Burr-Brown OPA336N Single-supply, micropower cmos operational amplifiers cmos operational amplifier Datasheet

OPA
OPA336
OPA2336
OPA4336
433
6
OPA
336
OPA2
336
SBOS068C – JANUARY 1997 – REVISED JANUARY 2005
SINGLE-SUPPLY, microPower
CMOS OPERATIONAL AMPLIFIERS
microAmplifier ™ Series
FEATURES
DESCRIPTION
●
●
●
●
●
●
●
OPA336 series microPower CMOS operational amplifiers
are designed for battery-powered applications. They
operate on a single supply with operation as low as 2.1V.
The output is rail-to-rail and swings to within 3mV of the
supplies with a 100kΩ load. The common-mode range
extends to the negative supply—ideal for single-supply
applications. Single, dual, and quad versions have identical
specifications for maximum design flexibility.
SINGLE-SUPPLY OPERATION
RAIL-TO-RAIL OUTPUT (within 3mV)
microPOWER: IQ = 20µA/Amplifier
microSIZE PACKAGES
LOW OFFSET VOLTAGE: 125µV max
SPECIFIED FROM VS = 2.3V to 5.5V
SINGLE, DUAL, AND QUAD VERSIONS
In addition to small size and low quiescent current
(20µA/amplifier), they feature low offset voltage
(125µV max), low input bias current (1pA), and high openloop gain (115dB). Dual and quad designs feature
completely independent circuitry for lowest crosstalk and
freedom from interaction.
APPLICATIONS
●
●
●
●
●
●
●
BATTERY-POWERED INSTRUMENTS
PORTABLE DEVICES
HIGH-IMPEDANCE APPLICATIONS
PHOTODIODE PRE-AMPS
PRECISION INTEGRATORS
MEDICAL INSTRUMENTS
TEST EQUIPMENT
OPA336 packages are the tiny SOT23-5 surface mount
and SO-8 surface-mount. OPA2336 come in the miniature
MSOP-8 surface-mount, SO-8 surface-mount, and DIP-8
packages. The OPA4336 package is the space-saving
SSOP-16 surface-mount. All are specified from
–40°C to +85°C and operate from –55°C to +125°C.
A macromodel is available for download (at www.ti.com)
for design analysis.
OPA336
Out
1
V–
2
+In
3
5
V+
4
–In
OPA4336
Out A
1
–In A
2
A
SOT23-5
OPA336
OPA2336
NC
1
8
NC
Out A
1
–In
2
7
V+
–In A
2
+In
3
6
Output
+In A
3
V–
4
5
NC
V–
4
SO-8
A
B
DIP-8, SO-8, MSOP-8
16
Out D
15
–In D
D
+In A
3
14
+In D
V+
4
13
V–
+In B
5
12
+In C
8
V+
7
Out B
–In B
6
11
–In C
6
–In B
Out B
7
10
Out C
5
+In B
NC
8
9
NC
B
C
SSOP-16
NC = No Connection
NC = No Connection
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
All trademarks are the property of their respective owners.
Copyright © 1997-2005, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
www.ti.com
PACKAGE/ORDERING INFORMATION(1)
PRODUCT
PACKAGE-LEAD
PACKAGE
DRAWING
DESIGNATOR
Single
OPA336N
OPA336NA
OPA336NJ
OPA336U
OPA336UA
OPA336UJ
SOT23-5
SOT23-5
SOT23-5
SO-8 Surface-Mount
SO-8 Surface-Mount
SO-8 Surface-Mount
DBV
DBV
DBV
D
D
D
A36(2)
A36(2)
J36
OPA336U
OPA336UA
OPA336UJ
Dual
OPA2336E
OPA2336EA
OPA2336P
MSOP-8 Surface-Mount
MSOP-8 Surface-Mount
DIP-8
DGK
DGK
P
B36(2)
B36(2)
OPA2336P
PACKAGE
MARKING
OPA2336PA
DIP-8
P
OPA2336PA
OPA2336U
OPA2336UA
SO-8 Surface-Mount
SO-8 Surface-Mount
D
D
OPA2336U
OPA2336UA
Quad
OPA4336EA
SSOP-16 Surface-Mount
DBQ
OPA4336EA
NOTES: (1) For the most current package and ordering information, see the package option addendum at the end of this data sheet. (2) Grade will be marked on
the Reel.
