Low Power Inductors (Miniature) Designed for General Purpose Applications such as Low Power Ripple Filters or where Inductance Stability with variation in load currents is required. Tape & Reel Available for Surface Mount versions NEW! Electrical Specifications at 25OC Part Number L Nom. (µH) I Max. (A) DCR Fux Nom. Density ( mΩ ) ( V-µS ) L-14900 L-14901 L-14902 L-14903 7.5 10.4 15.0 19.0 0.35 0.29 0.25 0.22 110 162 240 341 L-14904 L-14905 L-14906 L-14907 L-14908 36.5 48.1 61.3 80.0 105.8 0.36 0.32 0.28 0.24 0.21 L-14909 L-14910 L-14911 L-14912 L-14913 75.1 100.7 135.3 168.9 219.7 L-14914 L-14915 L-14916 L-14917 L-14918 102.6 132.5 178.3 223.9 290.2 Package Type Drawing 2.6 3.1 3.7 4.1 6 Pin Dip 6 Pin Dip 6 Pin Dip 6 Pin Dip See Below See Below See Below See Below 267 389 550 776 1130 13.2 15.2 17.1 19.6 22.5 T6 T6 T6 T6 T6 Pg. 38 Fig. 16 Pg. 38 Fig. 16 Pg. 38 Fig. 16 Pg. 38 Fig. 16 Pg. 38 Fig. 16 0.34 0.29 0.25 0.23 0.20 326 479 704 986 1390 25.4 29.4 34.1 38.1 43.5 4 Pin Dip 4 Pin Dip 4 Pin Dip 4 Pin Dip 4 Pin Dip See Below See Below See Below See Below See Below 0.36 0.31 0.27 0.24 0.21 319 461 678 964 1380 36.6 41.6 48.2 54.1 61.6 10 Pin Dip 10 Pin Dip 10 Pin Dip 10 Pin Dip 10 Pin Dip Pg. 38 Fig. 18 Pg. 38 Fig. 18 Pg. 38 Fig. 18 Pg. 38 Fig. 18 Pg. 38 Fig. 18 Schematics For Surface Mount Version add Suffix "G" See pg. 39, fig. 21 for dimensions 2 .470 (11.94) TOP 3 .200 (5.08) See pg. 38, fig. 17 for dimensions For Surface Mount Version add Suffix "G" See pg. 38, fig. 19 for dimensions 6-Pin DIP 4-Pin DIP 1 For Surface Mount Version add Suffix "G" 1 2 3 4 6 5 4 1 2 3 4 .400 (10.16) .435 (11.05) .370 (9.40) .070 (1.78) .145 (3.68) .031 (0.79) DIA. Specifications are subject to change without notice Rhombus Industries Inc. Transformers & Magnetic Products LOW-PWR2 - 2/97 9 15801 Chemical Lane Huntington Beach, California 92649-1595 Phone: (714) 898-0960 • FAX: (714) 896-0971