This product complies with the RoHS Directive (EU 2002/95/EC). Zener Diodes MAZ2xxx Series (MA2xxx Series) Silicon planar type Unit: mm For stabilization of power supply ■ Features 27 min. Colored band indicatesVz classification Parameter Symbol Rating Unit Repetitive peak forward current IFRM 400 mA PD 1.0 W PZSM 75 W Junction temperature Tj 200 °C Storage temperature Tstg −55 to +200 °C Non-repetitive reverse surge power dissipation *2 27 min. +0.4 2.6–0.2 Anode Cathode 1st Band 2nd Band 3rd Band ■ Absolute Maximum Ratings Ta = 25°C Power dissipation *1 4.0±0.5 φ 0.8±00.5 • High reliability, achieved by the combination the planar type and the glass seal • Large power dissipation PD • Wide voltage range: Zener voltage VZ = 5.1 V to 56.0 V DO-41-A1 Package Note) *1: PD = 1.0 W achieved with a printed circuit board *2: t = 100 µs, Tj = 150°C ■ Common Electrical Characteristics Ta = 25°C ± 3°C *1 Parameter Symbol Conditions Forward voltage VF IF = 200 mA Zener voltage *2 VZ IZ Specified value Zener operating resistance RZ IZ Specified value Reverse current IR VR Specified value Temperature coefficient of zener voltage *3 SZ IZ Specified value Terminal capacitance Ct VR = 0 V, f = 1 MHz Specified value Min Typ Max 1.0 Unit V V Refer to the list of the electrical characteristics within part numbers Ω µA mV/°C pF Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7031 measuring methods for diodes. 2. Absolute frequency of input and output is 5 MHz. 3. *1: The temperature must be controlled 25°C for VZ mesurement. VZ value measured at other temperature must be adjusted to VZ (25°C) 2: V * Z guaranteed 20 ms after current flow. 3: T * j = 25°C to 150°C Note) The part number in the parenthesis shows conventional part number. Publication date: March 2004 SKE00002CED 1 This product complies with the RoHS Directive (EU 2002/95/EC). MAZ2xxx Series ■ Electrical Characteristics within Part Numbers Ta = 25°C ± 3°C IZ (mA) Min Max Reverse current IR (µA) VR (V) Max 40 40 40 40 40 40 40 40 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 4.80 5.20 5.80 6.40 7.00 7.70 8.50 9.40 10.40 11.40 12.40 13.80 15.30 16.80 18.80 20.80 22.80 25.10 28.00 31.00 34.00 37.00 40.00 44.00 48.00 52.00 5.40 6.00 6.60 7.20 7.90 8.70 9.60 10.60 11.60 12.70 14.10 15.60 17.10 19.10 21.20 23.30 25.60 28.90 32.00 35.00 38.00 41.00 46.00 50.00 54.00 60.00 1 2 3 3 3 4 5 7 7 8 9 10 11 12 14 15 16 18 20 22 24 26 29 31 33 35 Zener voltage Part number VZ (V) MAZ2051 MAZ2056 MAZ2062 MAZ2068 MAZ2075 MAZ2082 MAZ2091 MAZ2100 MAZ2110 MAZ2120 MAZ2130 MAZ2150 MAZ2160 MAZ2180 MAZ2200 MAZ2220 MAZ2240 MAZ2270 MAZ2300 MAZ2330 MAZ2360 MAZ2390 MAZ2430 MAZ2470 MAZ2510 MAZ2560 10 8 6 6 5 5 6 6 8 8 10 12 12 15 15 20 20 25 25 30 30 50 50 50 50 50 40 40 40 40 40 40 40 40 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 0 1.5 2.4 3.1 3.8 4.5 5.4 6.3 7.4 8.4 9.4 11.4 12.5 14.5 16.6 18.6 20.7 23.8 26.9 30.0 33.4 36.3 41.1 44.9 48.6 54.9 l l l 25 mm φ 4 mm 0.8 l = 20 mm 10 mm 0.4 0 40 80 120 160 200 Ambient temperature Ta (°C) 240 Brown Blue Red Gray Green Red Brown PZSM tW l 1.2 0.8 l = 27 mm 20 mm 0.4 0 Green Brown Green