ELECTROSTATIC
DISCHARGE SENSITIVITY
ABSOLUTE MAXIMUM RATINGS(1)
Supply Voltage ................................................................................... 7.5V
Signal Input Terminals, Voltage(2) ..................... (V–) –0.3V to (V+) +0.3V
Current(2) .................................................... 10mA
Output Short-Circuit(3) .............................................................. Continuous
Operating Temperature .................................................. –55°C to +125°C
Storage Temperature ..................................................... –55°C to +125°C
Junction Temperature ...................................................................... 150°C
Lead Temperature (soldering, 10s) ................................................. 300°C
ESD Rating:
Charged Device Model, OPA336 NJ and UJ only (CDM)(4) ....... 1000V
Human Body Model (HBM)(4) ......................................................... 500V
Machine Model (MM)(4) .................................................................. 100V
NOTES: (1) Stresses above these ratings may cause permanent damage.
Exposure to absolute maximum conditions for extended periods may
degrade device reliability. These are stress ratings only. Functional operation of the device at these conditions, or beyond the specified operating
conditions, is not implied. (2) Input terminals are diode-clamped to the power
supply rails. Input signals that can swing more than 0.3V beyond the supply
rails should be current-limited to 10mA or less. (3) Short-circuit to ground,
one amplifier per package. (4) OPA336 NJ and UJ have been tested to CDM
of 1000V. All other previous package versions have been tested using HBM
and MM. Results are shown.
2
This integrated circuit can be damaged by ESD. Texas
Instruments recommends that all integrated circuits be handled
with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.
ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits
may be more susceptible to damage because very small
parametric changes could cause the device not to meet its
published specifications.
OPA336, 2336, 4336
www.ti.com
SBOS068C
ELECTRICAL CHARACTERISTICS: VS = 2.3V to 5.5V
Boldface limits apply over the specified temperature range, TA = –40°C to +85°C.
At TA = +25°C, VS = +5V, and RL = 25kΩ connected to VS/2, unless otherwise noted.
OPA336N, U
OPA2336E, P, U
PARAMETER
OFFSET VOLTAGE
Input Offset Voltage
vs Temperature
vs Power Supply
Over Temperature
Channel Separation, dc
CONDITION
VOS
dVOS/dT
PSRR
INPUT BIAS CURRENT
Input Bias Current
Over Temperature
Input Offset Current
MIN
TYP(1)
MAX
±60
±125
25
100
130
±1.5
VS = 2.3V to 5.5V
VS = 2.3V to 5.5V
±1
IOS
±1
NOISE
Input Voltage Noise, f = 0.1 to 10Hz
Input Voltage Noise Density, f = 1kHz en
Current Noise Density, f = 1kHz
in
3
40
30
VCM
CMRR
–0.2V < VCM < (V+) –1V
–0.2V < VCM < (V+) –1V
–0.2
80
76
INPUT IMPEDANCE
Differential
Common-Mode
OPEN-LOOP GAIN
Open-Loop Voltage Gain
Over Temperature
Over Temperature
FREQUENCY RESPONSE
