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 E max 57 57 59 60 68 72 72 72 78 79 78 78 F ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 G ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 H M4 M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 CA00COM-E with threaded coupling CA00COM-E is a wall mounting receptacle with endbell and cable clamp. It mates with plugs CA06COM and CA08COM. Part No. Pin Insert* CA00COM-E10SL-**-P* CA00COM-E12S-**-P* CA00COM-E14S-**-P* CA00COM-E16S-**-P* CA00COM-E16-**-P* CA00COM-E18-**-P* CA00COM-E20-**-P* CA00COM-E22-**-P* CA00COM-E24-**-P* CA00COM-E28-**-P* CA00COM-E32-**-P* CA00COM-E36-**-P* A Thread 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 2-1/4-16UN-2A B1) +0,4 7,9 7,9 11,1 14,2 14,2 15,8 19,0 19,0 23,7 23,7 31,8 34,6 C ± 0,3 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 D max 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 E ± 0,1 53 53 55 56 66 68 68 68 76 76 76 76 F ± 0,3 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 G +0,2 /–0,1 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 H 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,7 3,7 4,4 4,4 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 1 ) max cable dia 13 #1171_CA-COM_englisch_250900 13 18.10.2000, 8:21 Uhr CA-COM Wall mounting receptacle, Class F CA00COM-F-B with bayonet coupling CA00COM-F-B is a wall mounting receptacle with endbell for flex tubes. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin insert* CA00COM-F10SL-**P*-BCA00COM-F12S-**P*-BCA00COM-F14S-**P*-BCA00COM-F16S-**P*-BCA00COM-F16-**P*-BCA00COM-F18-**P*-BCA00COM-F20-**P*-BCA00COM-F22-**P*-BCA00COM-F24-**P*-BCA00COM-F28-**P*-BCA00COM-F32-**P*-BCA00COM-F36-**P*-B- A –0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 B1) 8,2 8,2 11,1 14,3 14,3 16,7 19,8 19,8 25,4 27,0 32,5 35,7 C Thread 5/8-24UNEF-2A 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-3/16-18UNEF-2A 1-3/16-18UNEF-2A 1-7/16-18UNEF-2A 1-7/16-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A D min 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 11,0 11,8 E +0,4 18,2 18,2 18,2 18,2 21,5 23,05 23,05 23,05 23,05 24,05 24,05 24,05 F ± 0,2 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 G max 50 50 50 50 57 59 59 62 62 64 64 66 H ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 I ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 K M4 M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 CA00COM-F with threaded coupling CA00COM-F is a wall mounting receptacle with endbell for flex tubes. It mates with plugs CA06COM and CA08COM. Part No. Pin Insert* CA00COM-F10SL-**-P* CA00COM-F12S-**-P* CA00COM-F14S-**-P* CA00COM-F16S-**-P* CA00COM-F16-**-P* CA00COM-F18-**-P* CA00COM-F20-**-P* CA00COM-F22-**-P* CA00COM-F24-**-P* CA00COM-F28-**-P* CA00COM-F32-**-P* CA00COM-F36-**-P* A Thread 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 2-1/4-16UN-2A B1) 8,2 8,2 11,1 14,3 14,3 16,7 19,8 19,8 25,4 27,0 32,5 35,7 C Thread 5/8-24UNEF-2A 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-3/16-18UNEF-2A 1-3/16-18UNEF-2A 1-7/16-18UNEF-2A 1-7/16-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A D min 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 11,0 11,8 E +0,4 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 F ± 0,3 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 G max 45 45 45 45 54 54 55 58 59 60 62 64 H ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 I ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 K +0,2/–0,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,7 3,7 4,4 4,4 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 1 ) max cable dia All dimensions are in mm Subject to changes 14 #1171_CA-COM_englisch_250900 14 18.10.2000, 8:21 Uhr CA-COM Wall mounting receptacle, Class E CA00COM-E-B/-03/-06 with bayonet coupling CA00COM-E-B/-03/-06 is a wall mounting receptacle (wire sealing) for heat shrink boots. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin Insert* CA00COM-E10SL-**-P*-BCA00COM-E12S-**-P*-BCA00COM-E14S-**-P*-BCA00COM-E16S-**-P*-BCA00COM-E16-**-P*-BCA00COM-E18-**-P*-BCA00COM-E20-**-P*-BCA00COM-E22-**-P*-BCA00COM-E24-**-P*-BCA00COM-E28-**-P*-BCA00COM-E32-**-P*-BCA00COM-E36-**-P*-B- A –0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 45,7 53,4 59,6 B +0,4 18,2 18,2 18,2 18,2 21,5 23,05 23,05 23,05 23,05 24,05 24,05 24,05 C ± 0,3 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 D 1) 7,7 7,9 10,6 13,5 13,5 14,6 18,7 20,8 24,6 27,0 33,3 38,5 E max 13,3 13,3 17,0 21,9 21,9 21,9 26,2 26,2 34,5 34,5 43,6 43,6 F ± 0,2 15,5 15,5 19,1 23,9 23,9 23,9 29,6 29,6 37,8 37,8 47,8 47,8 G ± 0,5 11,7 11,7 11,7 11,7 11,5 11,5 12,7 12,7 12,7 12,7 15,2 15,2 H max 53 53 53 53 61 62 64 64 64 66 69 70 I ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 K ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 L M4 M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 CA00COM-E-DN with threaded coupling CA00COM-E-DN is a wall mounting receptacle with endbell (wire sealing) for heat shrink boots. It mates with plugs CA06COM and CA08COM. Part No. Pin Insert* CA00COM-E10SL-**-P*-DN CA00COM-E12S-**-P*-DN CA00COM-E14S-**-P*-DN CA00COM-E16S-**-P*-DN CA00COM-E16-**-P*-DN CA00COM-E18-**-P*-DN CA00COM-E20-**-P*-DN CA00COM-E22-**-P*-DN CA00COM-E24-**-P*-DN CA00COM-E28-**-P*-DN CA00COM-E32-**-P*-DN CA00COM-E36-**-P*-DN A Thread 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 2-1/4-16UN-2A B +0,4 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 C ± 0,3 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 D1) 7,7 7,9 10,6 13,5 13,5 14,6 14,6 20,8 24,6 27,0 33,3 38,5 E max 13,3 13,3 17,0 21,9 21,9 21,9 26,2 26,2 34,5 34,5 43,6 43,6 F ± 0,2 15,5 15,5 19,1 23,9 23,9 23,9 23,9 29,6 37,8 37,8 47,8 47,8 G ± 0,5 11,7 11,7 11,7 11,7 11,5 11,5 12,7 12,7 12,7 12,7 15,2 15,2 H max 49 49 49 49 58 58 60 60 63 63 67 68 I ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 27,0 31,8 34,9 39,7 44,5 49,2 K ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 35,0 41,0 44,5 50,8 57,0 63,5 L +0,2/–0,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,7 3,7 4,4 4,4 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 1 ) max cable dia 15 #1171_CA-COM_englisch_250900 15 18.10.2000, 8:21 Uhr CA-COM Cable connecting plug, Class PG CA01COM-PG-B with bayonet coupling CA01COM-PG-B is a cable connecting plug for usage of PG terminations. