IDEA J946B T-1 led indicator, right-angle, pcb mount Datasheet

T-1 LED Indicator, Right-angle, PCB Mount
J946B Series
The J946B is made up of 2 T-1 LED lamps assembled into a black plastic holder and can be CMOS driven to save components. The
leads are formed at right angles to the light emitting side of the assembly for through hole mounting on PCBs. The design of the J946B
holder maintains all external dimensions but will be cored in appropriate places to minimize sink marks. Material of the housing is black
Nylon 6/6 with fiber, rated UL94V0. Please note that the dimensions are in inches.
.14
.19
max
Pin Connection:
.28
.125 max
+ –
(typ for single color)
.600
.85 max
Green
Anode
.55
Red or
yellow
Anode
(typ for bi-color)
.15
.12 min
+
.150
.15
.100
.45
Specify part desired as follows:
J946B/Order Code LED1 + Order Code LED 2
For example:
“J946B/H+G” designates a red LED on top with a green LED below.
ORDER CODE AND INFORMATION (ALL RATINGS AT 25°C AMBIENT)
LED Lamp
Epoxy & Type
TInted Diffused
Typical Characteristics
Peak
Vf (V)
Iv (mcd)
2Θ1/2
λ (nm)
@If=20mA
@If=2 mA
(Deg)
Recom.
Op. If
(mA)
1.8
4.0
50
2 - 10
Color
Order Code
Red
I
639
Green
G
575
1.7
2.5
60
2 - 10
Yellow
Y
591
1.85
4.0
45
2 - 10
* Specifications subject to change without notice. Dimensions are in mm±0.25 unless stated otherwise.
IDEA, Inc., 1351 Titan Way, Brea, CA 92821 Ph:714-525-3302, 800-LED-IDEA; Fax: 714-525-3304 Catalog 995A
Similar pages