RoHS MB5005-5010 SINGLE-PHASE BRIDGE RECTIFIER D T ,. L FEATURES Low cost High forward surge current capability low thermal resistance. High isolation voltage from case to lugs. High temperature soldering guaranteed: 260/10 second, at 5 lbs. (2.3kg) tension. MECHANICAL DATA Case: Molded body Terminal: Plated 0.25" (6.35mm) lug. Polarity: Polarity symbols marked on case. Mounting: Thru hole for #10 screw, 20 in - lbs. Torque max Weight: 0.84ounce, 24gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20% Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Output Current, at TC = 50 (Note1, 2) Peak Forward Surge Current 8.3ms single half sine - wave superimposed on rated load (JEDEC method ) Rating for Fusing (t<8.3ms) Maximum Instantaneous Forward Voltage Drop per bridge element at 25A Maximum DC Reverse Current at rated TA = 25 DC blocking voltage per element TA Isolation Voltage from case to lugs Typical Thermal Resistance (Note 1, 2) Operating Temperature Range Storage Temperature Range J E SYMBOLS VRRM VRMS VDC E W N MB5005 MB501 MB502 MB504 MB506 R T C E L O IC C O MB508 MB5010 I(AV) Amps IFSM Amps It 2 As VF Volts (-65 to +150) (-65 to +150) Amp mAmp VAC /W IR VISO RJC TJ TSTG 1. Unit Mounted on 9" X 3.5" X 4.6" (23 X 9 X 11.8cm) Al. finned plate. 2. Bolt down on heatsink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw. WEJ ELECTRONIC CO. UNIT Volts Volts Volts Http:// www.wej.cn E-mail:[email protected] 2