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin Insert* CA01COM-PG10SL-**-P*-B CA01COM-PG12S-**-P*-B CA01COM-PG14S-**-P*-B CA01COM-PG16S-**-P*-B CA01COM-PG16-**-P*-B CA01COM-PG18-**-P*-B CA01COM-PG20-**-P*-B CA01COM-PG22-**-P*-B CA01COM-PG24-**-P*-B CA01COM-PG28-**-P*-B CA01COM-PG32-**-P*-B CA01COM-PG36-**-P*-B A –0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 B Thread PG9 PG9 PG11 PG13,5 PG13,5 PG13,5 PG16 PG16 PG16 PG21 PG29 PG29 C max 18 19 22 24 24 25 27 27 27 32 41 41 D +0,4 18,2 18,2 18,2 18,2 18,2 23,05 23,05 23,05 23,05 24,05 24,05 24,05 E ± 0,2 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 F max 56 56 56 58 66 73 74 77 77 78 78 89 G max 25,2 27,8 29,8 32,3 32,3 34,8 37,8 41,1 44,6 50,9 57,1 63,6 H ± 0,2 20,6 23,8 25,4 28,6 28,6 31,7 34,9 38,1 41,3 47,6 54,0 60,6 CA01COM-PG with threaded coupling CA01COM-PG is a cable connecting plug for usage of PG terminations. It mates with plugs CA06COM and CA08COM. Part No. Pin Insert* CA01COM-PG10SL-**-P* CA01COM-PG12S-**-P* CA01COM-PG14S-**-P* CA01COM-PG16S-**-P* CA01COM-PG16-**-P* CA01COM-PG18-**-P* CA01COM-PG20-**-P* CA01COM-PG22-**-P* CA01COM-PG24-**-P* CA01COM-PG28-**-P* CA01COM-PG32-**-P* CA01COM-PG36-**-P* A Thread 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 2-1/4-16UN-2A B Thread PG9 PG9 PG11 PG13,5 PG13,5 PG13,5 PG16 PG16 PG16 PG21 PG29 PG29 C max 18 19 22 24 24 25 27 27 27 32 41 41 D +0,4 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 E ± 0,3 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 F max 52 52 52 54 64 69 70 73 74 74 76 87 G max 21,8 25,0 28,2 31,4 31,4 34,5 37,7 40,9 43,8 50,4 56,8 63,1 H max 16,2 19,4 22,5 25,7 25,7 28,9 32,1 35,2 38,4 44,8 51,1 57,5 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) All dimensions are in mm Subject to changes 16 #1171_CA-COM_englisch_250900 16 18.10.2000, 8:21 Uhr CA-COM Cable connecting plug, Class E CA01COM-E-B with bayonet coupling CA01COM-E-B is a cable connecting plug with endbell and cable clamp. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin insert* CA01COM-E10SL-**-P*-B CA01COM-E-12S**-P*-B CA01COM-E14S-**-P*-B CA01COM-E16S-**-P*-B CA01COM-E16-**-P*-B CA01COM-E18-**-P*-B CA01COM-E20-**-P*-B CA01COM-E22**-P*-B CA01COM-E24-**-P*-B CA01COM-E28-**-P*-B CA01COM-E32-**-P*-B CA01COM-E36-**-P*-B A –0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 B1) C +0,4 18,2 18,2 18,2 18,2 21,5 23,05 23,05 23,05 23,05 24,05 24,05 24,05 7,9 7,9 11,1 14,2 14,2 15,8 19,0 19,0 23,7 23,7 31,8 34,6 D ± 0,2 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 E max 57 57 59 60 68 72 72 72 78 79 78 78 F max 25,2 27,8 29,8 32,3 32,3 34,8 37,8 41,1 44,6 50,9 57,1 63,6 G ± 0,2 20,6 23,8 25,4 28,6 28,6 31,7 34,9 38,1 41,3 47,6 54,0 60,6 CA01COM-E with threaded coupling CA01COM-E is a cable connecting plug with endbell and cable clamp. It mates with plugs CA06COM and CA08COM. Part No. Pin Insert* CA01COM-E10SL-**-P* CA01COM-E12S-**-P* CA01COM-E14S-**-P* CA01COM-E16S-**-P* CA01COM-E16-**-P* CA01COM-E18-**-P* CA01COM-E20-**-P* CA01COM-E22-**-P* CA01COM-E24-**-P* CA01COM-E28-**-P* CA01COM-E32-**-P* CA01COM-E36-**-P* A Thread 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 2-1/4-16UN-2A B1) 7,9 7,9 11,1 14,2 14,2 15,8 19,0 19,0 23,7 23,7 31,8 34,6 C +0,4 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 D ± 0,3 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 E max 53 53 55 56 66 68 68 68 76 76 76 76 F max 21,8 25,0 28,2 31,4 31,4 34,5 37,3 40,9 43,8 50,4 56,8 63,1 G max 16,2 19,4 22,5 25,7 25,7 28,9 32,1 35,2 38,4 44,8 51,1 57,5 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 1 ) max cable dia 17 #1171_CA-COM_englisch_250900 17 18.10.2000, 8:21 Uhr CA-COM Cable connecting plug, Class E CA01COM-E-B/-03/-06 with bayonet coupling CA01COM-E-B/-03/-06 is a cable connecting plug with endbell (wire sealing) for heat shrink boots. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin insert* CA01COM-E10SL-**-P*-BCA01COM-E12S-**-P*-BCA01COM-E14S-**-P*-BCA01COM-E16S-**-P*-BCA01COM-E16-**-P*-BCA01COM-E18-**-P*-BCA01COM-E20-**-P*-BCA01COM-E22-**-P*-BCA01COM-E24-**-P*-BCA01COM-E28-**-P*-BCA01COM-E32-**-P*-BCA01COM-E36-**-P*-B- A –0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 B +0,4 18,2 18,2 18,2 18,2 21,5 23,05 23,05 23,05 23,05 24,05 24,05 24,05 C ± 0,3 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 D 1) 7,7 7,9 10,6 13,5 13,5 14,6 18,7 20,8 24,6 27,0 33,3 38,5 E max 13,3 13,3 17,0 21,9 21,9 21,9 26,2 26,2 34,5 34,5 43,6 43,6 F ± 0,2 15,5 15,5 19,1 23,9 23,9 23,9 29,6 29,6 37,8 37,8 47,8 47,8 G ± 0,5 11,7 11,7 11,7 11,7 11,5 11,5 12,7 12,7 12,7 12,7 15,2 15,2 H max 53 53 53 53 61 62 64 64 64 66 69 70 I max 25,2 27,8 29,8 32,3 32,3 34,8 37,8 41,1 44,6 50,9 57,1 63,6 K ± 0,2 20,6 23,8 25,4 28,6 28,6 31,7 34,9 38,1 41,3 47,6 54,0 60,6 CA01COM-E-DN with threaded coupling CA01COM-E-DN is a cable connecting plug with endbell (wire sealing) for heat shrink boots. It mates with plugs CA06COM and CA08COM. Part No. Pin insert* CA01COM-E10SL-**-P*-DN CA01COM-E12S-**-P*-DN CA01COM-E14S-**-P*-DN CA01COM-E16S-**-P*-DN CA01COM-E16-**-P*-DN CA01COM-E18-**-P*-DN CA01COM-E20-**-P*-DN CA01COM-E22-**-P*-DN CA01COM-E24-**-P*-DN CA01COM-E28-**-P*-DN CA01COM-E32-**-P*-DN CA01COM-E36-**-P*-DN A Thread 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 2-1/4-16UN-2A B ± 0,3 14,2 14,2 14,2 14,1 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 C ± 0,3 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 D1) max 7,7 7,9 10,6 13,5 13,5 14,6 18,7 20,8 24,6 27,0 33,3 38,5 E ± 0,2 13,3 13,3 17,0 21,9 21,9 21,9 26,2 26,2 34,5 34,5 43,6 43,6 F ± 0,5 15,5 15,5 19,1 23,9 23,9 23,9 29,6 29,6 37,8 37,8 47,8 47,8 G max 11,7 11,7 11,7 11,7 11,5 11,5 12,7 12,7 12,7 12,7 15,2 15,2 H max 49 49 49 49 58 58 60 60 63 63 67 68 I max 21,8 25,0 28,2 31,4 31,4 34,5 37,7 40,9 43,8 50,4 56,8 63,1 K ± 0,2 16,2 19,4 22,5 25,7 25,7 28,9 32,1 35,2 38,4 44,8 51,1 57,5 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 1 ) max cable dia All dimensions are in mm Subject to changes 18 #1171_CA-COM_englisch_250900 18 18.10.2000, 8:21 Uhr CA-COM Cable connecting plug, Class F CA01COM-F-B with bayonet coupling CA01COM-F-B is a cable connecting plug for flex tube. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin Insert* CA01COM-F10SL-**-P*-B CA01COM-F12S-**-P*-B CA01COM-F14S-**-P*-B CA01COM-F16S-**-P*-B CA01COM-F16-**-P*-B CA01COM-F18-**-P*-B CA01COM-F20-**-P*-B CA01COM-F22-**-P*-B CA01COM-F24-**-P*-B CA01COM-F28-**-P*-B CA01COM-F32-**-P*-B CA01COM-F36-**-P*-B A –0,15 18,2 18,2 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 B1) 8,2 8,2 11,1 14,3 14,3 16,7 19,8 19,8 25,4 27,0 32,5 35,7 C Thread 5/8-24UNEF-2A 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-3/16-18UNEF-2A 1-3/16-18UNEF-2A 1-7/16-18UNEF 1-7/16-18UNEF 1-3/4-18UNS-2A 2-18UNS-2A D min 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 11,0 11,8 E +0,4 18,2 18,2 18,2 18,2 21,5 23,05 32,05 32,05 23,05 24,05 24,05 24,05 F ± 0,2 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 G max 50 50 50 50 57 59 59 62 62 64 64 66 H max 25,2 27,8 29,8 32,3 32,3 34,8 37,8 41,1 44,6 50,9 57,1 63,6 I ± 0,2 20,6 23,8 25,4 28,6 28,6 31,7 34,9 38,1 41,3 47,6 54,0 60,6 D min 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 11,0 11,8 E +0,4 14,2 14,2 14,2 14,2 14,2 19,0 19,0 20,6 20,6 20,6 22,2 22,2 F ± 0,3 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 G max 45 45 45 45 54 54 55 58 59 60 62 64 H max 21,8 25,0 28,2 31,4 31,4 34,5 37,7 40,9 43,8 50,4 56,8 63,1 I max 16,2 19,4 22,5 25,7 25,7 28,9 32,1 35,2 38,4 44,8 51,1 57,5 CA01COM-F with threaded coupling CA01COM-F is a cable connecting plug for flex tube. It mates with plugs CA06COM and CA08COM. Part No. Pin Insert* CA01COM-F10SL-**-P* CA01COM-F12S-**-P* CA01COM-F14S-**-P* CA01COM-F16S-**-P* CA01COM-F16-**-P* CA01COM-F18-**-P* CA01COM-F20-**-P* CA01COM-F22-**-P* CA01COM-F24-**-P* CA01COM-F28-**-P* CA01COM-F32-**-P* CA01COM-F36-**-P* A Thread 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 2-1/4-16UN-2A B1) 8,2 8,2 11,1 14,3 14,3 16,7 19,8 19,8 25,4 27,0 32,5 35,7 C Thread 5/8-24UNEF-2A 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-3/16-18UNEF-2A 1-3/16-18UNEF-2A 1-7/16-18UNEF-2A 1-7/16-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 1 ) max cable dia 19 #1171_CA-COM_englisch_250900 19 18.10.2000, 8:21 Uhr CA-COM Box mounting receptacle, Class E CA02COM-E-B with bayonet coupling CA02COM-E-B is a box mounting receptacle for front panel mounting. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin Insert* CA02COM-E10SL-**-P*-B CA02COM-E12S-**-P*-B CA02COM-E14S-**-P*-B CA02COM-E16S-**-P*-B CA02COM-E16-**-P*-B CA02COM-E18-**-P*-B CA02COM-E20-**-P*-B CA02COM-E22-**-P*-B CA02COM-E24-**-P*-B CA02COM-E28-**-P*-B CA02COM-E32-**-P*-B CA02COM-E36-**-P*-B A –0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 B +0,4 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 C ± 0,2 2,8 3,2 3,2 3,2 3,2 4,0 4.0 4,0 4,0 4,0 4,0 4,0 D ± 0,3 24,7 24,7 24,7 24,7 33,8 33,8 33,8 33,8 33,8 33,8 33,8 33,8 E max 16,2 16,2 19,2 22,4 22,4 25,6 29,0 32,2 35,3 41,4 47,8 52,6 F ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 G ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 H H13 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,7 3,7 4,3 4,3 X / Contact size 15 25 13,6 13,2 13,2 13,2 17,9 17,9 17,1 17,1 17,1 17,1 17,1 17,1 15,5 15,5 15,5 15,5 13,9 15,5 13,9 15,5 100 19,5 18,7 18,7 18,7 17,1 17,1 15,5 15,5 CA02COM-E with threaded coupling CA02COM-E is a box mounting receptacle for front panel mounting. It mates with plugs CA06COM and CA08COM. Part No. Pin Insert* CA02COM-E10SL-**-P* CA02COM-E12S-**-P* CA02COM-E14S-**-P* CA02COM-E16S-**-P* CA02COM-E16-**-P* CA02COM-E18-**-P* CA02COM-E20-**-P* CA02COM-E22-**-P* CA02COM-E24-**-P* CA02COM-E28-**-P* CA02COM-E32-**-P* CA02COM-E36-**-P* A Thread 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNEF-2A 2-18UNS-2A 2-1/4-16UN-2A B +0,4 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 C ± 0,3 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 D max 25,1 25,1 25,1 25,1 34,2 34,2 34,2 34,2 34,2 34,2 34,2 34,2 E max 15,9 15,9 19,0 22,2 22,2 25,4 29,0 32,2 35,3 41,2 47,6 52,4 F ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 G ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 H +0,2 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,7 3,7 4,4 4,4 X / Contact size 15 25 13,6 13,2 13,2 13,2 17,9 17,9 17,1 17,1 17,1 17,1 17,1 17,1 15,5 15,5 15,5 15,5 13,9 13,9 13,9 13,9 100 19,5 18,7 18,7 18,7 17,1 17,1 15,5 15,5 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) All dimensions are in mm Subject to changes 20 #1171_CA-COM_englisch_250900 20 18.10.2000, 8:21 Uhr CA-COM Box mounting receptacle, Class E CA20COM-E-B with bayonet coupling CA20COM-E-B is a box mounting receptacle for rear panel mounting. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin Insert* CA20COM-E10SL-**-P*-B CA20COM-E12S-**-P*-B CA20COM-E14S-**-P*-B CA20COM-E16S-**-P*-B CA20COM-E16-**-P*-B CA20COM-E18-**-P*-B CA20COM-E20-**-P*-B CA20COM-E22-**-P*-B CA20COM-E24-**-P*-B CA20COM-E28-**-P*-B CA20COM-E32-**-P*-B CA20COM-E36-**-P*-B A –0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 B +0,4 18,2 18,2 18,2 18,2 21,5 23,05 23,05 23,05 23,05 24,05 24,05 24,05 C ± 0,2 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 D ± 0,3 24,7 24,7 24,7 24,7 33,8 33,8 33,8 33,8 33,8 33,8 33,8 33,8 E max 16,2 16,2 19,2 22,4 22,4 25,6 29,0 32,2 35,3 41,4 47,8 54,1 F ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 G ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 H M4 M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 CA20COM-E with threaded coupling CA20COM-E is a box mounting receptacle for rear panel mounting. It mates with plugs CA06COM and CA08COM. Part No. Pin insert* A Thread B +0,4 C ± 0,3 D max E max F ± 0,1 G ± 0,3 CA20COM-E10SL-**-P* CA20COM-E12S-**-P* CA20COM-E14S-**-P* CA20COM-E16S-**-P* CA20COM-E16-**-P* CA20COM-E18-**-P* CA20COM-E20-**-P* CA20COM-E22-**-P* CA20COM-E24-**-P* CA20COM-E28-**-P* CA20COM-E32-**-P* CA20COM-E36-**-P* 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNEF-2A 2-18UNS-2A 2-1/4-16UN-2A 18,2 18,2 18,2 18,2 21,5 23,05 23,05 23,05 24,05 24,05 24,05 24,05 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 25,1 25,1 25,1 25,1 34,2 34,2 34,2 34,2 34,2 34,2 34,2 34,2 14,5 16,1 19,2 22,4 22,4 25,6 29,0 32,2 35,3 41,4 47,8 54,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 H H13 Std 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,7 3,7 4,4 4,4 BM29 M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M6 M6 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 21 #1171_CA-COM_englisch_250900 21 18.10.2000, 8:22 Uhr CA-COM Box mounting receptacle, Class L, with pcb termination CA02COM-L-B with bayonet coupling CA02COM-L-B is a box mounting receptacle for front panel mounting. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin Insert* CA02COM-L10SL-**-P*-B CA02COM-L12S-**-P*-B CA02COM-L14S-**-P*-B CA02COM-L16S-**-P*-B CA02COM-L16-**-P*-B CA02COM-L18-**-P*-B CA02COM-L20-**-P*-B CA02COM-L22-**-P*-B CA02COM-L24-**-P*-B CA02COM-L28-**-P*-B CA02COM-L32-**-P*-B CA02COM-L36-**-P*-B A –0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 B +0,4 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 C ± 0,2 2,8 3,2 3,2 3,2 3,2 4,0 4.0 4,0 4,0 4,0 4,0 4,0 D ± 0,3 24,7 24,7 24,7 24,7 33,8 33,8 33,8 33,8 33,8 33,8 33,8 33,8 E max 16,2 16,2 19,2 22,4 22,4 25,6 29,0 32,2 35,3 41,4 47,8 52,6 F ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 G ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 H H13 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,7 3,7 4,3 4,3 CA02COM-L with threaded coupling CA02COM-L is a box mounting receptacle for front panel mounting. It mates with plugs CA06COM and CA08COM. Part No. Pin Insert* CA02COM-L10SL-**-P* CA02COM-L12S-**-P* CA02COM-L14S-**-P* CA02COM-L16S-**-P* CA02COM-L16-**-P* CA02COM-L18-**-P* CA02COM-L20-**-P* CA02COM-L22-**-P* CA02COM-L24-**-P* CA02COM-L28-**-P* CA02COM-L32-**-P* CA02COM-L36-**-P* A Thread 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNEF-2A 2-18UNS-2A 2-1/4-16UN-2A B +0,4 14,2 14,2 14,2 14,2 19,0 19,0 19,0 19,0 20,6 20,6 22,2 22,2 C ± 0,3 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 D max 25,1 25,1 25,1 25,1 34,2 34,2 34,2 34,2 34,2 34,2 34,2 34,2 E max 15,9 15,9 19,0 22,2 22,2 25,4 29,0 32,2 35,3 41,2 47,6 52,4 F ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 G ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 H +0,2/–0,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,1 3,7 3,7 4,4 4,4 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) All dimensions are in mm Subject to changes 22 #1171_CA-COM_englisch_250900 22 18.10.2000, 8:22 Uhr CA-COM Box mounting receptacle, Class L, with pcb termination CA20COM-L-B with bayonet coupling CA20COM-L-B is a box mounting receptacle for rear panel mounting. It mates with plugs CA06COM-B and CA08COM-B. Part No. Pin Insert* CA20COM-L10SL-**-P*-B CA20COM-L12S-**-P*-B CA20COM-L14S-**-P*-B CA20COM-L16S-**-P*-B CA20COM-L16-**-P*-B CA20COM-L18-**-P*-B CA20COM-L20-**-P*-B CA20COM-L22-**-P*-B CA20COM-L24-**-P*-B CA20COM-L28-**-P*-B CA20COM-L32-**-P*-B CA20COM-L36-**-P*-B A –0,15 18,2 21,4 24,6 27,4 27,4 30,8 34,2 37,4 40,9 46,7 53,4 59,6 B +0,4 18,2 18,2 18,2 18,2 21,5 23,05 23,05 23,05 23,05 24,05 24,05 24,05 C ± 0,2 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 D ± 0,3 24,7 24,7 24,7 24,7 33,8 33,8 33,8 33,8 33,8 33,8 33,8 33,8 E max 16,2 16,2 19,2 22,4 22,4 25,6 29,0 32,2 35,3 41,4 47,8 54,1 F ± 0,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 G ± 0,3 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 H M4 M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M5 CA20COM-L with threaded coupling CA20COM-L is a box mounting receptacle for rear panel mounting. It mates with plugs CA06COM and CA08COM. Part No. Pin insert* A Thread B +0,4 C ± 0,3 D max E max F ± 0,1 G ± 0,3 CA20COM-L10SL-**-P* CA20COM-L12S-**-P* CA20COM-L14S-**-P* CA20COM-L16S-**-P* CA20COM-L16-**-P* CA20COM-L18-**-P* CA20COM-L20-**-P* CA20COM-L22-**-P* CA20COM-L24-**-P* CA20COM-L28-**-P* CA20COM-L32-**-P* CA20COM-L36-**-P* 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNEF-2A 2-18UNS-2A 2-1/4-16UN-2A 18,2 18,2 18,2 18,2 21,5 23,05 23,05 23,05 24,05 24,05 24,05 24,05 2,8 3,2 3,2 3,2 3,2 4,0 4,0 4,0 4,0 4,0 4,0 4,0 25,1 25,1 25,1 25,1 34,2 34,2 34,2 34,2 34,2 34,2 34,2 34,2 14,5 16,1 19,2 22,4 22,4 25,6 29,0 32,2 35,3 41,4 47,8 54,1 18,2 20,6 23,0 24,6 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 25,4 28,0 30,0 32,5 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 H H13 Std 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,2 3,7 3,7 4,4 4,4 BM29 M4 M4 M4 M4 M4 M4 M4 M4 M5 M5 M6 M6 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 23 #1171_CA-COM_englisch_250900 23 18.10.2000, 8:22 Uhr CA-COM Straight plug, Class PG CA06COM-PG-B with bayonet coupling CA06COM-PG-B is a straight plug for usage of PG terminations. It mates with receptacles CA00COM-B, CA01COM-B and CA02COM-E-B. Part No. Pin Insert* CA06COM-PG10SL-**-P*-B CA06COM-PG12S-**-P*-B CA06COM-PG14S-**-P*-B CA06COM-PG16S-**-P*-B CA06COM-PG16-**-P*-B CA06COM-PG18-**-P*-B CA06COM-PG20-**-P*-B CA06COM-PG22-**-P*-B CA06COM-PG24-**-P*-B CA06COM-PG28-**-P*-B CA06COM-PG32-**-P*-B CA06COM-PG36-**-P*-B A max 22,8 26,0 29,2 32,0 32,0 36,5 39,9 43,1 46,6 53,4 60,1 66,3 B Thread PG9 PG9 PG11 PG13,5 PG13,5 PG13,5 PG16 PG16 PG16 PG21 PG29 PG29 C max 18 19 22 24 24 25 27 27 27 32 41 41 D max 52 52 52 54 64 69 70 73 74 74 76 87 CA06COM-PG with threaded coupling CA06COM-PG is a straight plug for usage of PG terminations. It mates with receptacles CA00COM, CA01COM and CA02COM-E. Part No. Pin Insert* CA06COM-PG10SL-**-P* CA06COM-PG12S-**-P* CA06COM-PG14S-**-P* CA06COM-PG16S-**-P* CA06COM-PG16-**-P* CA06COM-PG18-**-P* CA06COM-PG20-**-P* CA06COM-PG22-**-P* CA06COM-PG24-**-P* CA06COM-PG28-**-P* CA06COM-PG32-**-P* CA06COM-PG36-**-P* A max 24,1 25,8 28,8 31,8 31,8 34,1 37,4 40,5 43,8 50,2 56,4 62,8 B Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B 2-1/4-16UN-2B C Thread PG9 PG9 PG11 PG13,5 PG13,5 PG13,5 PG16 PG16 PG16 PG21 PG29 PG29 D max 18 19 22 24 24 25 27 27 27 32 41 41 E max 52 52 52 54 64 69 70 73 74 74 76 87 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) All dimensions are in mm Subject to changes 24 #1171_CA-COM_englisch_250900 24 18.10.2000, 8:22 Uhr CA-COM Straight plug, Class E CA06COM-E-B with bayonet coupling CA06COM-E-B is a straight plug with endbell and cable clamp. It mates with receptacles CA00COM-B, CA01COM-B and CA02COM-E-B. Part No. Pin Insert* CA06COM-E10SL-**-P*-B CA06COM-E12S-**-P*-B CA06COM-E14S-**-P*-B CA06COM-E16S-**-P*-B CA06COM-E16-**-P*-B CA06COM-E18-**-P*-B CA06COM-E20-**-P*-B CA06COM-E22-**-P*-B CA06COM-E24-**-P*-B CA06COM-E28-**-P*-B CA06COM-E32-**-P*-B CA06COM-E36-**-P*-B B1) A max 22,8 26,0 29,2 32,0 32,0 36,5 39,9 43,1 46,6 53,4 60,1 66,3 C max 53 53 55 56 66 68 68 68 76 76 76 76 7,9 7,9 11,1 14,2 14,2 15,8 19,0 19,0 23,7 23,7 31,8 34,6 CA06COM-E with threaded coupling CA06COM-E is a straight plug with endbell and cable clamp. It mates with receptacles CA00COM, CA01COM and CA02COM-E. Part No. Pin insert* CA06COM-E10SL-**-P* CA06COM-E12S-**-P* CA06COM-E14S-**-P* CA06COM-E16S-**-P* CA06COM-E16-**-P* CA06COM-E18-**-P* CA06COM-E20-**-P* CA06COM-E22-**-P* CA06COM-E24-**-P* CA06COM-E28-**-P* CA06COM-E32-**-P* CA06COM-E36-**-P* A