HCMOS 2.5x2.0mm 2.5V SMD Oscillator Model: F240 Series Rev. 6/30/2011 RoHS Compliant / Pb Free http://www.foxonline.com/need_a_sample.htm Page 1 of 2 FEAtuRES • • • • • Tight Stability 2.5V Operation HCMOS Output Standby Function Tape and Reel (3,000 pcs. STD) 2.6 Ma x • PARt nuMbER SElECtiOn Learn More - Internet Required Model Frequency Operating Part Number Number Stability1 Temperature (ºC) 833J-Frequency-xxxxx F246R -40 ~ +85 ±25PPM 833D-Frequency-xxxxx F247 -10 ~ +70 ±15PPM 833E-Frequency-xxxxx F247R -40 ~ +85 ±15PPM 833F-Frequency-xxxxx F249 -10 ~ +70 ±10PPM 833G-Frequency-xxxxx F249R -40 ~ +85 ±10PPM #3 #4 Frequency Range (MHz) 4.000 ~ 54.000 4.000 ~ 54.000 4.000 ~ 54.000 4.000 ~ 54.000 4.000 ~ 54.000 T op V ie w 2.1 m a x #2 #1 Dot de note s p in 1 . 1.0 Ma x • ElECtRiCAl CHARACtERiStiCS MAX (unless otherwise noted) PARAMETERS Frequency Range (Fo) Storage Temperature Range Supply Voltage (Vdd) Input Current Output Symmetry (50% Vdd) Rise Time (10% ~ 90% Vdd) Fall Time (90% ~ 10% Vdd) Output Voltage (Vol) (Voh) Output Current (Iol) (Ioh) Output Load (HCMOS) Standby Current Start-up Time (Ts) Output Disable Time 2 Output Enable Time 2 Phase Noise (@ 10kHz offset) Period Jitter Reflow Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish 4.000 ~ 54.000 MHz -40ºC ~ +85ºC 2.5V ± 10% 7.0mA 45% ~ 55% 5.0nS 5.0nS 10% Vdd 90% Vdd Min 4mA Min -4mA Min 15pF 10µA 10mS 250nS 10mS -145dBc/Hz Typ. 3pS RMS Typ. 260ºC / 10 Seconds 1 Au over Ni 0.78 B ottom V ie w #1 #2 #4 #3 0.65 0.68 0.95 R e c om m e nde d S o ld e r P a d L a y o u t 0.95 0.8 0.65 0.9 Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, reflow and one year aging. 2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. Note: A 0.01µF bypass capacitor should be placed between Vdd (Pin 4) and GND (Pin 2) to minimize power supply line noise. Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary. All specifications subject to change without notice. 1 All dimensions are in millimeters. P in C o n n e c t io n s # 1 E /D #2 GND # 3 O u t pu t # 4 V DD • EnAblE / DiSAblE FunCtiOn Pin 1 OUTPUT (Pin 3) OPEN 2 ACTIVE '1' Level Vih ≥ 70% Vdd ACTIVE '0' Level Vil ≤ 30% Vdd High Z FOXElectronics 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com EMEA Tel: +44 .11283.568153 | Canada +1.888.438.2369 | Asia Hong Kong Tel: +852.2854.4285 | Japan Tel: +81.3.3374.2079 © 2011 FOX ELECTRONICS | ISO9001:2008 Certified HCMOS 2.5x2.0mm 2.5V SMD Oscillator Model: F240 Series http://www.foxonline.com/need_a_sample.htm • tAPE SPECiFiCAtiOnS (millimeters) MODEl F240 Rev. 6/30/2011 RoHS Compliant / Pb Free Page 1 of 2 A ∅1.5 FOXElectronics • REEl SPECiFiCAtiOnS (millimeters) b C D E F STD Reel QTY MODEl F240 4.0 4.0 3.5 8.0 1.15 3,000 G i J K l M H 2.0 ∅13 ∅21 ∅60 ∅180 9.0 2.0 5570 Enterprise Parkway Fort Myers, Florida 33905 USA +1.239.693.0099 FAX +1.239.693.1554 www.foxonline.com EMEA Tel: +44 .11283.568153 | Canada +1.888.438.2369 | Asia Hong Kong Tel: +852.2854.4285 | Japan Tel: +81.3.3374.2079 © 2011 FOX ELECTRONICS | ISO9001:2008 Certified 35