ON MJW21193 Silicon power transistor Datasheet

MJW21193 (PNP)
MJW21194 (NPN)
Silicon Power Transistors
The MJW21193 and MJW21194 utilize Perforated Emitter
technology and are specifically designed for high power audio output,
disk head positioners and linear applications.
http://onsemi.com
Features
• Total Harmonic Distortion Characterized
• High DC Current Gain −
16 AMPERES
COMPLEMENTARY SILICON
POWER TRANSISTORS
250 VOLTS, 200 WATTS
hFE = 20 Min @ IC = 8 Adc
• Excellent Gain Linearity
• High SOA: 2.25 A, 80 V, 1 Second
• Pb−Free Packages are Available
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector−Emitter Voltage
VCEO
250
Vdc
Collector−Base Voltage
VCBO
400
Vdc
Emitter−Base Voltage
VEBO
5.0
Vdc
Collector−Emitter Voltage − 1.5 V
VCEX
400
Vdc
Collector Current − Continuous
Collector Current − Peak (Note 1)
IC
16
30
Adc
Base Current − Continuous
IB
5.0
Adc
Total Power Dissipation @ TC = 25°C
Derate Above 25°C
PD
200
1.43
W
W/°C
TJ, Tstg
− 65 to
+150
°C
Operating and Storage Junction
Temperature Range
1 2 3
MARKING DIAGRAM
MJW2119x
AYWWG
1 BASE
THERMAL CHARACTERISTICS
Characteristic
TO−247
CASE 340L
STYLE 3
Symbol
Max
Unit
Thermal Resistance,
Junction−to−Case
RθJC
0.7
°C/W
Thermal Resistance,
Junction−to−Ambient
RθJA
40
°C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. Pulse Test: Pulse Width = 5 ms, Duty Cycle ≤ 10%.
2 COLLECTOR
x
A
Y
WW
G
Device
Package
Shipping
MJW21193
TO−247
30 Units/Rail
TO−247
(Pb−Free)
30 Units/Rail
TO−247
30 Units/Rail
TO−247
(Pb−Free)
30 Units/Rail
MJW21194
MJW21194G
March, 2010 − Rev. 4
1
= 3 or 4
= Assembly Location
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
MJW21193G
© Semiconductor Components Industries, LLC, 2010
3 EMITTER
Publication Order Number:
MJW21193/D
MJW21193 (PNP) MJW21194 (NPN)
ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
VCEO(sus)
250
−
−
Vdc
Collector Cutoff Current
(VCE = 200 Vdc, IB = 0)
ICEO
−
−
100
μAdc
Emitter Cutoff Current
(VCE = 5 Vdc, IC = 0)
IEBO
−
−
100
μAdc
Collector Cutoff Current
(VCE = 250 Vdc, VBE(off) = 1.5 Vdc)
ICEX
−
−
100
μAdc
4.0
2.25
−
−
−
−
20
8
−
−
80
−
−
−
2.2
−
−
−
−
1.4
4
OFF CHARACTERISTICS
Collector−Emitter Sustaining Voltage
(IC = 100 mAdc, IB = 0)
SECOND BREAKDOWN
Second Breakdown Collector Current with Base Forward Biased
(VCE = 50 Vdc, t = 1 s (non−repetitive)
(VCE = 80 Vdc, t = 1 s (non−repetitive)
IS/b
Adc
ON CHARACTERISTICS
DC Current Gain
(IC = 8 Adc, VCE = 5 Vdc)
(IC = 16 Adc, IB = 5 Adc)
hFE
Base−Emitter On Voltage
(IC = 8 Adc, VCE = 5 Vdc)
VBE(on)
Collector−Emitter Saturation Voltage
(IC = 8 Adc, IB = 0.8 Adc)
(IC = 16 Adc, IB = 3.2 Adc)
VCE(sat)
Vdc
Vdc