max 24,1 25,8 28,8 31,8 31,8 34,1 37,4 40,5 43,8 50,2 56,4 62,8 B Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B 2-1/4-16UN-2B C 1) 7,9 7,9 11,1 14,2 14,2 15,8 19,0 19,0 23,7 23,7 31,8 34,6 D max 53 53 55 56 66 68 68 68 76 76 76 76 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 1 ) max cable dia 25 #1171_CA-COM_englisch_250900 25 18.10.2000, 8:22 Uhr CA-COM Straight plug, Class F CA06COM-F-B with bayonet coupling CA06COM-F-B is a straight plug with endbell for flex tubes. It mates with receptacles CA00COM-B, CA01COM-B and CA02COM-E-B. Part No. Pin Insert* CA06COM-F10SL-**-P*-B CA06COM-F12S-**-P*-B CA06COM-F14S-**-P*-B CA06COM-F16S-**-P*-B CA06COM-F16-**-P*-B CA06COM-F18-**-P*-B CA06COM-F20-**-P*-B CA06COM-F22-**-P*-B CA06COM-F24-**-P*-B CA06COM-F28-**-P*-B CA06COM-F32-**-P*-B CA06COM-F36-**-P*-B B1) A max 22,8 26,0 29,2 32,0 32,0 36,5 39,9 43,1 46,6 53,4 60,1 66,3 C Thread 5/8-24UNEF-2A 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-3/16-18UNEF-2A 1-3/16-18UNEF-2A 1-7/16-18UNEF-2A 1-7/16-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A 8,2 8,2 11,1 14,3 14,3 16,7 19,8 19,8 25,4 27,0 32,5 35,7 D min 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 11,0 11,8 E max 45 45 45 45 54 54 55 58 59 60 62 64 CA06COM-F with threaded coupling CA06COM-F is a straight plug with endbell for flex tubes. It mates with receptacles CA00COM, CA01COM and CA02COM-E. Part No. Pin Insert* CA06COM-F10SL-**-P* CA06COM-F12S-**-P* CA06COM-F14S-**-P* CA06COM-F16S-**-P* CA06COM-F16-**-P* CA06COM-F18-**-P* CA06COM-F20-**-P* CA06COM-F22-**-P* CA06COM-F24-**-P* CA06COM-F28-**-P* CA06COM-F32-**-P* CA06COM-F36-**-P* A max 24,1 25,8 28,8 31,8 31,8 34,1 37,4 40,5 43,8 50,2 56,4 62,8 B Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B 2-1/4-16UN-2B C1) 8,2 8,2 11,1 14,3 14,3 16,7 19,8 19,8 25,4 27,0 32,5 35,7 D Thread 5/8-24UNEF-2A 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF 7/8-20UNEF 1-20UNEF-2A 1-3/16-18UNEF-2A 1-3/16-18UNEF-2A 1-7/16-18UNEF-2A 1-7/16-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A E min 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 9,5 11,0 11,8 F max 45 45 45 45 54 54 55 58 59 60 62 64 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 1 ) max cable dia All dimensions are in mm Subject to changes 26 #1171_CA-COM_englisch_250900 26 18.10.2000, 8:22 Uhr CA-COM Straight plug, Class E CA06COM-E-B/-03/-06 with bayonet coupling CA06COM-E-B/-03/-06 is a straight plug with endbell (wire sealing) for heat shrink boots. It mates with receptacles CA00COM-B, CA01COM-B and CA02COM-E-B. Part No. Pin Insert* CA06COM-E10SL-**-P*-BCA06COM-E12S-**-P*-BCA06COM-E14S-**-P*-BCA06COM-E16S-**-P*-BCA06COM-E16-**-P*-BCA06COM-E18-**-P*-BCA06COM-E20-**-P*-BCA06COM-E22-**-P*-BCA06COM-E24-**-P*-BCA06COM-E28-**-P*-BCA06COM-E32-**-P*-BCA06COM-E36-**-P*-B- B1) A max 22,8 26,0 29,2 32,0 32,0 36,5 39,9 43,1 46,6 53,4 60,1 66,3 C max 13,3 13,3 17,0 21,9 21,9 21,9 26,2 26,2 34,5 34,5 43,6 43,6 7,7 7,9 10,6 13,5 13,5 14,6 18,7 20,8 24,6 27,0 33,3 38,5 D ± 0,2 15,5 15,5 19,1 23,9 23,9 23,9 29,6 29,6 37,8 37,8 47,8 47,8 E ± 0,5 11,7 11,7 11,7 11,7 11,5 11,5 12,7 12,7 12,7 12,7 15,2 15,2 F max 49 49 49 49 58 58 60 60 63 63 67 68 CA06COM-E-DN with threaded coupling CA06COM-E-DN is a straight plug with endbell (wire sealing) for heat shrink boots. It mates with receptacles CA00COM, CA01COM and CA02COM-E. Part No. Pin Insert* CA06COM-E10SL-**-P*-DN CA06COM-E12S-**-P*-DN CA06COM-E14S-**-P*-DN CA06COM-E16S-**-P*-DN CA06COM-E16-**-P*-DN CA06COM-E18-**-P*-DN CA06COM-E20-**-P*-DN CA06COM-E22-**-P*-DN CA06COM-E24-**-P*-DN CA06COM-E28-**-P*-DN CA06COM-E32-**-P*-DN CA06COM-E36-**-P*-DN A max 24,1 25,8 28,8 31,8 31,8 34,1 37,4 40,5 43,8 50,2 56,4 62,8 B Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B 2-1/4-16UN-2B C1) 7,7 7,9 10,6 13,5 13,5 14,6 18,7 20,8 24,6 27,0 33,3 38,5 D max 13,3 13,3 17,0 21,9 21,9 21,9 26,2 26,2 34,5 34,5 43,6 43,6 E ± 0,2 15,5 15,5 19,1 23,9 23,9 23,9 29,6 29,6 37,8 37,8 47,8 47,8 F ± 0,5 11,7 11,7 11,7 11,7 11,5 11,5 12,7 12,7 12,7 12,7 15,2 15,2 G max 49 49 49 49 58 58 60 60 63 63 67 68 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 1 ) max cable dia 27 #1171_CA-COM_englisch_250900 27 18.10.2000, 8:22 Uhr CA-COM Staright plug, Class IN CA06COM-IN-B with bayonet coupling CA06COM-IN-B is a straight plug with universal endbell. It mates with receptacles CA00COM-B, CA01COM-B and CA02COM-E-B. Part No. Pin Insert* CA06COM-IN10SL-**-P*-B CA06COM-IN14S-**-P*-B CA06COM-IN20-**-P*-B CA06COM-IN22-**-P*-B A 24,1 28,8 37,4 40,5 B max 84 85 92 96 E max 18 18 24 34 D Cable sealing area D07 = 4,5 – 7,2 mm D07 = 4,5 – 7,2 mm D11 = 7,0 – 11,2 mm D17 = 14,5 – 17,5 mm E max 18 18 24 34 D Cable sealing area D07 = 4,5 – 7,2 mm D07 = 4,5 – 7,2 mm D11 = 7,0 – 11,2 mm D17 = 14,5 – 17,5 mm CA06COM-IN with threaded coupling CA06COM-IN is a straight plug with universal endbell. It mates with receptacles CA00COM, CA01COM and CA02COM-E. Part No. Pin Insert* CA06COM-IN10SL-**-P* CA06COM-IN14S-**-P* CA06COM-IN20-**-P* CA06COM-IN22-**-P* A 24,1 28,8 37,4 40,5 B max 84 85 92 96 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) All dimensions are in mm Subject to changes 28 #1171_CA-COM_englisch_250900 28 18.10.2000, 8:22 Uhr CA-COM 90° Plug, Class E CA08COM-E-B with bayonet coupling CA08COM-E-B is a 90° plug with cable clamp. It mates with receptacles CA00COM-B, CA01COM-B and CA02COM-E-B. Part No. Pin Insert* CA08COM-E10SL-**-P*-B CA08COM-E12S-**-P*-B CA08COM-E14S-**-P*-B CA08COM-E16S-**-P*-B CA08COM-E16-**-P*-B CA08COM-E18-**-P*-B CA08COM-E20-**-P*-B CA08COM-E22-**-P*-B CA08COM-E24-**-P*-B CA08COM-E28-**-P*-B CA08COM-E32-**-P*-B CA08COM-E36-**-P*-B B1) A max 22,8 26,0 29,2 32,0 32,0 36,5 39,9 43,1 46,6 53,4 60,1 66,3 C max 22,7 22,7 27,5 30,0 30,0 33,0 37,5 37,5 43,3 43,3 51,7 58,0 7,9 7,9 11,1 14,2 14,2 15,8 19,0 19,0 23,7 23,7 31,8 34,6 D max 42 42 42 45 45 53 53 53 58 58 66 69 E max 45 45 47 48 48 58 61 61 66 66 72 75 CA08COM-E with threaded coupling CA08COM-E is a 90° plug with cable clamp. It mates with receptacles CA00COM, CA01COM and CA02COM-E. Part No. Pin Insert* CA08COM-E10SL-**-P* CA08COM-E12S-**-P* CA08COM-E14S-**-P* CA08COM-E16S-**-P* CA08COM-E16-**-P* CA08COM-E18-**-P* CA08COM-E20-**-P* CA08COM-E22-**-P* CA08COM-E24-**-P* CA08COM-E28-**-P* CA08COM-E32-**-P* CA08COM-E36-**-P* A max 24,1 25,8 28,8 31,8 31,8 34,1 37,4 40,5 43,8 50,2 56,4 62,8 B Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF 1-20UNEF 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B 2-1/4-16UN-2B C1) 7,9 7,9 11,1 14,2 14,2 15,8 19,0 19,0 23,7 23,7 31,8 34,6 D max 22,7 22,7 27,5 30,0 30,0 32,2 37,5 37,5 43,3 43,3 51,7 58,0 E max 42 42 42 45 45 53 53 53 58 58 66 69 F max 45 45 47 48 57 58 61 61 66 66 72 75 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 1 ) max cable dia 29 #1171_CA-COM_englisch_250900 29 18.10.2000, 8:22 Uhr CA-COM 90° Plug, Class F CA08COM-F-B with bayonet coupling CA08COM-F-B is a 90° plug for flex tubes. It mates with receptacles CA00COM-B, CA01COM-B and CA02COM-E-B. Part No. Pin Insert* CA08COM-F10SL-**-P*-B CA08COM-F12S-**-P*-B CA08COM-F14S-**-P*-B CA08COM-F16S-**-P*-B CA08COM-F16-**-P*-B CA08COM-F18-**-P*-B CA08COM-F20-**-P*-B CA08COM-F22-**-P*-B CA08COM-F24-**-P*-B CA08COM-F28-**-P*-B CA08COM-F32-**-P*-B CA08COM-F36-**-P*-B A max 22,8 26,0 29,2 32,0 32,0 36,5 39,9 43,1 46,6 53,4 60,1 66,3 B Thread 5/8-24UNEF-2A 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-3/16-18UNEF-2A 1-3/16-18UNEF-2A 1-7/16-18UNEF-2A 1-7/16-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A C max 45 45 47 48 57 58 61 61 66 66 72 75 D max 22,0 22,0 24,0 25,0 25,0 27,0 29,0 30,0 32,0 34,0 39,5 45,0 E min 9,4 9,4 9,4 9,4 9,4 9,4 9,4 9,4 9,4 9,4 11,0 12,6 CA08COM-F with threaded coupling CA08COM-F is a 90° plug for flex tubes. It mates with receptacles CA00COM, CA01COM and CA02COM-E. Part No. Pin Insert* CA08COM-F10SL-**-P* CA08COM-F12SL-**-P* CA08COM-F14S-**-P* CA08COM-F16S-**-P* CA08COM-F16-**-P* CA08COM-F18-**-P* CA08COM-F20-**-P* CA08COM-F22-**-P* CA08COM-F24-**-P* CA08COM-F28-**-P* CA08COM-F32-**-P* CA08COM-F36-**-P* A max 24,1 25,8 28,8 31,8 31,8 34,1 37,4 40,5 43,8 50,2 56,4 62,8 B Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B 2-1/4-16UN-2B C Thread 5/8-24UNEF-2A 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-3/16-18UNEF-2A 1-3/16-18UNEF-2A 1-7/16-18UNEF-2A 1-7/16-18UNEF-2A 1-3/4-18UNS-2A 2-18UNS-2A D max 45 45 47 48 57 58 61 61 66 66 72 75 E max 22,0 22,0 24,0 25,0 25,0 27,0 29,0 30,0 32,0 34,0 39,5 45,0 F min 9,4 9,4 9,4 9,4 9,4 9,4 9,4 9,4 9,4 9,4 11,0 12,6 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) All dimensions are in mm Subject to changes 30 #1171_CA-COM_englisch_250900 30 18.10.2000, 8:22 Uhr CA-COM 90° Plug, Class PG CA08COM-PG-B with bayonet coupling CA08COM-PG-B designates a 90° plug for usage of PG terminations. It mates with receptacles CA01COM-B and CA02COM-B. Part No. Pin insert* CA08COM-PG10SL-**P*-B CA08COM-PG12S-**P*-B CA08COM-PG14S-**P*-B CA08COM-PG16S-**P*-B CA08COM-PG16-**P*-B CA08COM-PG18-**P*-B CA08COM-PG20-**P*-B CA08COM-PG22-**P*-B A max 22,8 26,0 29,2 32,0 32,0 36,5 39,9 43,1 B –0,3 11,3 14,0 17,1 20,4 20,4 23,6 26,7 29,8 C max 57 57 59 63 72 77 82 82 D E 18,5 18,5 19,5 22,0 22,0 26,3 29,0 29,5 PG9 PG9 PG11 PG13,5 PG13,5 PG16 PG21 PG21 CA08COM-PG with threaded coupling CA08COM-PG designates a 90° plug for usage of PG terminations. It mates with receptacles CA01COM and CA02COM. Part No. Pin insert* CA08COM-PG10SL-**P* CA08COM-PG12S-**P* CA08COM-PG14S-**P* CA08COM-PG16S-**P* CA08COM-PG16-**P* CA08COM-PG18-**P* CA08COM-PG20-**P* CA08COM-PG22-**P* A max 24,1 25,8 28,8 31,8 31,8 34,1 37,4 40,5 B Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B C max 57 57 59 63 72 77 82 82 D E 18,5 18,5 19,5 22,0 22,0 26,3 29,0 29,5 PG9 PG9 PG11 PG13,5 PG13,5 PG16 PG21 PG21 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) 31 #1171_CA-COM_englisch_250900 31 18.10.2000, 8:23 Uhr CA-COM 90° Plug, Class IN CA08COM-IN-B with bayonet coupling CA08COM-IN-B is a 90° plug with universal endbell. It mates with receptacles CA00COM-B, CA01COM-B and CA02COM-E-B. Part No. Pin Insert* CA08COM-IN10SL-**P*-B-***-D07 CA08COM-IN20-**P*-B-***-D11 A 24,1 37,4 B max 52 62 C max 78 86 D Cable sealing area D07 = 4,5 – 7,2 mm D11 = 7,0 – 11,2 E max 18 24 C max 78 86 D Cable sealing area D07 = 4,5 – 7,2 mm D11 = 7,0 – 11,2 E max 18 24 CA08COM-IN with threaded coupling CA08COM-IN is a 90° plug with universal endbell. It mates with receptacles CA00COM, CA01COM and CA02COM-E. Part No. Pin Insert* CA08COM-IN10SL-**P*-***-D07 CA08COM-IN20-**P*-***-D11 A 24,1 37,4 B max 52 62 * For socket inserts substitute “S” for “P” ** Add contact arrangement number (see pages 6 – 8) *** 01 Crimp contact All dimensions are in mm Subject to changes 32 #1171_CA-COM_englisch_250900 32 18.10.2000, 8:23 Uhr CA-COM Accessories Protective caps for receptacles with bayonet coupling CA00COM-B, CA02COM-E-B and CA20COM-E-B Part No. Shell size CA120003-1701 CA120003-1702 CA120003-1703 CA121003-1704 CA121003-1705 CA121003-1706 CA121003-1707 CA121003-1708 CA121003-1709 CA121003-1710 CA121003-1711 CA121003-1712 10 SL 12S 14S 16S 16 18 20 22 24 28 32 36 B ± 0,3 19,5 19,5 19,5 19,5 24.5 24,5 24,5 24,5 24,5 24,5 24,5 24,5 D max 22,4 25,6 28,8 31,6 31,6 35,7 39,1 42,3 45,8 51,6 58,3 64,5 L ± 0,25 107 107 107 107 120 120 134 134 134 176 176 176 T +0,25 4,3 4,3 4,3 4,3 4,3 4,3 4,3 4,3 4,3 5,5 5,5 5,5 Protective caps for receptacles with threaded coupling CA00COM, CA02COM-E and CA20COM Part No. Shell size CA121003-1601 CA121003-1602 CA121003-1603 CA121003-1604 CA121003-1606 CA121003-1607 CA121003-1608 CA121003-1609 CA121003-1610 CA121003-1611 CA121003-1612 10SL 12S 14S 16S, 16 18 20 22 24 28 32 36 A Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-1/8-18UNEF-2B 1-1/4-18UNEF-2B 1-3/8-18UNEF-2B 1-1/2-18UNEF-2B 1-3/4-18UNEF-2B 2-18UNS-2B 2-1/4-16UN-2B B max 16,0 16,0 16,0 16,0 16,0 16,0 16,0 16,0 18,0 18,0 18,0 D max 20,2 23,4 26,6 29,8 32,9 36,1 39,4 42,6 48,9 55,3 61,6 L max 114 127 127 127 127 141 141 154 214 214 214 T +0,2 3,6 3,6 3,6 3,6 3,6 3,6 3,6 4,4 4,4 4,8 4,8 33 #1171_CA-COM_englisch_250900 33 18.10.2000, 8:23 Uhr CA-COM Accessories Protective caps for plugs with bayonet coupling CA06COM-B and CA08COM-B Part No. Shell size CA121004-1701 CA121004-1702 CA121004-1703 CA121004-1704 CA121004-1705 CA121004-1706 CA121004-1707 CA121004-1708 CA121004-1709 CA121004-1710 CA121004-1711 CA121004-1712 10 SL 12S 14S 16S 16 18 20 22 24 28 32 36 B max 29,0 29,0 29,0 29,0 37,0 37,0 37,0 37,0 37,0 37,0 37,0 37,0 D max 20,7 23,9 27,1 29,9 29,9 33,3 36,7 39,9 43,4 49,2 55,9 62,1 L ca 107 120 120 120 134 134 147 147 147 204 204 204 T +0,5 4,3 4,3 4,3 4,3 4,3 4,3 4,7 4,7 4,7 4,7 5,5 5,5 Protective caps for plugs with threaded coupling CA06COM and CA08COM Part No. Shell size CA121004-1601 CA121004-1602 CA121004-1603 CA121004-1604 CA121004-1606 CA121004-1607 