Series AM1/4L-NZ 1/4 Watt | DC-DC Converter FEATURES: • • • • • • • • RoHS Compliant SMD Package Low ripple and noise High efficiency up to 68% Operating temperature -40oC to + 85oC Input/Output Isolation 1000 and 3000VDC Pin compatible with multiple manufacturers UL94-VO Package Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) AM1/4L-0303S-NZ AM1/4L-0305S-NZ AM1/4L-0312S-NZ AM1/4L-0315S-NZ AM1/4L-0503S-NZ AM1/4L-0505S-NZ AM1/4L-0509S-NZ AM1/4L-0512S-NZ AM1/4L-0515S-NZ AM1/4L-0524S-NZ AM1/4L-1203S-NZ AM1/4L-1205S-NZ AM1/4L-1212S-NZ AM1/4L-2405S-NZ AM1/4L-2412S-NZ AM1/4L-2415S-NZ 3-3.6 3-3.6 3-3.6 3-3.6 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 12 15 3.3 5 9 12 15 24 3.3 5 12 5 12 15 75 50 20 16 75 50 27 20 16 10 75 50 20 50 20 16 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 60 60 63 64 61 64 65 66 67 64 60 65 66 60 64 63 AM1/4L-0303SH30-NZ AM1/4L-0305SH30-NZ AM1/4L-0505SH30-NZ AM1/4L-1205SH30-NZ AM1/4L-1212SH30-NZ 3-3.6 3-3.6 4.5-5.5 10.8-13.2 10.8-13.2 3.3 5 5 5 12 75 50 50 50 20 3000 3000 3000 3000 3000 60 60 64 66 67 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) AM1/4L-0505D-NZ AM1/4L-0512D-NZ AM1/4L-0515D-NZ AM1/4L-0524D-NZ AM1/4L-1205D-NZ AM1/4L-1212D-NZ AM1/4L-1215D-NZ AM1/4L-2405D-NZ AM1/4L-2412D-NZ AM1/4L-2415D-NZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±12 ±15 ±24 ±5 ±12 ±15 ±5 ±12 ±15 ±25 ±11 ±9 ±5 ±25 ±11 ±9 ±25 ±11 ±9 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 63 65 67 64 66 67 67 62 68 67 AM1/4L-0505DH30-NZ AM1/4L-1205DH30-NZ 4.5-5.5 10.8-13.2 ±5 ±5 ±25 ±25 3000 3000 64 66 Model Models Dual output Model NOTE: Add suffix “TR” to a part number when ordering in tape and reel package www.aimtec.com F 051e R8.F Tel: +1 514 620 2722 1 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1/4L-NZ 1/4 Watt | DC-DC Converter Input Specifications Parameters Voltage range Nominal Typical 3 5 12 24 Maximum 3-3.6 4.5-5.5 10.8-13.2 21.6-26.4 Capacitor Filter Units VDC Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec Rated Units 1000 & 3000 VDC MOhm pF Maximum Units > 1000 60 Output Specifications Parameters Voltage accuracy Voltage balance Line voltage regulation (Single) Line voltage regulation (Dual) Load voltage regulation (Single) Load voltage regulation (Dual) Temperature coefficient Ripple & Noise Conditions Typical See the tolerance graph Dual Output For 1% change of Vin For 1% change of Vin Load 10 – 100% Load 10 – 100% ±5 ±2 ±1.2 ±1.2 10 10 ±0.03 75 At 20MHz Bandwidth % % % % % % %/oC mV p-p General Specifications Parameters Switching frequency Short circuit protection Operating temperature Storage temperature Cooling Humidity Case material Weight Conditions Typical 100% load single 100% load dual 100 150 Momentary (1sec) -40 to +85 -55 to +125 Free air convection Without derating Maximum Units KHz KHz o o C C 95 % Plastic UL94-VO 1.5 g Single 1000VDC 0.50 x 0.44 x 0.26 inch 12.70 x 11.20 x 6.70 mm Dimensions (L x W x H) Dual 1000VDC 0.60 x 0.44 x 0.26 inch 15.24 x 11.20 x 6.70 mm Single and Dual 3000 VDC 0.60 x 0.44 x 0.26 inch 15.24 x 11.20 x 6.70 mm MTBF >3 500 000hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) o Max Case Temperature 95 C NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified www.aimtec.com F 051e R8.F Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1/4L-NZ 1/4 Watt | DC-DC Converter Pin Out Specifications Single and Dual 1000VDC Pin Single 1 2 3 4 5 6 7 8 - V Input + V Input N.C. - V Output + V Output N.C. N.C. N.C. Pin Out Specifications Single and Dual 3000VDC Pin Dual 1 2 3 4 5 6 7 8 9 10 - V Input + V Input N.C. Common - V Output N.C. + V Output N.C. N.C. N.C. Dimensions Single 1000VDC Single Dual 1 2 3 5 6 7 8 10 11 12 - V Input + V Input N.C. -V Output N.C. N.C. +V Output N.C. N.C. N.C. - V Input + V Input N.C. Common -V Output N.C. +V Output N.C. N.C. N.C. Front View 6.70 (0.26) Side View 4.13 (0.16) Pin A 6.00 6.25 (0.24) (0.25) 0.30 (0.01) 0.25 (0.01) 1.85 (0.07) Top View 7.00 (0.28) A 12.70 (0.50) 7.62 (0.30) 0.50 (0.02) 5.00º angle 11.20 7.50 (0.44) (0.30) 1.50 (0.06) 1 2.54 (0.10) 0.50 (0.02) All dimensions are in mm (inch) All Pins are on a 2.54mm (0.10inch) pitch with tolerance of ±0.25mm (0.01inch) Front View Dimensions Dual 1000VDC 6.70 (0.26) Side View 4.13 (0.16) 6.00 (0.24) A 6.25 (0.25) 0.30 (0.01) 0.25 (0.01) 1.85 (0.07) Top View 7.00 (0.28) 15.24 (0.60) A 7.62 (0.30) 0.50 (0.02) 11.20 7.50 (0.44) (0.30) 5.00º angle 1 2.54 (0.10) 0.50 (0.02) 1.50 (0.06) All dimensions are in mm (inch) All Pins are on a 2.54mm (0.10inch) pitch with tolerance of ±0.25mm (0.01inch) www.aimtec.com F 051e R8.F Tel: +1 514 620 2722 3 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1/4L-NZ 1/4 Watt | DC-DC Converter Dimensions single and dual 3000VDC Front View Side View 6.70 (0.26) 4.13 (0.16) 6.00 (0.24) A 6.25 (0.25) 0.30 (0.01) 0.25 (0.01) 1.85 (0.07) 7.00 (0.28) Top View A 15.24 (0.60) 0.50 (0.02) 11.20 7.50 (0.44) (0.30) 5.00º angle 1 0.50 (0.02) 2.54 (0.10) 1.50 (0.06) All dimensions are in mm (inch) All Pins are on a 2.54mm (0.10inch) pitch with tolerance of ±0.25mm (0.01inch) Typical characteristics Tolerance Envelope Graph +10 % Typical Load Line + 5% +2.5% -2.5% Output Voltage Nominal Voltage -7.5% 10% 50% Output Current (%) 100% NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R8.F Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (924 6832) North America only