LESHAN RADIO COMPANY, LTD. Bias Resistor Transistor MUN2211RT1 MUN2212RT1 MUN2213RT1 MUN2214RT1 MUN2215RT1 MUN2216RT1 MUN2230RT1 MUN2231RT1 MUN2232RT1 MUN2233RT1 MUN2234RT1 NPN Silicon Surface Mount Transistor with Monolithic Bias Resistor Network This new series of digital transistors is designed to replace a single device and its external resistor bias network. The BRT (Bias Resistor Transistor) contains a single transistor with a monolithic bias network consisting of two resistors; a series base resistor and a base–emitter resistor. The BRT eliminates these individual components by integrating them into a single device. The use of a BRT can reduce both system cost and board space. The device is housed in the SC–59 package which is designed for low power surface mount applications. • Simplifies Circuit Design • Reduces Board Space • Reduces Component Count • The SC–59 package can be soldered using wave or reflow. The modified gull–winged leads absorb thermal stress during soldering eliminating the possibility of damage to the die. • Available in 8 mm embossed tape and reel Use the Device Number to order the 7 inch/3000 unit reel. PIN2 base (Input) R1 NPN SILICON BIAS RESISTOR TRANSISTOR 3 PIN3 Collector (Output) 2 R2 1 PIN2 Emitter (Ground) CASE 318–03 , STYLE 1 ( SC – 59 ) MAXIMUM RATINGS (T A = 25°C unless otherwise noted) Rating Collector-Base Voltage Collector-Emitter Voltage Collector Current Total Power Dissipation @ T A = 25°C (1) Derate above 25°C Symbol VCBO V CEO IC PD Value 50 50 100 200 1.6 Unit Vdc Vdc mAdc mW mW/°C Symbol R θ JA T J , T stg Value 625 –65 to +150 Unit °C/W °C TL 260 10 °C Sec THERMAL CHARACTERISTICS Rating Thermal Resistance — Junction-to-Ambient (surface mounted) Operating and Storage Temperature Range Maximum Temperature for Soldering Purposes Time in Solder Bath DEVICE MARKING AND RESISTOR VALUES 8 8 Device Marking R1 (K) R2 (K) MUN2211RT1 8A 10 10 MUN2212RT1 8B 22 22 MUN2213RT1 8C 47 47 MUN2214RT1 8D 10 47 MUN2215RT1 (2) 8E 10 MUN2216RT1 (2) 8F 4.7 MUN2230RT1 (2) 8G 1.0 1.0 MUN2231RT1 (2) 8H 2.2 2.2 MUN2232RT1 (2) 8J 4.7 4.7 MUN2233RT1 (2) 8K 4.7 47 MUN2234RT1 (2) 8L 22 47 1. Device mounted on a FR-4 glass epoxy printed circuit board using the minimum recommended footprint. 2. New devices. Updated curves to follow in subsequent data sheets. P2–1/8 LESHAN RADIO COMPANY, LTD. MUN2211RT1 SERIES ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted) Characteristic Symbol Min Typ Max Unit I CBO I CEO I EBO 50 50 - 100 500 0.5 0.2 0.1 0.2 0.9 1.9 4.3 2.3 1.5 0.18 0.13 - nAdc nAdc mAdc 35 60 80 80 160 160 3.0 8.0 15 80 80 60 100 140 140 350 350 5.0 15 30 200 150 - - - 0.25 OFF CHARACTERISTICS Collector-Base Cutoff Current (VCB=50V, I E = 0) Collector-Emitter Cutoff Current (VCE = 50 V, IB = 0) Emitter-Base Cutoff Current MUN2211RT1 (VEB = 6.0 V, IC = 0) MUN2212RT1 MUN2213RT1 MUN2214RT1 MUN2215RT1 MUN2216RT1 MUN2230RT1 