CA121004-1608 CA121004-1609 CA121004-1610 CA121004-1611 CA121004-1612 10SL 12S 14S 16S, 16 18 20 22 24 28 32 36 A Thread 5/8-24UNEF-2A 3/4-20UNEF-2A 7/8-20UNEF-2A 1-20UNEF-2A 1-1/8-18UNEF-2A 1-1/4-18UNEF-2A 1-3/8-18UNEF-2A 1-1/2-18UNEF-2A 1-3/4-18UNEF-2A 2-18UNS-2A 2-1/4-16UN-2A B max 20,5 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 25,0 D max 16,7 19,8 23,0 26,2 29,4 32,5 35,7 38,9 45,2 51,6 57,9 L max 114 127 127 127 127 141 141 154 214 214 214 All dimensions are in mm Subject to changes 34 #1171_CA-COM_englisch_250900 T +0,4 4,0 4,0 4,0 4,0 4,0 4,8 4,8 4,8 4,8 5,6 5,6 34 18.10.2000, 8:23 Uhr CA-COM Accessories Cable clamp without bushing Part No. Shell size CA121051-325 CA121051-326 CA121051-327 CA121051-328 CA121051-329 CA121051-330 CA121051-331 CA121051-332 10SL, 12S 14S 16S, 16 18 20, 22 24, 28 32 36 A Thread 5/8-24UNEF-2B 3/4-20UNEF-2B 7/8-20UNEF-2B 1-20UNEF-2B 1-3/16-18UNEF-2B 1-7/16-18UNEF-2B 1-3/4-18UNS-2B 2-18UNS-2B B max 10,5 10,6 10,5 10,5 10,5 10,5 12,0 13,7 E max 7,9 11,1 14,2 15,8 19,0 23,7 31,8 34,6 L max 20,8 22,4 24,0 24,0 24,0 26,4 28,0 29,6 R max 22,6 27,4 29,8 32,2 37,4 43,5 51,7 57,8 Shell weight g 13,2 18,0 23,6 27,3 37,2 56,3 83,9 109,8 Telescoping bushing The telescoping bushing is used together with above cable clamps CA121051-... It keeps oil, dirt or dust out of the endbell. Wrapping or insulating of the wires fed through the clamp is eliminated since they are protected by the bushing. Combinations of bushings may be used to reduce cable entry diameters for improved sealing. Material: Polychloroprene Part No. Shell size 012-8552-000 012-8554-000 012-0218-000 012-0219-000 012-0220-000 012-8555-000 012-8556-000 012-8557-000 012-8558-000 012-8558-000 012-0223-000 10SL,12S 14S 16S, 16 18 20, 22 24, 28 24, 28 32 32 36 36 C max 10,0 12,8 18,9 22,1 27,0 27,0 33,5 33,5 40,5 40,5 47,0 L max 70,4 67,4 63,9 60,6 57,4 57,4 54,4 54,4 51,4 51,4 48,4 R –0,3 6,7 9,2 11,2 14,4 16,0 16,7 21,6 21,6 26,9 26,9 31,9 S –0,3 8,1 11,0 14,2 15,8 18,9 21,3 23,7 26,6 31,6 31,6 34,8 35 #1171_CA-COM_englisch_250900 35 18.10.2000, 8:23 Uhr CA-COM Gaskets for CA00COM-B for CA02COM/CA02COM-B/CA00COM These sealing gaskets made of neoprene are used with receptacles with flange for sealing between the shell and the flange of the receptacle. Rear panel mounting Part No. Shell size 075-8501-000 075-8502-000 075-8503-000 075-8504-000 075-8505-000 075-8506-000 075-8507-000 075-8508-000 075-8509-000 075-8510-000 075-8511-000 10SL 12S 14S 16S, 16 18 20 22 24 28 32 36 A ± 0,1 18,2 20,6 23,0 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 B +0,2 18,2 21,4 24,6 27,4 30,8 34,2 37,4 40,8 46,7 53,4 59,6 C ± 0,3 25,4 28,0 30,0 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 D +0,2 4,2 4,2 4,2 4,2 4,2 4,2 4,2 4,2 5,2 5,2 5,2 A ± 0,1 15,7 20,6 23,0 24,6 27,0 29,4 31,8 34,9 39,7 44,5 49,2 B +0,2 18,2 18,9 22,1 25,3 28,4 31,6 34,8 38,0 44,3 50,7 57,0 C ± 0,3 25,4 28,0 30,0 32,5 35,0 38,0 41,0 44,5 50,8 57,0 63,5 D +0,2 4,2 4,2 4,2 4,2 4,2 4,2 4,2 4,2 5,2 5,2 5,2 Front panel mounting Part No. Shell size 075-8512-000 075-8513-000 075-8514-000 075-8515-000 075-8516-000 075-8517-000 075-8518-000 075-8519-000 075-8520-000 075-8521-000 075-8522-000 10SL 12S 14S 16S, 16 18 20 22 24 28 32 36 All dimensions are in mm Subject to changes 36 #1171_CA-COM_englisch_250900 36 18.10.2000, 8:23 Uhr CA-COM Contacts Standard contacts and contacts with reduced termination size Size 25 Finish: A36 - 5 µm silver plated (Standard) Size 15S Socket contacts Contact size Termination size mm2 15S 0,75 - 1,5 0,3 - 0,6 0,14 - 0,38 0,75 - 1,5 0,3 - 0,6 0,14 - 0,38 2,0 - 3,0 0,75 - 1, 5 4,0 0,3 - 0,6 6,0 10,0 2,0 - 3,0 4,0 15 25 100 Part number with finish A36 031-8555-110 031-8688-110 031-8555-130 031-8556-110 031-8639-120 031-8556-130 031-8557-000 031-8557-020 031-8557-010 031-8557-040 031-8558-000 031-8559-000 031-8519-010 031-8519-000 Size 100 d1 d2 +0,05 d3 d5 d6 l1 ± 0,2 l2 ± 0,1 3,2-0,15 3,2-0,15 3,2-0,15 3,2-0,15 3,2-0,15 3,2-0,15 4,8-0,1 4,8-0,1 4,8-0,1 4,8-0,1 6,5-0,2 6,5-0,2 6,5-0,2 6,5-0,2 1,65 1,65 1,65 1,65 1,65 1,65 2,45 2,45 2,45 2,45 3,65 3,65 3,65 3,65 1,75-0,1 1,75-0,1 1,75-0,1 1,75-0,1 1,75-0,1 1,75-0,1 3,3-0,1 3,3-0,1 3,3-0,1 3,3-0,1 6,25-0,2 6,25-0,2 6,25-0,2 6,25-0,2 1,75+0,08 1,2+0,1 0,9+0,05 1,75+0,08 1,2+0,1 0,9+0,05 2,5+0,1 1,75+0,08 2,8+0,1 1,2+0,1 3,5+0,1 4,8+0,1 2,5+0,05 4,55+0,1 2,75-0,05 2,75-0,05 2,75-0,05 2,75-0,05 2,75-0,05 2,75-0,05 3,8-0,1 3,8-0,1 3,8-0,1 3,8-0,1 6,8-0,1 6,8-0,1 6,8-0,1 6,8-0,1 29,1 29,1 29,1 37,8 37,8 37,8 37,0 37,0 37,0 37,0 40,1 40,1 40,1 40,1 3,9 3,9 3,9 7,9 7,9 7,9 7,9 7,9 7,9 7,9 6,35 6,35 6,35 6,35 Pin Contacts Contact size Termination size mm2 15S 0,75 - 1,5 0,3 - 0,6 0,14 - 0,38 0,75 - 1,5 0,3 - 0,6 0,14 - 0,38 2,0 - 3,0 0,75 - 1, 5 4,0 6,0 10,0 2,0 - 3,0 4,0 15 25 100 Part number with finish A36 030-8586-000 330-8744-000 030-8586-010 030-8587-000 330-8659-000 030-8587-030 030-8588-000 030-8588-010 030-8588-054 030-8589-000 030-8590-000 030-8612-010 030-8612-020 d1 –0,05 d4 d6 d7 l1 ± 0,15 l3 ± 0,5 1,6 1,6 1,6 1,6 1,6 1,6 2,4 2,4 2,4 3,6 3,6 3,6 3,6 1,75-0,1 1,75-0,1 1,75-0,1 1,75-0,1 1,75-0,1 1,75-0,1 3,3-0,15 3,3-0,15 3,3-0,15 6,25-0,15 6,25-0,15 6,25-0,15 6,25-0,15 1,75+0,08 1,2+0,1 0,9+0,05 1,75+0,08 1,2+0,1 0,9+0,05 2,5+0,1 1,75+0,08 2,8+0,1 3,5+0,1 4,8+0,1 2,5+0,05 2,8+0,1 2,75-0,05 2,75-0,05 2,75-0,05 2,75-0,05 2,75-0,05 2,75-0,05 3,8-0,1 3,8-0,1 3,8-0,1 6,8-0,1 6,8-0,1 6,8-0,1 6,8-0,1 27,4 27,4 27,4 31,4 31,4 31,4 37,0 37,0 37,0 39,6 39,6 39,6 39,6 3,85 3,85 3,85 7,9 7,9 7,9 7,9 7,9 7,9 6,35 6,35 6,35 6,35 37 #1171_CA-COM_englisch_250900 37 18.10.2000, 8:23 Uhr CA-COM Tooling Hand crimp tool for pin / socket contacts acc to VG95234 and Cannon contacts with reduced termination size Contact size Wire size mm2 15 0,3 – 1,5 15S 0,3 – 1,5 25 0,3 – 4,0 Hand crimp tools Order reference Crimp locator Order reference M22520-1-01 995-0001-585 TH 452 995-0002-052 Preumatic crimp tool for pin / socket contacts acc to VG95234 and Cannon contacts with reduced termination size Contact size Wire size mm2 15 0,3 – 1,5 15S 0,3 – 1,5 25 0,3 – 4,0 Pneumatic table crimp tool Order reference Bench mount Order reference Foot pedal Order reference Crimp locator Order reference WA27F-CE 121586-5067 BM-2 121586-5068 WA10 121586-5069 TH 452 995-0002-052 Hydraulic hand crimp tool for pin / socket contacts acc to VG95234 and Cannon contacts with reduced termination size Contact Wire size size mm2 100 2,0 – 10,0 Hand