2DC4672 NPN SURFACE MOUNT TRANSISTOR Features Mechanical Data • • • • • • • • Epitaxial Planar Die Construction Ideally Suited for Automated Assembly Processes Ideal for Medium Power Switching or Amplification Applications Complementary PNP Type Available (2DA1797) Lead Free By Design/RoHS Compliant (Note 1) "Green" Device (Note 2) Case: SOT89-3L Case Material: Molded Plastic, "Green” Molding Compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish — Matte Tin annealed over Copper leadframe (Lead Free Plating). Solderable per MIL-STD-202, Method 208 Marking Information: See Page 3 Ordering Information: See Page 3 Weight: 0.055 grams (approximate) • • • • • COLLECTOR 2,4 3 E C 4 1 BASE 1 B 3 EMITTER Top View Maximum Ratings 2 C Top View Pin Out Configuration Device Schematic @TA = 25°C unless otherwise specified Characteristic Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Peak Pulse Current Continuous Collector Current Symbol VCBO VCEO VEBO ICM IC Value 60 50 6 6 3 Unit V V V A A Symbol PD RθJA PD RθJA TJ, TSTG Value 0.9 139 2 62.5 -55 to +150 Unit W °C/W W °C/W °C Thermal Characteristics Characteristic Power Dissipation (Note 3) @ TA = 25°C Thermal Resistance, Junction to Ambient Air (Note 3) @ TA = 25°C Power Dissipation (Note 4) @ TA = 25°C Thermal Resistance, Junction to Ambient Air (Note 4) @ TA = 25°C Operating and Storage Temperature Range Electrical Characteristics @TA = 25°C unless otherwise specified Characteristic OFF CHARACTERISTICS Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage (Note 5) Emitter-Base Breakdown Voltage Collector Cut-Off Current Emitter Cut-Off Current ON CHARACTERISTICS (Note 5) Collector-Emitter Saturation Voltage DC Current Gain Symbol Min Typ Max Unit V(BR)CBO V(BR)CEO V(BR)EBO ICBO IEBO 60 50 6 ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ ⎯ 0.1 0.1 V V V μA μA IC = 50μA, IE = 0 IC = 1mA, IB = 0 IE = 50μA, IC = 0 VCB = 60V, IE = 0 VEB = 5V, IC = 0 VCE(SAT) 105 ⎯ ⎯ 350 270 ⎯ mV hFE ⎯ 82 45 IC = 1A, IB = 50mA VCE = 2V, IC = 500mA VCE = 2V, IC = 1.5A Cobo ⎯ 17 ⎯ pF fT ⎯ 180 ⎯ MHz ⎯ Conditions SMALL SIGNAL CHARACTERISTICS Output Capacitance Current Gain-Bandwidth Product Notes: 1. 2. 3. 4. 5. VCB = 10V, IE = 0, f = 1MHz VCE = 2V, IC = 100mA, f = 100MHz No purposefully added lead. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php. Device mounted on FR-4 PCB with minimum recommended pad layout. Device mounted on FR-4 PCB with 1 inch2 copper pad layout. Measured under pulsed conditions. Pulse width = 300μs. Duty cycle ≤2%. 2DC4672 Document number: DS31636 Rev. 3 - 2 1 of 4 www.diodes.com February 2010 © Diodes Incorporated 2DC4672 2.0 1.0 1.6 0.8 IC, COLLECTOR CURRENT (A) PD, POWER DISSIPATION (W) IB = 5mA 1.2 0.8 0.4 IB = 4mA 0.6 IB = 3mA 0.4 IB = 2mA 0.2 IB = 1mA 0 0 0 0 25 50 150 100 125 75 TA, AMBIENT TEMPERATURE (°C) Fig. 1 Power Dissipation vs. Ambient Temperature 2 4 6 8 10 VCE, COLLECTOR-EMITTER VOLTAGE (V) Fig. 2 Typical Collector Current vs. Collector-Emitter Voltage 1 1,000 VCE(SAT), COLLECTOR-EMITTER SATURATION VOLTAGE (V) hFE, DC CURRENT GAIN IC/IB = 20 TA = 150°C TA = 85°C T A = 25°C 100 T A = -55°C TA = 150°C TA = 85°C 0.1 T A = 25°C T A = -55°C 0.01 VCE = 2V 0.001 10 0.1 1.2 VCE = 2V 1.0 0.8 TA = -55°C 0.6 T A = 25°C 0.4 T A = 85°C TA = 150°C 0.2 0 1 10 100 1,000 10,000 IC, COLLECTOR CURRENT (mA) Fig. 5 Typical Base-Emitter Turn-On Voltage vs. Collector Current 2DC4672 Document number: DS31636 Rev. 3 - 2 1 10 100 1,000 10,000 IC, COLLECTOR CURRENT (mA) Fig. 4 Typical Collector-Emitter Saturation Voltage vs. Collector Current VBE(SAT), BASE-EMITTER SATURATION VOLTAGE (V) VBE(ON), BASE-EMITTER TURN-ON VOLTAGE (V) 1 10 100 1,000 10,000 IC, COLLECTOR CURRENT (mA) Fig. 3 Typical DC Current Gain vs. Collector Current 2 of 4 www.diodes.com 1.2 IC/IB = 20 1.0 0.8 TA = -55°C 0.6 T A = 25°C TA = 85°C 0.4 TA = 150°C 0.2 0 1 10 100 1,000 10,000 IC, COLLECTOR CURRENT (mA) Fig. 6 Typical Base-Emitter Saturation Voltage vs. Collector Current February 2010 © Diodes Incorporated 2DC4672 1,000 1,000 fT, GAIN-BANDWIDTH PRODUCT (MHz) CAPACITANCE (pF) f = 1MHz Cibo 100 Cobo 10 0.1 VCE = 2V f = 100MHz 0 10 20 30 40 50 60 70 80 90 100 IC, COLLECTOR CURRENT (mA) Fig. 8 Typical Gain-Bandwidth Product vs. Collector Current (Note 6) Part Number 2DC4672-13 Notes: 10 1 1 10 100 VR, REVERSE VOLTAGE (V) Fig. 7 Typical Capacitance Characteristics Ordering Information 100 Case SOT89-3L Packaging 2500/Tape & Reel 6. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information 4672 = Product Type Marking Code YWW = Date Code Marking Y = Last digit of year (ex: 8 = 2008) WW = Week code 01 - 53 YWW 4672 Package Outline Dimensions R0 D1 .2 00 C E H L B e B1 e1 8° (4 X ) A SOT89-3L Dim Min Max A 1.40 1.60 B 0.44 0.62 B1 0.35 0.54 C 0.35 0.43 D 4.40 4.60 D1 1.52 1.83 E 2.29 2.60 e 1.50 Typ e1 3.00 Typ H 3.94 4.25 L 0.89 1.20 All Dimensions in mm D 2DC4672 Document number: DS31636 Rev. 3 - 2 3 of 4 www.diodes.com February 2010 © Diodes Incorporated 2DC4672 Suggested Pad Layout X1 Dimensions Value (in mm) X1 1.7 X2 0.9 X3 0.4 Y1 2.7 Y2 1.3 Y3 1.9 C 3.0 Y1 X3 X2 Y3 Y2 C IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2010, Diodes Incorporated www.diodes.com 2DC4672 Document number: DS31636 Rev. 3 - 2 4 of 4 www.diodes.com February 2010 © Diodes Incorporated