UniFETTM FDP8N60ZU / FDPF8N60ZUT N-Channel MOSFET, FRFET 600V, 6.5A, 1.35Ω Features Description • RDS(on) = 1.15mΩ ( Typ.) @ VGS = 10V, ID = 3.25A These N-Channel enhancement mode power field effect transistors are produced using Fairchild’s proprietary, planar stripe, DMOS technology. • Low gate charge ( Typ. 20nC) • Low Crss ( Typ. 10pF) This advanced technology has been especially tailored to minimize on-state resistance, provide superior switching performance, and withstand high energy pulse in the avalanche and commutation mode. These devices are well suited for high efficient switched mode power supplies and active power factor correction. • Fast switching • 100% avalanche tested • Improved dv/dt capability • RoHS compliant D G G DS TO-220 FDP Series TO-220F FDPF Series GD S S MOSFET Maximum Ratings TC = 25 C unless otherwise noted* o Symbol VDSS Drain to Source Voltage Parameter VGSS Gate to Source Voltage ID Drain Current FDP8N60ZU FDPF8N60ZUT 600 Units V ±30 V -Continuous (TC = 25oC) 6.5 6.5* -Continuous (TC = 100oC) 3.9 3.9* - Pulsed (Note 1) IDM Drain Current EAS Single Pulsed Avalanche Energy IAR Avalanche Current (Note 1) 6.5 A EAR Repetitive Avalanche Energy (Note 1) 13.5 mJ dv/dt Peak Diode Recovery dv/dt 26* (Note 2) A 420 (Note 3) mJ 20 V/ns (TC = 25oC) 135 34.5 W - Derate above 25oC 1.05 0.28 W/oC PD Power Dissipation TJ, TSTG Operating and Storage Temperature Range Maximum Lead Temperature for Soldering Purpose, 1/8” from Case for 5 Seconds TL 26 A -55 to +150 o C 300 o C *Drain current limited by maximum junction temperature Thermal Characteristics Symbol Parameter FDP8N60ZU FDPF8N60ZUT RθJC Thermal Resistance, Junction to Case 0.95 3.6 RθCS Thermal Resistance, Case to Sink Typ. 0.5 - RθJA Thermal Resistance, Junction to Ambient 62.5 62.5 ©2009 Fairchild Semiconductor Corporation FDP8N60ZU / FDPF8N60ZUT Rev. A 1 Units o C/W www.fairchildsemi.com FDP8N60ZU / FDPF8N60ZUT N-Channel MOSFET April 2009 Device Marking FDP8N60ZU Device FDP8N60ZU Package TO-220 Reel Size - Tape Width - Quantity 50 FDPF8N60ZUT FDPF8N60ZUT TO-220F - - 50 Electrical Characteristics TC = 25oC unless otherwise noted Symbol Parameter Test Conditions Min. Typ. Max. Units Off Characteristics BVDSS ΔBVDSS ΔTJ Drain to Source Breakdown Voltage Breakdown Voltage Temperature Coefficient ID = 250μA, VGS = 0V, TJ = 25oC 600 - - V ID = 250μA, Referenced to 25oC - 0.7 - V/oC IDSS Zero Gate Voltage Drain Current VDS = 600V, VGS = 0V - - 25 VDS = 480V, TC = 125oC - - 250 μA IGSS Gate to Body Leakage Current VGS = ±30V, VDS = 0V - - ±10 μA On Characteristics VGS(th) RDS(on) Gate Threshold Voltage VGS = VDS, ID = 250μA 3.0 - 5.0 V Static Drain to Source On Resistance VGS = 10V, ID = 3.25A - 1.15 1.35 Ω gFS Forward Transconductance VDS = 40V, ID = 3.25A - 7 - S VDS = 25V, VGS = 0V f = 1MHz - 950 1265 pF - 110 150 pF - 10 15 pF - 20 26 nC - 5 - nC - 8 - nC - 20 50 ns - 30 70 ns - 55 120 ns - 35 80 ns Dynamic Characteristics Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Qg Total Gate Charge at 10V Qgs Gate to Source Gate Charge Qgd Gate to Drain “Miller” Charge VDS = 480V, ID = 6.5A VGS = 10V (Note 4) Switching Characteristics td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time VDD = 300V, ID = 6.5A RG = 25Ω, VGS = 10V (Note 4) Drain-Source Diode Characteristics IS Maximum Continuous Drain to Source Diode Forward Current - - 6.5 A ISM Maximum Pulsed Drain to Source Diode Forward Current - - 26 A VSD Drain to Source Diode Forward Voltage VGS = 0V, ISD = 6.5A - - 1.6 V trr Reverse Recovery Time - 40 - ns Qrr Reverse Recovery Charge VGS = 0V, ISD = 6.5A dIF/dt = 100A/μs - 42 - nC Notes: 1: Repetitive Rating: Pulse width limited by maximum junction temperature 2: L = 20mH, IAS = 6.5A, VDD = 50V, RG = 25Ω, Starting TJ = 25°C 3: ISD ≤ 6.5A, di/dt ≤ 200A/μs, VDD ≤ BVDSS, Starting TJ = 25°C 4: Essentially Independent of Operating Temperature Typical Characteristics FDP8N60ZU / FDPF8N60ZUT Rev. A 2 www.fairchildsemi.com FDP8N60ZU / FDPF8N60ZUT N-Channel MOSFET Package Marking and Ordering Information Figure 1. On-Region Characteristics Figure 2. Transfer Characteristics 20 VGS = 15.0 V 10.0 V 8.0 V 7.0 V 6.5 V 6.0 V 5.5 V *Notes: 1. VDS = 20V 2. 250μs Pulse Test 10 ID,Drain Current[A] 10 ID,Drain Current[A] 20 1 o 150 C o 25 C 1 *Notes: 1. 250μs Pulse Test o 2. TC = 25 C 0.1 0.1 1 10 0.1 20 2 VDS,Drain-Source Voltage[V] Figure 3. On-Resistance Variation vs. Drain Current and Gate Voltage 4 6 VGS,Gate-Source Voltage[V] 8 Figure 4. Body Diode Forward Voltage Variation vs. Source Current and Temperature 200 1.5 IS, Reverse Drain Current [A] RDS(ON) [mΩ], Drain-Source On-Resistance 100 1.4 1.3 VGS = 10V 1.2 VGS = 20V 1.1 o 150 C o 25 C 10 *Notes: 1. VGS = 0V 2. 250μs Pulse Test o *Note: TC = 25 C 1.0 0 3 6 ID, Drain Current [A] 9 1 12 0 Figure 5. Capacitance Characteristics Figure 6. Gate Charge Characteristics VGS, Gate-Source Voltage [V] Ciss = Cgs + Cgd (Cds = shorted) Coss = Cds + Cgd Crss = Cgd Capacitances [pF] 4 10 2000 1500 1 2 3 VSD, Body Diode Forward Voltage [V] Coss *Note: 1. VGS = 0V 2. f = 1MHz Ciss 1000 500 VDS = 150V VDS = 300V VDS = 480V 8 6 4 2 Crss 0 0.1 *Note: ID = 6.5A 0 1 10 VDS, Drain-Source Voltage [V] FDP8N60ZU / FDPF8N60ZUT Rev. A 0 30 3 5 10 15 Qg, Total Gate Charge [nC] 20 www.fairchildsemi.com FDP8N60ZU / FDPF8N60ZUT N-Channel MOSFET Typical Performance Characteristics Figure 7. Breakdown Voltage Variation vs. Temperature Figure 8. Maximum Safe Operating Area - FDPF8N60ZUT 50 1.12 1.08 1.04 1.00 100μs 1ms 10ms 1 Operation in This Area is Limited by R DS(on) 0.96 0.1 o 1. TC = 25 C o 2. TJ = 150 C 3. Single Pulse 0.01 -50 0 50 100 150 o TJ, Junction Temperature [ C] DC *Notes: *Notes: 1. VGS = 0V 2. ID = 250μA 0.92 0.88 -100 20μs 10 ID, Drain Current [A] BVDSS, [Normalized] Drain-Source Breakdown Voltage 1.16 200 1 10 100 VDS, Drain-Source Voltage [V] 1000 Figure 9. Maximum Drain Current vs. Case Temperature ID, Drain Current [A] 8 6 Limited by package 4 2 0 25 50 75 100 125 o TC, Case Temperature [ C] 150 Figure 10. Transient Thermal Response Curve - FDPF8N60ZUT Thermal Response [ZθJC] 5 0.5 1 0.2 0.1 PDM 0.05 0.1 t1 0.02 t2 0.01 *Notes: o 0.01 Single pulse 0.005 -5 10 FDP8N60ZU / FDPF8N60ZUT Rev. A 1. ZθJC(t) = 3.6 C/W Max. 2. Duty Factor, D= t1/t2 3. TJM - TC = PDM * ZθJC(t) -4 10 -3 -2 -1 10 10 10 1 Rectangular Pulse Duration [sec] 4 10 2 10 www.fairchildsemi.com FDP8N60ZU / FDPF8N60ZUT N-Channel MOSFET Typical Performance Characteristics (Continued) FDP8N60ZU / FDPF8N60ZUT N-Channel MOSFET Gate Charge