Honeywell HEL-700-T-1-B Temperature sensor Datasheet

Temperature Sensors
Platinum RTDs
HEL-700
FEATURES
1 Linear resistance vs temperature
1 Accurate and Interchangeable
1 Excellent stability
1 Small for fast response
1 Wide temperature range
1 3-packaging options
HEL-700 Thin Film Platinum RTDs (Resistance Temperature Detectors) provide
excellent linearity, accuracy, stability and
interchangeability. Resistance changes
linearly with temperature. Laser trimming
provides ±0.3°C interchangeability at
25°C.
TYPICAL APPLICATIONS
1 HVAC - room, duct and refrigerant
equipment
1 Electronic assemblies - thermal management, temperature compensation
1 Process control - temperature regulation
1000V, 375 alpha provides 10X greater
sensitivity and signal-to-noise. Both
1000V and 100V provide interchangeabilities of ±0.6°C or better from -100°C to
100C, and ±3.0°C at 500°C.
MOUNTING DIMENSIONS (for reference only)
HEL-700 Ribbon Lead
ORDER GUIDE
HEL-700
Thin Film Platinum RTD
-U
-T
1000V, 0.00375 V/V/°C
100V, 0.00385 V/V/°C DIN Standard
-0
-1
±0.2% Resistance Trim (Standard)
±0.1% Resistance Trim (Optional)
-A
Radial Ribbon Lead
-B
Radial Chip
-C
SMT Axial Flip Chip (1000V
ONLY)
Fig. 1: Linear Output Voltage
HEL-700 Radial Chip
Temperature
Fig. 2: Adjustable Point (Comparator) Interface
HEL-700 SMT (Axial) Flip Chip
Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada
85
Temperature Sensors
Platinum RTDs
HEL-700
FUNCTIONAL BEHAVIOR
RT J R0(1+AT+BT2−100CT3+CT4)
RT J Resistance (V) at temperature T (°C)
R0 J Resistance (V) at 0°C
T J Temperature in °C
AJa+ ad
BJ −ad
CT<0 J − a b
100
1002
1004
CONSTANTS
Alpha, a (°C-1)
0.00375
±0.000029
0.003850
±0.000010
Delta, d (°C)
1.605 ± 0.009
1.4999 ± 0.007
Beta, b (°C)
0.16
0.10863
A (°C )
3.81×10
3.908×10
B (°C-2)
−6.02×10-7
−5.775×10-7
C (°C-4)
−6.0×10-12
−4.183×10-12
-1
-3
ACCURACY VS TEMPERATURE
HEL-700 platinum RTDs are available in two base resistance trim
tolerances: ±0.2% or ±0.1%. The corresponding resistance
interchangeability and temperature accuracy for these tolerances are:
Tolerance
Standard ±0.2%
Optional ±0.1%
Temperature
(°C)
±DR*
(V)
±DT
(°C)
±DR*
(V)
±DT
(°C)
−200
6.8
1.6
5.1
1.2
-3
Both b J 0 and C J 0 for T>0°C
RESISTANCE VS TEMPERATURE CURVE
−100
2.9
0.8
2.4
0.6
0
2.0
0.5
1.0
0.3
100
2.9
0.8
2.2
0.6
200
5.6
1.6
4.3
1.2
300
8.2
2.4
6.2
1.8
400
11.0
3.2
8.3
2.5
500
12.5
4.0
9.6
3.0
600
15.1
4.8
10.4
3.3
*1000V RTD. Divide DR by 10 for 100V RTD.
CAUTION
PRODUCT DAMAGE
The inherent design of this component causes it to be sensitive
to electrostatic discharge (ESD). To prevent ESD-induced
damage and/or degradation, take normal ESD precautions
when handling this product.
SPECIFICATIONS
Sensor Type
Thin film platinum RTD;
R0 J 1000 V @ 0°C; alpha J 0.00375 V/V/°C
R0 J 100 V @ 0°C; alpha J 0.00385 V/V/°C
Temperature Range
−200 to +540°C (−300 to +1000°F)
Temperature Accuracy
±0.5°C or 0.8% of temperature, °C (R0 ±0.2% trim), whichever is greater
±0.3°C or 0.6% of temperature, °C (R0 ±0.1% trim), whichever is greater (optional)
Base Resistance and
Interchangeability, R0 ± DR0
1000 ± 2 V (±0.2%) @ 0°C
1000 ± 1 V (±0.1%) @ 0°C (optional)
Linearity
±0.1% of full scale for temperatures spanning −40° to +125°C
±2.0% of full scale for temperatures spanning −200° to +540°C
Time Constant
<0.15 seconds in water @ 3 ft./sec.
<1 second on metal surfaces: <4 seconds in air @ 10 ft./sec.
Operating Current
2 mA max. For self-heating errors of 1°C
1 mA recommended
Stability
Better than 0.25°C/year: 0.05°C/5 years for occupied environments
Self-Heating
0.3 mW/°C
Insulation Resistance
>50 MV @ 50 VDC @ 25°C
Case Material
99% alumina support, vapor deposited alumina passified resistance portion, refractory glass
passified overall
Lead Material – Ribbon
Platinum ribbon, 0.002 × 0.010 × 0.16 in. long nominal
Lead Pull Strength – Ribbon
200 grams nominal pulling up from surface
86
Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada
Temperature Sensors
Platinum RTDs
HEL-700 Series
FEATURES
1 Linear resistance vs temperature
1 Accurate and Interchangeable
1 Excellent stability
1 Teflon or fiberglass lead wires
1 Wide temperature range
1 Ceramic case material
TYPICAL APPLICATIONS
1 HVAC – room, duct and refrigerant
equipment
1 Instrument and probe assemblies –
temperature compensation
1 Process control – temperature
regulation
ORDER GUIDE
HEL-705
28 ga. TFE Teflon, 2-wire only
28 ga. Fiberglass, 2-wire only
HEL-711
28 ga. TFE Teflon (2-wire 1000V, 3-wire 100V)
HEL-712
28 ga. Fiberglass (2-wire 1000V, 3-wire 100V)
HEL-716
24 ga. TFE Teflon (2-wire 1000V, 3-wire 100V)
HEL-717
24 ga. Fiberglass (2-wire 1000V, 3-wire 100V)
-U
The 1000V, 375 alpha version, provides
10X greater sensitivity and signal-tonoise. Optional NIST calibrations improve accuracy to ±0.03°C at 0°C.
