1812 CHIP INDUCTORS High-Reliability Chip Inductors MS450RAA ■ Higher SRF values than 1812 size parts with ferrite cores ■ 2% and 1% tolerances for all values ■ 9 inductance values from 1.0 to 4.7 µH Part number1 Inductance2 (µH) This robust version of Coilcraft’s standard 1812CS series features high temperature materials that allow operation in ambient temperatures up to 155°C. The leach-resistant base metalization with tin-lead (Sn-Pb) terminations ensures the best possible board adhesion. Percent SRF min4 tolerance Q min3 (MHz) MS450RAA102JSZ 1.0 @ 7.9 MHz MS450RAA122JSZ 1.2 @ 7.9 MHz MS450RAA152_SZ 1.5 @ 7.9 MHz MS450RAA182JSZ 1.8 @ 7.9 MHz MS450RAA222JSZ 2.2 @ 7.9 MHz MS450RAA272JSZ 2.7 @ 7.9 MHz MS450RAA332JSZ 3.3 @ 7.9 MHz MS450RAA392_SZ 3.9 @ 7.9 MHz MS450RAA472JSZ 4.7 @ 7.9 MHz 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 1. When ordering, please specify tolerance and testing codes: MS450RAA333JSZ Tolerance: F = 1% G = 2% J = 5% Testing: Z = COTS H = Screening per Coilcraft CP-SA-10001 N = Screening per Coilcraft CP-SA-10003 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286 impedance analyzer or equivalent with Coilcraft-provided correlation pieces. 3. Q measured at the same frequency as inductance using an Agilent/ HP 4291A with an Agilent/HP 16193 test fixture or equivalents. 4. SRF measured using an Agilent/HP 8753ES network analyzer or equivalent and a Coilcraft SMD-D test fixture. 5. DCR measured on a micro-ohmmeter. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 59 @ 50 MHz 54 @ 50 MHz 57 @ 50 MHz 57 @ 50 MHz 52 @ 50 MHz 53 @ 50 MHz 53 @ 50 MHz 53 @ 50 MHz 32 @ 10 MHz Imax (mA) 1.1 1.2 1.6 2.0 2.2 3.2 3.8 5.0 5.4 530 480 430 380 340 300 270 240 230 Core material Ceramic Terminations Tin-lead (63/37) over silver-platinum-glass frit Ambient temperature –55°C to +125°C with Imax current, +125°C to +155°C with derated current Storage temperature Component: –55°C to +155°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +155 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 600 per 7″ reel Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 3.7 mm pocket depth Document MS105-1 Revised 11/06/12 ® © Coilcraft, Inc. 2012 260 230 210 190 170 160 145 130 115 DCR max5 (Ohms) 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information. 1812 CHIP INDUCTORS MS450RAA Series (1812) Typical Q vs Frequency Typical L vs Frequency 100 6.0 90 5.5 5.0 80 60 50 4.7 µH 40 Inductance (µH) 70 Q Factor 4.7 µH 4.5 1.0 µH 1.5 µH 2.2 µH 3.3 µH 30 4.0 3.3 µH 3.5 3.0 2.5 2.2 µH 2.0 1.5 µH 1.5 20 1.0 µH 1.0 10 0 1 100 10 1000 0.5 0 1 1000 Frequency (MHz) Current Derating B overall 120 110 A 100 90 H C F I G J F 80 E terminal 70 60 D Terminal wraparound: approx 0.007/0,18 both ends I Suggested Land Pattern 50 40 A max B max C max D ref 0.195 0.150 0.135 0.070 4,95 3,81 3,43 1,78 25°C Percent of rated Irms 100 10 Frequency (MHz) 30 20 10 0 -40 -20 0 20 40 60 80 100 120 140 160 E F G H I J 0.100 0.025 0.128 0.120 0.045 0.118 2,54 0,64 3,25 3,05 1,14 3,00 Note: Dimensions are before solder application. For maximum overall dimensions including solder, add 0.0025 in / 0,064 mm to B and 0.006 in / 0,15 mm to A and C. Ambient temperature (°C) Document MS105-2 Revised 11/06/12 ® © Coilcraft, Inc. 2012 1102 Silver Lake Road Cary, IL 60013 Phone 800-981-0363 Fax 847-639-1508 Email [email protected] www.coilcraft-cps.com This product may not be used in medical or high risk applications without prior Coilcraft approval. Specifications subject to change without notice. Please check our web site for latest information.