MUN2231RT1 MUN2232RT1 MUN2233RT1 MUN2234RT1 Collector-Base Breakdown Voltage (IC = 10 µA, IE = 0) Collector-Emitter Breakdown Voltage(3)(IC=2.0mA, IB=0) ON CHARACTERISTICS V(BR)CBO V(BR)CEO Vdc Vdc (3) DC Current Gain (VCE = 10 V, IC = 5.0 mA) MUN2211RT1 hFE MUN2212RT1 MUN2213RT1 MUN2214RT1 MUN2215RT1 MUN2216RT1 MUN2230RT1 MUN2231RT1 MUN2232RT1 MUN2233RT1 MUN2234RT1 Collector-Emitter Saturation Voltage (IC=10mA, IE=0.3mA) VCE(sat) (IC = 10 mA, IB = 5 mA) MUN2230RT1 MUN2231RT1 (IC = 10 mA, IB = 1 mA) MUN2215RT1 MUN2216RT1 MUN2232RT1 MUN2233RT1 MUN2234RT1 Output Voltage (on) VOL (VCC=5.0V,VB=2.5V, RL=1.0kΩ) MUN2211RT1 MUN2212RT1 MUN2214RT1 MUN2215RT1 MUN2216RT1 MUN2230RT1 MUN2231RT1 MUN2232RT1 MUN2233RT1 MUN2234RT1 (VCC =5.0V,VB=3.5V, RL= 1.0kΩ) MUN2213RT1 Vdc Vdc - - 0.2 - - 0.2 3. Pulse Test: Pulse Width < 300 ms, Duty Cycle < 2.0% P2–2/8 LESHAN RADIO COMPANY, LTD. MUN2211RT1 SERIES ELECTRICAL CHARACTERISTICS (T A = 25°C unless otherwise noted) (Continued) Characteristic Output Voltage (off) (VCC= 5.0V, VB = 0.5 V, R L = 1.0kΩ) (VCC= 5.0V, VB = 0.050 V, RL =1.0kΩ) MUN2230RT1 (VCC= 5.0V, VB = 0.25 V, RL =1.0kΩ) MUN2215RT1 MUN2216RT1 MUN2233RT1 Input Resistor MUN2211RT1 MUN2212RT1 MUN2213RT1 MUN2214RT1 MUN2215RT1 MUN2216RT1 MUN2230RT1 MUN2231RT1 MUN2232RT1 MUN2233RT1 MUN2234RT1 Resistor Ratio MUN2211RT1 MUN2212RT1 MUN2213RT1 MUN2214RT1 MUN2215RT1 MUN2216RT1 MUN2230RT1 MUN2231RT1 MUN2232RT1 MUN2233RT1 MUN2234RT1 Symbol VOH Min 4.9 Typ — Max — Unit Vdc R1 7.0 15.4 32.9 7.0 7.0 3.3 0.7 1.5 3.3 3.3 15.4 0.8 0.17 — 0.8 0.055 0.38 10 22 47 10 10 4.7 1.0 2.2 4.7 4.7 22 1.0 0.21 — 1.0 0.1 0.47 13 28.6 61.1 13 13 6.1 1.3 2.9 6.1 6.1 28.6 1.2 0.25 — 1.2 0.185 0.56 kΩ R 1 /R 2 P2–3/8 LESHAN RADIO COMPANY, LTD. MUN2211RT1 SERIES V CE( sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS) P D , POWER DISSIPATION (MILLIWATTS) TYPICAL ELECTRICAL CHARACTERISTICS MUN2211RT1 250 200 150 100 R 50 θJA = 625°C/W 0 –50 0 50 10 1 I C /I B =10 T A = –25°C 25°C 0.1 75°C 0.01 0.001 150 0 20 1000 60 80 4 V CE f = 1 MHz = 10 V T A =75°C 25°C –25°C 100 10 l E= 0 V T A = 25°C 3 2 1 0 1 10 100 0 100 20 30 40 50 10 25°C V in , INPUT VOLTAGE (VOLTS) 75°C 10 10 V R , REVERSE BIAS VOLTAGE (VOLTS) Figure 4. Output Capacitance I C , COLLECTOR CURRENT (mA) Figure 3. DC Current Gain I C , COLLECTOR CURRENT (mA) 40 I C , COLLECTOR CURRENT (mA) Figure 2. V CE(sat) versus I C C ob , CAPACITANCE (pF) h FE , DC CURRENT GAIN (NORMALIZED) AMBIENT TEMPERATURE (°C) Figure 1. Derating Curve T A = –25°C 1 0.1 0.01 V O= 5 V 0.001 T A = –25°C V O = 0.2 V 25°C 75°C 1 0.1 0 1 2 3 4 5 6 7 8 9 V in , INPUT VOLTAGE (VOLTS) Figure 5. Output Current versus Input Voltage 10 0 10 20 30 40 50 I C , COLLECTOR CURRENT (mA) Figure 6. Input Voltage versus Output Current P2–4/8 LESHAN RADIO COMPANY, LTD. MUN2211RT1 SERIES h FE , DC CURRENT GAIN (NORMALIZED) V CE( sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS MUN2212RT1 10 I C /I B =10 T A = –25°C 25°C 75°C 1 0.1 0.01 0 20 40 60 V –25°C 100 10 1 10 100 I C , COLLECTOR CURRENT (mA) I C , COLLECTOR CURRENT (mA) Figure 7. V CE(sat) versus I C Figure 8. DC Current Gain 3 I C , COLLECTOR CURRENT (mA) f = 1 MHz l E= 0 V T A = 25°C 2 1 0 10 20 30 40 = 10 V 25°C 100 75°C 25°C T A = –25°C 10 1 0.1 0.01 V O= 5 V 0.001 50 0 1 2 3 4 5 6 7 8 9 10 V R , REVERSE BIAS VOLTAGE (VOLTS) V in , INPUT VOLTAGE (VOLTS) Figure 9. Output Capacitance Figure 10. Output Current versus Input Voltage 100 V in , INPUT VOLTAGE (VOLTS) 0 CE T A =75°C 80 4 C ob , CAPACITANCE (pF) 1000 V O = 0.2 V T A = –25°C 10 75°C 25°C 1 0.1 0 10 20 30 40 50 I C , COLLECTOR CURRENT (mA) Figure 11. Input Voltage versus Output Current P2–5/8 LESHAN RADIO COMPANY, LTD. MUN2211RT1 SERIES h FE , DC CURRENT GAIN (NORMALIZED) V CE( sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS MUN2213RT1 1 I C /I B =10 T A = –25°C 25°C 75°C 0.1 0.01 0 10 20 30 V CE =10V T A =75°C 25°C –25°C 100 10 40 1 10 100 I C , COLLECTOR CURRENT (mA) I C , COLLECTOR CURRENT (mA) Figure 12. V CE(sat) versus I C Figure 13. DC Current Gain 1 100 I C , COLLECTOR CURRENT (mA) f = 1 MHz l E= 0 V T A = 25°C 0.8 0.6 0.4 0.2 0 25°C 75°C 10 T A = –25°C 1 0.1 0.01 V O= 5 V 0.001 0 10 20 30 40 50 0 1 2 3 4 5 6 7 8 9 10 V R , REVERSE BIAS VOLTAGE (VOLTS) V in , INPUT VOLTAGE (VOLTS) Figure 14. Output Capacitance Figure 15. Output Current versus Input Voltage 100 V O = 0.2 V V in , INPUT VOLTAGE (VOLTS) C ob , CAPACITANCE (pF) 1000 T A=–25°C 25°C 10 75°C 1 0.1 0 10 20 30 40 50 I C , COLLECTOR CURRENT (mA) Figure 16. Input Voltage versus Output Current P2–6/8 LESHAN RADIO COMPANY, LTD. MUN2211RT1 SERIES h FE , DC CURRENT GAIN (NORMALIZED) V CE( sat) , MAXIMUM COLLECTOR VOLTAGE (VOLTS) TYPICAL ELECTRICAL CHARACTERISTICS MUN2214RT1 1 T A = –25°C I C /I B =10 25°C 75°C 0.1 0.01 0 10 20 30 40 V CE T A =75°C = 10V 250 25°C 200 –25°C 150 100 50 0 1 2 4 6 8 10 15 20 40 50 60 70 I C , COLLECTOR CURRENT (mA) I C , COLLECTOR CURRENT (mA) Figure 17. V CE(sat) versus I C Figure 18. DC Current Gain 80 90 100 100 3.5 f = 1 MHz l E= 0 V 3 T A= 25°C I C , COLLECTOR CURRENT (mA) 4 2.5 2 1.5 1 0.5 0 0 2 4 6 8 10 15 20 25 30 35 40 45 75°C 25°C T A = –25°C 10 V O= 5 V 1 50 0 1 2 3 4 5 6 7 8 9 10 V R , REVERSE BIAS VOLTAGE (VOLTS) V in , INPUT VOLTAGE (VOLTS) Figure 19. Output Capacitance Figure 20. Output Current versus Input Voltage 10 V in , INPUT VOLTAGE (VOLTS) C ob , CAPACITANCE (pF) 300 T A = –25°C V O = 0.2 V 25°C 75°C 1 0.1 0 10 20 30 40 50 I C , COLLECTOR CURRENT (mA) Figure 21. Input Voltage versus Output Current P2–7/8 LESHAN RADIO COMPANY, LTD. MUN2211RT1 SERIES +12 V ISOLATED LOAD FROM µP OR OTHER LOGIC Figure 22. Level Shifter: Connects 12 or 24 Volt Circuits to Logic +12 V V CC OUT IN LOAD Figure 23. Open Collector Inverter: Inverts the Input Signal Figure 24. Inexpensive, Unregulated Current Source P2–8/8