Gain-Bandwidth Product
Slew Rate
Overload Recovery Time
AOL RL = 25kΩ, 100mV < VO < (V+) – 100mV
RL = 25kΩ, 100mV < VO < (V+) – 100mV
RL = 5kΩ, 500mV < VO < (V+) – 500mV
RL = 5kΩ, 500mV < VO < (V+) – 500mV
GBW
SR
Over Temperature
POWER SUPPLY
Specified Voltage Range
Minimum Operating Voltage
Quiescent Current (per amplifier)
Over Temperature
TEMPERATURE RANGE
Specified Range
Operating Range
Storage Range
Thermal Resistance
SOT-23-5 Surface-Mount
MSOP-8 Surface-Mount
SO-8 Surface-Mount
DIP-8
SSOP-16 Surface-Mount
DIP-14
100
100
90
90
✻
70
✻
76
74
VS
IQ
2.3
90
90
✻
✱
IO = 0
IO = 0
–40
–55
–55
✻
✱
✻
✻
✻
✻
✻
76
74
90
90
✻
✱
✻
✻
32
36
+85
+125
+125
✻
✻
✻
V
dB
dB
✻
✻
Ω || pF
Ω || pF
✻
dB
dB
dB
dB
✻
kHz
V/µs
µs
✻
✱
✻
✱
✻
✻
✻
✻
✻
✻
✻
✻
23
✻
✻
✻
θJA
200
150
150
100
100
80
µVp-p
nV/√Hz
fA/√Hz
✻
✻
✻
✱
✻
✻
✻
✻
✻
✻
pA
pA
pA
86
✻
✻
✻
✱
✻
✱
✻
✻
✻
✻
✱
✻
✻
✻
✻
✻
✻
✻
±500 ±2500
µV
✱
µV/°C
✻
✻
µV/V
✱
µV/V
✻
µV/V
✻
✻
✻
86
✻
✻
100
100
500
500
TYP MAX UNITS
✻
✻
✻
✻
5.5
2.1
20
✻
✱
✻
✻
±5
See Text
ISC
CLOAD
✻
✱
MIN
✻
✻
✻
106
3
20
±500
±10
115
RL = 100kΩ, AOL ≥ 70dB
RL = 25kΩ, AOL ≥ 90dB
RL = 25kΩ, AOL ≥ 90dB
RL = 5kΩ, AOL ≥ 90dB
RL = 5kΩ, AOL ≥ 90dB
✻
✱
✻
✻
(V+) –1
100
0.03
100
MAX
±10
±60
90
VS = 5V, G = 1
VS = 5V, G = 1
VIN • G = VS
TYP
OPA336NJ, UJ
✻
1013 || 2
1013 || 4
OUTPUT
Voltage Output Swing from Rail(2)
Over Temperature
Short-Circuit Current
Capacitive Load Drive
MIN
0.1
IB
INPUT VOLTAGE RANGE
Common-Mode Voltage Range
Common-Mode Rejection Ratio
Over Temperature
OPA336NA, UA
OPA2336EA, PA, UA
OPA4336EA
✻
✻
mV
mV
mV
mV
mV
mA
pF
38
42
V
V
µA
µA
✻
✻
✻
°C
°C
°C
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
✻Specifications same as OPA2336E, P, U.
NOTES: (1) VS = +5V. (2) Output voltage swings are measured between the output and positive and negative power-supply rails.
OPA336, 2336, 4336
SBOS068C
www.ti.com
3
TYPICAL CHARACTERISTICS
At TA = +25°C, VS = +5V, and RL = 25kΩ connected to VS/2, unless otherwise noted.
POWER-SUPPLY and COMMON-MODE
REJECTION RATIO vs FREQUENCY
OPEN-LOOP GAIN/PHASE vs FREQUENCY
100
100
G
0
–45
40
–90
Φ
20
–135
0
–180
PSRR, CMRR (dB)
60
CMRR
80
Phase (°)
Voltage Gain (dB)
80
60
PSRR
40
20
–20
0
1
10
100
1k
10k
100k
1M
1
10
Frequency (Hz)
100
1k
100k
QUIESCENT CURRENT vs TEMPERATURE
QUIESCENT CURRENT vs SUPPLY VOLTAGE
30
30
Per Amplifier
Per Amplifier
VS = +5V
Quiescent Current (µA)
25
Quiescent Current (µA)
10k
Frequency (Hz)
25
20
15
20
15
10
VS = +2.3V
5
0
10
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
–75
6.0
–50
–25
SHORT-CIRCUIT CURRENT vs SUPPLY VOLTAGE
50
75
100
125
8
7
±5
Short-Circuit Current (mA)
Short-Circuit Current (mA)
25
SHORT-CIRCUIT CURRENT vs TEMPERATURE
±6
+ISC
±4
±3
±2
–ISC
±1
VS = +5V
6
–ISC
5
4
+ISC
+ISC
3
VS = +2.3V
2
–ISC
1
0
0
2.0
2.5
3.0
3.5
4.0
4.5
5.0
5.5
6.0
–75
Supply Voltage (V)
4
0
Temperature (°C)
Supply Voltage (V)
–50
–25
0
25
50
75
100
125
Temperature (°C)
OPA336, 2336, 4336
www.ti.com
SBOS068C
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VS = +5V, and RL = 25kΩ connected to VS/2, unless otherwise noted.