Fig. 1: Wheatstone Bridge 2-Wire Interface
HEL-707
-T
HEL-700 Series elements are fully assembled, ready to use directly or in probe
assemblies without the need for fragile
splices to extension leads.
1000V, 0.00375 V/V/°C
100V, 0.00385 V/V/°C DIN Standard
-0
±0.2% Resistance Trim (Standard)
-1
±0.1% Resistance Trim (Optional)
-12
Fig. 2: Linear Output Voltage
Lead wire length, 12 inches
-00
No NIST calibration
-C1
NIST @ 0°C
-C2
NIST @ 0 & 100°C
-C3
NIST @ 0, 100 & 260°C
Temperature
MOUNTING DIMENSIONS (for reference only)
Fig. 3: Adjustable Point (Comparator) Interface
CAUTION
PRODUCT DAMAGE
The inherent design of this component causes it to be sensitive
to electrostatic discharge (ESD). To prevent ESD-induced
damage and/or degradation, take normal ESD precautions
when handling this product.
Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada
87
Temperature Sensors
Platinum RTDs
HEL-700 Series
FUNCTIONAL BEHAVIOR
RT J R0(1+AT+BT2−100CT3+CT4)
RT J Resistance (V) at temperature T (°C)
R0 J Resistance (V) at 0°C
T J Temperature in °C
AJa+ad
BJ−ad
CT<0 J − a b
100
1002
1004
ACCURACY VS TEMPERATURE
Standard ±0.2%
Optional ±0.1%
Temperature
(°C)
Tolerance
±DR*
(V)
±DT
(°C)
±DR*
(V)
±DT
(°C)
−200
6.8
1.6
5.1
1.2
CONSTANTS
−100
2.9
0.8
2.4
0.6
0
2.0
0.5
1.0
0.3
100
2.9
0.8
2.2
0.6
5.6
1.6
4.3
1.2
Alpha, a (°C )
0.00375
±0.000029
0.003850
±0.000010
200
300
8.2
2.4
6.2
1.8
Delta, d (°C)
1.605 ± 0.009
1.4999 ± 0.007
400
11.0
3.2
8.3
2.5
Beta, b (°C)
0.16
0.10863
500
12.5
4.0
9.6
3.0
A (°C )
3.81×10
3.908×10
600
15.1
4.8
10.4
3.3
B (°C-2)
−6.02×10-7
−5.775×10-7
C (°C-4)
−6.0×10-12
−4.183×10-12
-1
-1
-3
-3
Both b J 0 and C J 0 for T>0°C
RESISTANCE VS TEMPERATURE CURVE
*1000V RTD. Divide D by 10 for 100V RTD.
NIST CALIBRATION
NIST traceable calibration provides resistance readings at 1, 2 or
3 standard temperature points to yield a resistance versus temperature curve with 10x better accuracy.
Calibration
1 Point
2 Point
3 Point
T (°C)
±DT (°C)
±DT (°C)
±DT (°C)
-200
0.9
—
—
-100
0.5
0.27
0.15
0
0.03
0.03
0.03
100
0.4
0.11
0.07
200
0.8
0.2
0.08
300
1.2
0.33
6.2
400
1.6
0.5
8.3
500
2.0
0.8
9.6
600
2.6
1.2
10.4
SPECIFICATIONS
Sensor Type
Thin film platinum RTD;
R0 J 1000 V @ 0°C; alpha J 0.00375 V/V/°C
R0 J 100 V @ 0°C; alpha J 0.00385 V/V/°C
Temperature Range
TFE Teflon: −200° to +260°C (−320° to +500°F)
Fiberglass: −75° to +540°C (−100° to +1000°F)
Temperature Accuracy
±0.5°C or 0.8% of temperature, °C (R0 ±0.2% trim), whichever is greater
±0.3°C or 0.6% of temperature, °C (R0 ±0.1% trim), whichever is greater (optional)
Base Resistance and
Interchangeability, R0 ± DR0
1000 ± 2 V (±0.2%) @ 0°C
1000 ± 1 V (±0.1%) @ 0°C (optional)
Linearity
±0.1% of full scale for temperatures spanning −40° to +125°C
±2.0% of full scale for temperatures spanning −75° to +540°C
Time Constant
<0.5 sec. 0.85 inch O.D. in water at 3 ft/sec; <1.0 sec, 0.85 inch O.D. in still water
Operating Current
2 mA maximum for self heating errors of <1°C; 1 mA recommended
Stability
<0.25°C/year; 0.05°C per 5 years in occupied environments
Self Heating
<15 mW/°C for 0.85 O.D. typical
Insulation Resistance
>50 MV at 50 VDC at 25°C
Construction
Alumina case; Epoxy potting (Teflon leads); Ceramic potting (fiberglass leads)
Lead Material
Nickel coated stranded copper, Teflon or Fiberglass insulated
88
Honeywell 1 MICRO SWITCH Sensing and Control 1 1-800-537-6945 USA 1 F1-815-235-6847 International 1 1-800-737-3360 Canada
Similar pages