Blue Blue Red Blue Gray Purple Green Gray Red White Brown Brown Black Brown Brown Brown Red Brown Orange Brown Green Brown Blue Brown Gray Red Black Red Red Red Yellow Red Purple Orange Black Orange Orange Orange Blue Orange White Yellow Orange Yellow Purple Green Brown Green Blue 104 Non-repetitive reverse surge power dissipation PZSM (W) 1.2 200 180 330 280 250 230 220 200 160 160 155 150 135 110 110 95 90 85 80 75 70 65 60 55 50 45 PD Ta Power dissipation PD (W) Power dissipation PD (W) 40 40 40 40 40 40 40 40 20 20 20 20 20 20 20 10 10 10 10 10 10 10 10 10 10 10 Temperature Terminal coefficient of capacitance Marking symbol zener voltage (Color indication) Ct (pF) SZ (mV/°C) (VR = 0 V) IZ f = 1 MHz (mA) Typ 1st. 2nd. 3rd. Typ 1.6 2 mm 2 RZ (Ω) IZ (mA) Max 20 20 20 10 10 10 10 10 5 5 5 5 5 5 5 5 5 2 2 2 2 5 5 5 5 5 PD Ta 1.6 0 Zener operating resistance 0 40 80 120 160 200 Ambient temperature Ta (°C) SKE00002CED 240 PZSM tW Non repetitive 103 102 Tj = 25°C 10 1 10−1 1 10 Pulse width tW (ms) 102 This product complies with the RoHS Directive (EU 2002/95/EC). MAZ2xxx Series IZ V Z IZ VZ MAZ2110 80 MAZ2091 80 2 4 6 8 10 MAZ2160 MAZ2180 MAZ2200 MAZ2220 MAZ2240 40 0 0 MAZ2150 60 20 40 12 0 10 20 IZ V Z 6 8 10 0 0 10 20 30 MAZ2360 MAZ2330 40 Zener current IZ (mA) 80 60 12 MAZ2390 MAZ2430 MAZ2470 MAZ2510 MAZ2560 60 40 20 0 40 0 Zener voltage VZ (V) Zener voltage VZ (V) Zth tW 40 Zth-a 10−1 Zth-m 10−2 10−3 1 10 60 80 RZ IZ 102 Heat sink Thickness t = 1.6 mm Copper foil t = 0.035 mm Anode side φ 3 mm Cathode side φ 3 mm 1 Lead distance 5 mm Zener operating resistance RZ (Ω) Transient thermal impedance Zth (°C / mW) 20 Zener voltage VZ (V) 10 10−1 80 Tj = 25°C Dynamic Characteristics MAZ2110 MAZ2120 MAZ2130 MAZ2150 MAZ2160 MAZ2180 MAZ2200 MAZ2220 20 40 60 IZ VZ MAZ2300 80 10−2 40 100 MAZ2240 Zener current IZ (mA) MAZ2075 MAZ2082 MAZ2091 MAZ2100 Zener current IZ (mA) MAZ2051 MAZ2056 MAZ2062 MAZ2068 10−4 10−3 20 Zener voltage VZ (V) 80 4 0 Tj = 25°C Dynamic Characteristics 160 2 10 IZ VZ Tj = 25°C Dynamic Characteristics 0 MAZ2390 MAZ2430 MAZ2470 MAZ2510 MAZ2560 20 0 40 100 200 120 30 Zener voltage VZ (V) Zener voltage VZ (V) 0 30 MAZ2270 0 MAZ2130 MAZ2270 Zener current IZ (mA) MAZ2075 MAZ2082 120 MAZ2100 Zener current IZ (mA) MAZ2062 MAZ2068 Zener current IZ (mA) MAZ2120 MAZ2051 MAZ2056 Ta = 25°C Static Characteristics MAZ2330 200 Ta = 25°C Static Characteristics MAZ2360 Ta = 25°C Static Characteristics 160 IZ VZ 40 100 MAZ2300 240 102 103 104 Pulse width tW (s) 105 Ta = 25°C 10 MAZ2200 MAZ2150 1 10−1 MAZ2091 MAZ2068 1 10 102 Zener current IZ (mA) SKE00002CED 3 This product complies with the RoHS Directive (EU 2002/95/EC). MAZ2xxx Series Temperature coefficient of zener voltage SZ (mV / °C) SZ I Z 8 Tj = 25°C to 150°C MAZ2100 6 MAZ2091 MAZ2082 4 MAZ2075 MAZ2062 2 MAZ2056 MAZ2051 0 −2 −4 0 10 20 30 40 50 Zener current IZ (mA) 4 SKE00002CED This product complies with the RoHS Directive (EU 2002/95/EC). Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: • Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. • Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd. 2003 SEP