Test Circuit & Waveform Resistive Switching Test Circuit & Waveforms Unclamped Inductive Switching Test Circuit & Waveforms FDP8N60ZU / FDPF8N60ZUT Rev. A 5 www.fairchildsemi.com FDP8N60ZU / FDPF8N60ZUT N-Channel MOSFET Peak Diode Recovery dv/dt Test Circuit & Waveforms DUT + V DS _ I SD L D r iv e r R V V GS ( D r iv e r ) G S G S am e T ype as DUT V DD • d v / d t c o n t r o lle d b y R G • I S D c o n t r o lle d b y p u ls e p e r io d G a t e P u ls e W id th D = -------------------------G a te P u ls e P e r io d 10V I F M , B o d y D io d e F o r w a r d C u r r e n t I SD ( DUT ) d i/ d t IR M B o d y D io d e R e v e r s e C u r r e n t V DS ( DUT ) B o d y D io d e R e c o v e r y d v / d t V V SD DD B o d y D io d e F o r w a r d V o lt a g e D r o p FDP8N60ZU / FDPF8N60ZUT Rev. A 6 www.fairchildsemi.com TO-220 4.50 ±0.20 2.80 ±0.10 (3.00) +0.10 1.30 –0.05 18.95MAX. (3.70) ø3.60 ±0.10 15.90 ±0.20 1.30 ±0.10 (8.70) (1.46) 9.20 ±0.20 (1.70) 9.90 ±0.20 (45° 1.52 ±0.10 10.08 ±0.30 (1.00) 13.08 ±0.20 ) 1.27 ±0.10 0.80 ±0.10 2.54TYP [2.54 ±0.20] FDP8N60ZU / FDPF8N60ZUT Rev. A +0.10 0.50 –0.05 2.54TYP [2.54 ±0.20] 7 2.40 ±0.20 www.fairchildsemi.com FDP8N60ZU / FDPF8N60ZUT N-Channel MOSFET Mechanical Dimensions FDP8N60ZU / FDPF8N60ZUT N-Channel MOSFET Mechanical Dimensions TO-220F 3.30 ±0.10 10.16 ±0.20 2.54 ±0.20 ø3.18 ±0.10 (7.00) (1.00x45°) 15.87 ±0.20 15.80 ±0.20 6.68 ±0.20 (0.70) 0.80 ±0.10 0° (3 9.75 ±0.30 MAX1.47 ) #1 +0.10 0.50 –0.05 2.54TYP [2.54 ±0.20] 2.76 ±0.20 2.54TYP [2.54 ±0.20] 9.40 ±0.20 4.70 ±0.20 0.35 ±0.10 Dimensions in Millimeters FDP8N60ZU / FDPF8N60ZUT Rev. A 8 www.fairchildsemi.com tm tm tm *Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation’s Anti-Counterfeiting Policy. Fairchild’s Anti-Counterfeiting Policy is also stated on our external website, www.Fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufactures of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed application, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild’s quality standards for handing and storage and provide access to Fairchild’s full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address and warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I40 FDP8N60ZU / FDPF8N60ZUT Rev. A 9 www.fairchildsemi.com FDP8N60ZU / FDPF8N60ZUT N-Channel MOSFET TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. Auto-SPM™ PowerTrench® F-PFS™ The Power Franchise® Build it Now™ PowerXS™ FRFET® ® CorePLUS™ Programmable Active Droop™ Global Power ResourceSM ® CorePOWER™ QFET Green FPS™ TinyBoost™ CROSSVOLT™ QS™ Green FPS™ e-Series™ TinyBuck™ Quiet Series™ CTL™ Gmax™ TinyLogic® RapidConfigure™ Current Transfer Logic™ GTO™ ® TINYOPTO™ EcoSPARK IntelliMAX™ TinyPower™ EfficentMax™ ISOPLANAR™ ™ TinyPWM™ Saving our world, 1mW /W /kW at a time™ EZSWITCH™ * MegaBuck™ TinyWire™ ™* SmartMax™ MICROCOUPLER™ TriFault Detect™ SMART START™ MicroFET™ TRUECURRENT™* SPM® MicroPak™ ® μSerDes™ STEALTH™ MillerDrive™ Fairchild® SuperFET™ MotionMax™ Fairchild Semiconductor® SuperSOT™-3 Motion-SPM™ FACT Quiet Series™ UHC® SuperSOT™-6 OPTOLOGIC® ® FACT® OPTOPLANAR Ultra FRFET™ SuperSOT™-8 ® FAST® UniFET™ SupreMOS™ FastvCore™ VCX™ SyncFET™ FETBench™ VisualMax™ Sync-Lock™ PDP SPM™ FlashWriter® * XS™ ®* Power-SPM™ FPS™