DYNAMIC CHARACTERISTICS
Total Harmonic Distortion at the Output
VRMS = 28.3 V, f = 1 kHz, PLOAD = 100 WRMS
(Matched pair hFE = 50 @ 5 A/5 V)
THD
hFE
unmatched
hFE
matched
−
0.8
−
−
0.08
−
fT
4
−
−
MHz
Cob
−
−
500
pF
Current Gain Bandwidth Product
(IC = 1 Adc, VCE = 10 Vdc, ftest = 1 MHz)
Output Capacitance
(VCB = 10 Vdc, IE = 0, ftest = 1 MHz)
%
NPN MJW21194
f,
T CURRENT GAIN BANDWIDTH PRODUCT (MHz)
f,
T CURRENT GAIN BANDWIDTH PRODUCT (MHz)
PNP MJW21193
6.5
6.0
VCE = 10 V
5.5
5V
5.0
4.5
4.0
3.5
3.0
0.1
TJ = 25°C
ftest = 1 MHz
1.0
10
8.0
7.0
10 V
6.0
5.0
VCE = 5 V
4.0
3.0
2.0
1.0
0
0.1
TJ = 25°C
ftest = 1 MHz
1.0
IC COLLECTOR CURRENT (AMPS)
IC COLLECTOR CURRENT (AMPS)
Figure 1. Typical Current Gain
Bandwidth Product
Figure 2. Typical Current Gain
Bandwidth Product
http://onsemi.com
2
10
MJW21193 (PNP) MJW21194 (NPN)
TYPICAL CHARACTERISTICS
PNP MJW21193
NPN MJW21194
1000
hFE , DC CURRENT GAIN
hFE , DC CURRENT GAIN
1000
TJ = 100°C
25°C
100
-25°C
TJ = 100°C
25°C
100
-25°C
VCE = 20 V
10
0.1
VCE = 20 V
1.0
10
IC COLLECTOR CURRENT (AMPS)
10
0.1
100
Figure 4. DC Current Gain, VCE = 20 V
PNP MJW21193
NPN MJW21194
1000
hFE , DC CURRENT GAIN
hFE , DC CURRENT GAIN
100
Figure 3. DC Current Gain, VCE = 20 V
1000
TJ = 100°C
25°C
100
-25°C
TJ = 100°C
25°C
100
-25°C
VCE = 5 V
10
0.1
VCE = 20 V
1.0
10
IC COLLECTOR CURRENT (AMPS)
10
0.1
100
Figure 5. DC Current Gain, VCE = 5 V
1.0
10
IC COLLECTOR CURRENT (AMPS)
100
Figure 6. DC Current Gain, VCE = 5 V
PNP MJW21193
NPN MJW21194
30
35
25
20
IB = 2 A
I C, COLLECTOR CURRENT (A)
1.5 A
I C, COLLECTOR CURRENT (A)
1.0
10
IC COLLECTOR CURRENT (AMPS)
1A
15
0.5 A
10
5.0
IB = 2 A
30
1.5 A
25
1A
20
15
0.5 A
10
5.0
TJ = 25°C
TJ = 25°C
0
0
0
5.0
10
15
20
VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)
25
0
Figure 7. Typical Output Characteristics
5.0
10
15
20
VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)
Figure 8. Typical Output Characteristics
http://onsemi.com
3
25
MJW21193 (PNP) MJW21194 (NPN)
TYPICAL CHARACTERISTICS
PNP MJW21193
NPN MJW21194
1.4
TJ = 25°C
IC/IB = 10
2.5
2.0
1.5
1.0
VBE(sat)
0.5
TJ = 25°C
IC/IB = 10
1.2
SATURATION VOLTAGE (VOLTS)
SATURATION VOLTAGE (VOLTS)
3.0
1.0
VBE(sat)
0.8
0.6
0.4
0.2
VCE(sat)
VCE(sat)
0
0.1
1.0
10
IC, COLLECTOR CURRENT (AMPS)
0
0.1
100
1.0
10
IC, COLLECTOR CURRENT (AMPS)
Figure 9. Typical Saturation Voltages
Figure 10. Typical Saturation Voltages
NPN MJW21194
10
VBE(on) , BASE-EMITTER VOLTAGE (VOLTS)
VBE(on) , BASE-EMITTER VOLTAGE (VOLTS)
PNP MJW21193
TJ = 25°C
1.0
0.1
0.1
VCE = 5 V (DASHED)
1.0
10
TJ = 25°C
VCE = 20 V (SOLID)
VCE = 5 V (DASHED)
0.1
0.1
100
1.0
10
100
IC, COLLECTOR CURRENT (AMPS)
