GBJ1001 THRU GBJ1010 SINGLE-PHASE BRIDGE RECTIFIER GLASS PASSIVATED BRIDGE RECTIFIERS REVERSE VOLTAGE 100 to 1000 Volts FORWARD CURRENT 10 Ampere GBJ FEATURES Rating to 1000V PRV Ideal for printed circuit board Low forward voltage drop, high current capability Reliable low cost construction utilizing molded plastic technique results in inexpensive product The plastic material has UL flammability classification 94V-0 Electrically isolated base-1500 Volts MECHANICAL DATA Polarity: Symbols molded on body Weight: 0.26 ounces, 7.0 grams Mounting position : Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified , Dimensions in inches and (millimeters) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% SYMBOL GBJ1001 GBJ1002 GBJ1004 GBJ1006 GBJ1008 GBJ1010 UNIT PARAMETER Maximum Recurrent Peak Reverse Voltage VRRM 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 100 200 400 600 800 1000 V Maximum Average Forward(with heatsink Note 2) Rectified Current @ TC=110℃(without heatsink) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC METHOD) I(AV) 10.0 3.0 A IFSM 200 A Maximum forward Voltage at 5.0A DC VF 1.0 V Maximum DC Reverse Current @TJ=25℃ at Rated DC Blocking voltage @TJ=125℃ IR 5.0 500 uA I2t Rating for fusing(t<8.3ms) I2t 166 A 2S Typical Junction Capacitance per element(Note 1) CJ 55 RθJC 1.4 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range pF 1- Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2- Device mounted on 150mm x 150mm x 1.6mm Cu Plate Heatsink. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 1 GBJ1001 THRU GBJ1010 RATINGS AND CHARACTERISTIC CURVES Note: Specifications are subject to change without notice. Website: www.kingtronics.com Email: [email protected] Tel: (852) 8106 7033 Fax: (852) 8106 7099 2