INPUT VOLTAGE AND CURRENT NOISE
SPECTRAL DENSITY vs FREQUENCY
CHANNEL SEPARATION vs FREQUENCY
1k
150
100
100
10
10
Current Noise (fA/√Hz)
140
130
Dual and Quad devices, G = 1, all
channels. Quad measured channel A
to D or B to C—other combinations
yield improved rejection.
120
Current Noise
110
1
1
10
100
1k
10k
100
100k
1k
120
AOL
VS = +5.5V
AOL, CMRR, PSRR (dB)
4
3
VS = +2.3V
2
1
110
100
PSRR
90
CMRR
80
70
0
1k
100
10k
–75
100k
–50
–25
0
25
50
75
100
Frequency (Hz)
Temperature (°C)
OFFSET VOLTAGE
PRODUCTION DISTRIBUTION
OFFSET VOLTAGE DRIFT MAGNITUDE
PRODUCTION DISTRIBUTION
25
125
25
Percent of Amplifiers (%)
Typical production
distribution of
packaged units.
15
10
5
0.1% 0.3%
0.2% 0.1%
20
15
10
5
Offset Voltage (µV)
4
3.5
3.75
3
3.25
2.5
2.75
2
2.25
1.5
1
1.25
Offset Voltage Drift (µV/°C)
OPA336, 2336, 4336
SBOS068C
0.5
0.25
500
400
300
200
100
0
–100
–200
–300
–400
0
–500
0
Typical production
distribution of
packaged units.
0.75
Output Voltage (Vp-p)
5
Percent of Amplifiers (%)
100k
AOL, CMRR, PSRR vs TEMPERATURE
MAXIMUM OUTPUT VOLTAGE vs FREQUENCY
6
20
10k
Frequency (Hz)
Frequency (Hz)
1.75
Voltage Noise (nV/√Hz)
Voltage Noise
Channel Separation (dB)
1k
www.ti.com
5
TYPICAL CHARACTERISTICS (Cont.)
At TA = +25°C, VS = +5V, and RL = 25kΩ connected to VS/2, unless otherwise noted.
INPUT BIAS CURRENT
vs INPUT COMMON-MODE VOLTAGE
INPUT BIAS CURRENT vs TEMPERATURE
4
Input Bias Current (pA)
Input Bias Current (pA)
1k
100
10
1
3
VS = +5V
2
1
0
0.1
–75
–50
–25
0
25
50
Temperature (°C)
75
100
0
125
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
1
2
3
Common-Mode Voltage (V)
4
OUTPUT VOLTAGE SWING vs OUTPUT CURRENT
5
–2.5
VS = ±2.5V
VS = +5V
–2.0
–55°C
Sourcing
Current
+125°C
+25°C
Output Voltage (V)
4
Output Voltage (V)
5
3
VS = +2.3V
+125°C
2
–55°C
1
Sinking
Current
–1.5
+125°C
–1.0
–55°C
–0.5
+25°C
+25°C
0
0
0
1
2
3
4
5
Output Current (mA)
6
7
8
–0
–2
–3
–4
–5
Output Current (mA)
–6
–7
–8
LARGE-SIGNAL STEP RESPONSE
G = 1, CL = 620pF, VS = +5V
20mV/div
500mV/div
SMALL-SIGNAL STEP RESPONSE
G = 1, CL = 200pF, VS = +5V
200µs/div
50µs/div
6
–1
OPA336, 2336, 4336
www.ti.com
SBOS068C
APPLICATIONS INFORMATION
OPA336 series op amps are fabricated on a state-of-the-art
0.6 micron CMOS process. They are unity-gain stable and
suitable for a wide range of general-purpose applications.
Power-supply pins should be bypassed with 0.01µF ceramic
capacitors. OPA336 series op amps are protected against
reverse battery voltages.
Normally, input bias current is approximately 1pA. However, input voltages exceeding the power supplies can
cause excessive current to flow in or out of the input pins.
Momentary voltages greater than the power supply can be
tolerated as long as the current on the input pins is limited
to 10mA. This is easily accomplished with an input resistor, as shown in Figure 2.