IC, COLLECTOR CURRENT (AMPS)
Figure 11. Typical Base−Emitter Voltage
Figure 12. Typical Base−Emitter Voltage
PNP MJW21193
NPN MJW21194
100
100
10 mSec
IC, COLLECTOR CURRENT (AMPS)
IC, COLLECTOR CURRENT (AMPS)
10
1.0
VCE = 20 V (SOLID)
100
100 mSec
10
1 Sec
1.0
0.1
10 mSec
100 mSec
10
1 Sec
1.0
0.1
1.0
10
100
1000
1.0
10
100
1000
VCE, COLLECTOR EMITTER (VOLTS)
VCE, COLLECTOR EMITTER (VOLTS)
Figure 13. Active Region Safe Operating Area
Figure 14. Active Region Safe Operating Area
http://onsemi.com
4
MJW21193 (PNP) MJW21194 (NPN)
The data of Figure 13 is based on TJ(pk) = 150°C; TC is
variable depending on conditions. At high case
temperatures, thermal limitations will reduce the power than
can be handled to values less than the limitations imposed by
second breakdown.
There are two limitations on the power handling ability of
a transistor; average junction temperature and secondary
breakdown. Safe operating area curves indicate IC − VCE
limits of the transistor that must be observed for reliable
operation; i.e., the transistor must not be subjected to greater
dissipation than the curves indicate.
10000
10000
TC = 25°C
C, CAPACITANCE (pF)
Cib
1000
Cob
100
0.1
Cib
1000
Cob
f(test) = 1 MHz)
f(test) = 1 MHz)
1.0
10
100
0.1
100
1.0
10
VR, REVERSE VOLTAGE (VOLTS)
VR, REVERSE VOLTAGE (VOLTS)
Figure 15. MJW21193 Typical Capacitance
Figure 16. MJW21194 Typical Capacitance
1.2
1.1
T , TOTAL HARMONIC
HD
DISTORTION (%)
C, CAPACITANCE (pF)
TC = 25°C
1.0
0.9
0.8
0.7
0.6
10
100
1000
10000
100000
FREQUENCY (Hz)
Figure 17. Typical Total Harmonic Distortion
http://onsemi.com
5
100
MJW21193 (PNP) MJW21194 (NPN)
+50 V
AUDIO PRECISION
MODEL ONE PLUS
TOTAL HARMONIC
DISTORTION
ANALYZER
SOURCE
AMPLIFIER
50 Ω
DUT
0.5 Ω
0.5 Ω
DUT
-50 V
Figure 18. Total Harmonic Distortion Test Circuit
http://onsemi.com
6
8.0 Ω
MJW21193 (PNP) MJW21194 (NPN)
PACKAGE DIMENSIONS
TO−247
CASE 340L−02
ISSUE E
−T−
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
C
−B−
E
U
N
L
4
A
−Q−
1
2
0.63 (0.025)
3
M
T B
M
P
−Y−
K
F 2 PL
W
J
D 3 PL
0.25 (0.010)
M
Y Q
MILLIMETERS
MIN
MAX
20.32
21.08
15.75
16.26
4.70
5.30
1.00
1.40
1.90
2.60
1.65
2.13
5.45 BSC
1.50
2.49
0.40
0.80
19.81
20.83
5.40
6.20
4.32
5.49
--4.50
3.55
3.65
6.15 BSC
2.87
3.12
INCHES
MIN
MAX
0.800
8.30
0.620
0.640
0.185
0.209
0.040
0.055
0.075
0.102
0.065
0.084
0.215 BSC
0.059
0.098
0.016
0.031
0.780
0.820
0.212
0.244
0.170
0.216
--0.177
0.140
0.144
0.242 BSC
0.113
0.123
STYLE 3:
PIN 1. BASE
2. COLLECTOR
3. EMITTER
H
G
DIM
A
B
C
D
E
F
G
H
J
K
L
N
P
Q
U
W
S
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
7
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MJW21193/D
Similar pages