pump Order reference Foot pedal Order reference High pressure hose 2 m Order reference Crimp head Order reference 4601.00000.330 121586-0027 4601.51000.330 121586-0008 4604.00000.020 121586-0023 4632.00000.601 121586-0031 Safety device incl. Bench mounting Order reference Positioner Order reference Crimp Turrets (upper crimp die) Order reference Crimp Turrets (lower crimp die) Order reference CT121086-3079 121086-3079 121086-3080 121086-3080 317-8531-000 317-8531-001 Note: Hydraulic electro pump (HK 12EL) upon request. Insertion tools / Extraction tools Insertion tools Contact size Insertion pliers Extraction tools Part No. Order reference Part No. Order reference Part No. Order reference 15 CIT 16 121086-3008 CIT-F80-16 121086-0097 CET-F80-16 121086-0081 25 CIT 12 121086-3007 CIT-F80-12 121086-0096 CET-F80-12 121086-0080 100 CIT 8 121086-0095 CET-8 121086-0079 Crimp contacts Connectors of series CA-COM and CA-COM-B are also available with crimp contacts for AWG wire sizes. In order to wire, insert and extract these contacts the tools mentioned on this page are needed. All tools have to be ordered separately. Please ask for our detailed Wiring and Assembly instructions. All dimensions are in mm Subject to changes 38 #1171_CA-COM_englisch_250900 38 18.10.2000, 8:23 Uhr CA-COM Hand crimp tool Dimensions (closed, without locator) 220 x 60 x 22 mm Weight (without turret) approx. 800 g Pneumatic crimp tool Pneumatic table crimp tool WA 27F-CE Hydraulic hand crimp tool ➄ ≈ √ ➂ 1 2 3 4 5 6 Hand pump Foot pedal High pressure hose 2 m Crimp head Safety device incl. bench mounting Positioner (to be used with 121086-3079 only) Insertion tools / Extraction tools ➁ ➀ Technical Data Hand pump: Length Width Hight Oil contents Usable oil quality Output per lift 560 mm 140 mm 120 mm 900 cm3 730 cm3 2,5 cm3 High pressure hose: Length 2m Crimp head: Crimp force Lift (with positioners) Weight (incl. oil) 120 kN 25 mm 13 kg approx. Insertion tool Insertion pliers Extraction tool 39 #1171_CA-COM_englisch_250900 39 18.10.2000, 8:23 Uhr CA-COM Product Safety Information THIS NOTE SHOULD BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOGUE. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/CATALOGUE COULD RESULT IN HAZARDOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionisation and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the Product Data Sheet/Catalogue are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires, and leakage currents through carbonisation of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 4. DISPOSAL Incineration of certain materials may release noxious or even toxic fumes. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages can not be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Insulation resistance should be checked to make certain that no low resistance joints or spurious conducting path are existing between contacts and exposed metal parts of the connector body. Further the contact resistance of the connectors should be measured within the electrical circuit in order to identify high resistances which result in excessive connector heating. Always use the correct application tools as specified in the Data Sheet/Catalogue. Do not permit untrained personnel to wire, assemble or tramper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION. 1. Air and creepage paths/Operating voltage The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. 2. Temperature All information given are temperature limits. The operation temperature depends on the individual application. 3. Other important information Cannon continuously endeavours to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalogue and data sheets. 4. Harnessing and Assembly Instructions If applicable, our special harnessing and/or assembly instruction has to be adhered to. This is provided at request. ITT Cannon, a division of ITT Industries, Inc. manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this catalog. Any use or application that deviates from stated operating specifications is not recommended and may be unsafe. No information and data contained in this catalog shall be construed to create any liability on the part of Cannon. Any new issue of this catalog shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This catalog is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this catalog is generally permitted, indicating the source. However, Cannon's prior consent must be obtained in all cases. Cannon is a trademark of ITT Industries, Inc All dimensions are in mm Subject to changes 40 #1171_CA-COM_englisch_250900 40 18.10.2000, 8:23 Uhr CA-COM 41 #1171_CA-COM_englisch_250900 41 18.10.2000, 8:24 Uhr Cannon Worldwide Facilities Austria Afrikanergasse 3 1020 Vienna FAX: (1) 2160948 PH: (1) 2160947 Benelux Residence Leopold Genèvestreet 10 1140 Brussels, Belgium FAX: (02) 7269201 PH: (02) 726 75 94 NL FAX: 31.35.691.8796 PH: 31.35.691.6855 China No. 24, 2 Block Taohuawu New District Zhenjiang, Jiangsu P.R.C. FAX: 86 511 4428616 PH: 86 511 443 3399 Denmark Park Allé 287 A 2605 Brøndby FAX: 43 43 58 58 PH: 43 45 52 88 Finland Virkatie 1 1510 Vantaa FAX:+358 9 70039188 PH: +358 9 70039180 France 2, Ave Sablons Bouillants, B.P. 133 77109 Meaux FAX: (1) 64 33 16 82 PH: (1) 60 24 51 51 Germany Postfach 11 20, 71365 Weinstadt Cannonstrasse 1, 71384 Weinstadt FAX: (07151) 699217 PH: (07151) 699-0 Hong Kong Unit 901 & 912, West Tower Shun Tak Center 168-200 Connaught Road Central FAX: (852) 2732-2919 PH: (852) 2732-2720 Italy Via Panzeri 10 20123 Milano FAX: (02) 8372036 PH: (02) 581801 Japan 5362-1, 5-chome, Hibarigaoka Zama-shi, Kanagawa 228 FAX: 0462-57-1680 PH: 0462-57-2010 Korea 620, Changkang Bldg. #22, Dohwa-dong, Mapo-ku Seoul FAX: (02) 717 7330 PH: (02) 702 7111 Spain Parque Empresarial San Fernando Edificio Italia 1a Planta 28830 Madrid FAX: (34) 91 656 15 83 PH: (34) 91 656 03 11 Sweden Norr Mälarstrand 64 Jaktvarvet 1 11235 Stockholm FAX: (46) 8 650 0072 PH: (46) 8 650 0071 Switzerland Herzogenmühle 18 8304 Wallisellen FAX: (01) 830-3104 PH: (01) 830-3888, 830-3613 United Kingdom Jays Close, Viables Estate Basingstoke Hampshire RG22 4BA FAX: (01256) 323356 PH: (01256) 311200 United States 666 E. Dyer Road Santa Ana, CA 92705-5612 FAX: 714.628.2142 PH: 714.557.4700 INTERNET http://www.ittcannon.com © 2000 ITT Industries, Cannon. Printed in Germany. All Rights Reserved. #1171_CA-COM_englisch_250900 42 18.10.2000, 8:24 Uhr