OPERATING VOLTAGE
+5V
OPA336 series op amps can operate from a +2.1V to +5.5V
single supply with excellent performance. Most behavior
remains unchanged throughout the full operating voltage
range. Parameters which vary significantly with operating
voltage are shown in the typical characteristics. OPA336
series op amps are fully specified for operation from +2.3V
to +5.5V; a single limit applies over the supply range. In
addition, many parameters are ensured over the specified
temperature range, –40°C to +85°C.
INPUT VOLTAGE
The input common-mode range of OPA336 series op amps
extends from (V–) – 0.2V to (V+) – 1V. For normal
operation, inputs should be limited to this range. The
absolute maximum input voltage is 300mV beyond the
supplies. Thus, inputs greater than the input
common-mode range but less than maximum input voltage, while not valid, will not cause any damage to the op
amp. Furthermore, the inputs may go beyond the power
supplies without phase inversion, as shown in Figure 1,
unlike some other op amps.
IOVERLOAD
10mA max
VOUT
OPAx336
VIN
5kΩ
FIGURE 2. Input Current Protection for Voltages Exceeding
the Supply Voltage.
CAPACITIVE LOAD AND STABILITY
OPA336 series op amps can drive a wide range of capacitive loads. However, all op amps under certain conditions
may become unstable. Op-amp configuration, gain, and
load value are just a few of the factors to consider when
determining stability.
When properly configured, OPA336 series op amps can
drive approximately 10,000pF. An op amp in unity-gain
configuration is the most vulnerable to capacitive load. The
capacitive load reacts with the op amp’s output resistance,
along with any additional load resistance, to create a pole in
the response which degrades the phase margin. In unity gain,
OPA336 series op amps perform well with a pure capacitive
load up to about 300pF. Increasing gain enhances the
amplifier’s ability to drive loads beyond this level.
One method of improving capacitive load drive in the
unity-gain configuration is to insert a 50Ω to 100Ω resistor
inside the feedback loop, as shown in Figure 3. This reduces
ringing with large capacitive loads while maintaining DC
6V
VOUT
RS
100Ω
OPAx336
0V
VOUT
VIN
CL
FIGURE 1. No Phase Inversion with Inputs Greater than the
Power-Supply Voltage.
FIGURE 3. Series Resistor in Unity-Gain Configuration
Improves Capacitive Load Drive.
OPA336, 2336, 4336
SBOS068C
RL
www.ti.com
7
accuracy. For example, with RL = 25kΩ, OPA336 series op
amps perform well with capacitive loads in excess of 1000pF,
as shown in Figure 4. Without RS, capacitive load drive is
typically 350pF for these conditions, as shown in Figure 5.
Figure 5 shows the recommended operating regions for the
OPA336. Decreasing the load resistance generally improves
capacitive load drive. Figure 5 also illustrates how stability
differs depending on where the resistive load is connected.
With G = +1 and RL = 10kΩ connected to VS/2, the OPA336
can typically drive 500pF. Connecting the same load to
ground improves capacitive load drive to 1000pF.
20mV/div
RS = 100Ω, Load = 2kΩ || 1000pF, VS = +5V
Direct Current (DC) error at the output; however, this error
may be insignificant. For instance, with RL = 100kΩ and
RS = 100Ω, there is only about a 0.1% error at the output.
10k
50µs/div
FIGURE 4. Small-Signal Step Response Using Series Resistor to Improve Capacitive Load Drive.
Alternatively, the resistor may be connected in series with
the output outside of the feedback loop. However, if there is
a resistive load parallel to the capacitive load, it and the
series resistor create a voltage divider. This introduces a
8
Capacitive Load (pF)
Operation Above Selected Gain
Curve Not Recommended
G = +1
RL to Ground
G = +2
RL to Ground
1k
G = +1
RL to VS/2
VS = +5V, VO = VS/2
100
5
10
100
Resistive Load (kΩ)
FIGURE 5. Stability—Capacitive Load vs Resistive Load.
OPA336, 2336, 4336
www.ti.com
SBOS068C
PACKAGE OPTION ADDENDUM
www.ti.com
15-Jun-2007
PACKAGING INFORMATION
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
OPA2336E/250
ACTIVE
MSOP
DGK
8
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336E/250G4
ACTIVE
MSOP
DGK
8
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336E/2K5
ACTIVE
MSOP
DGK
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336E/2K5G4
ACTIVE
MSOP
DGK
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336EA/250
ACTIVE
MSOP
DGK
8
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336EA/250G4
ACTIVE
MSOP
DGK
8
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336EA/2K5
ACTIVE
MSOP
DGK
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336EA/2K5G4
ACTIVE
MSOP
DGK
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336P
ACTIVE
PDIP
P
8
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
N / A for Pkg Type
OPA2336PA
ACTIVE
PDIP
P
8
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
N / A for Pkg Type
OPA2336PAG4
ACTIVE
PDIP
P
8
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
N / A for Pkg Type
OPA2336PG4
ACTIVE
PDIP
P
8
50
Green (RoHS &
no Sb/Br)
CU NIPDAU
N / A for Pkg Type
OPA2336U
ACTIVE
SOIC
D
8
100
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336U/2K5
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336U/2K5G4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336UA
ACTIVE
SOIC
D
8
100
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336UA/2K5
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336UA/2K5G4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336UAG4
ACTIVE
SOIC
D
8
100
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA2336UG4
ACTIVE
SOIC
D
8
100
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA336N/250
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
OPA336N/250G4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
OPA336N/3K
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
OPA336N/3KG4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
OPA336NA/250
ACTIVE
SOT-23
DBV
5
250
CU NIPDAU
Level-1-260C-UNLIM
Addendum-Page 1
Green (RoHS &
no Sb/Br)
Lead/Ball Finish
MSL Peak Temp (3)
PACKAGE OPTION ADDENDUM
www.ti.com
15-Jun-2007
Orderable Device
Status (1)
Package
Type
Package
Drawing
Pins Package Eco Plan (2)
Qty
OPA336NA/250G4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
OPA336NA/3K
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
OPA336NA/3KG4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
OPA336NJ/250
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
OPA336NJ/250G4
ACTIVE
SOT-23
DBV
5
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
OPA336NJ/3K
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
OPA336NJ/3KG4
ACTIVE
SOT-23
DBV
5
3000 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-1-260C-UNLIM
Lead/Ball Finish
MSL Peak Temp (3)
OPA336P
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
OPA336PA
OBSOLETE
PDIP
P
8
TBD
Call TI
Call TI
OPA336U
ACTIVE
SOIC
D
8
100
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA336U/2K5
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA336U/2K5G4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA336UA
ACTIVE
SOIC
D
8
100
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA336UA/2K5
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA336UA/2K5G4
ACTIVE
SOIC
D
8
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA336UAG4
ACTIVE
SOIC
D
8
100
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA336UG4
ACTIVE
SOIC
D
8
100
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA4336EA/250
ACTIVE
SSOP/
QSOP
DBQ
16
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA4336EA/250G4
ACTIVE
SSOP/
QSOP
DBQ
16
250
Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA4336EA/2K5
ACTIVE
SSOP/
QSOP
DBQ
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA4336EA/2K5G4
ACTIVE
SSOP/
QSOP
DBQ
16
2500 Green (RoHS &
no Sb/Br)
CU NIPDAU
Level-2-260C-1 YEAR
OPA4336PA
OBSOLETE
PDIP
N
14
TBD
Call TI
Call TI
(1)
The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in
a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2)
Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check
http://www.ti.com/productcontent for the latest availability information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Addendum-Page 2
PACKAGE OPTION ADDENDUM
www.ti.com
15-Jun-2007
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements
for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered
at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and
package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS
compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame
retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material)
(3)
MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder
temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is
provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the
accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take
reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on
incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited
information may not be available for release.
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI
to Customer on an annual basis.
Addendum-Page 3
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device
Package Package Pins
Type Drawing
SPQ
Reel
Reel
Diameter Width
(mm) W1 (mm)
A0 (mm)
B0 (mm)
K0 (mm)
P1
(mm)
W
Pin1
(mm) Quadrant
OPA2336E/250
MSOP
DGK
8
250
180.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
OPA2336E/2K5
MSOP
DGK
8
2500
330.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
OPA2336EA/250
MSOP
DGK
8
250
180.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
OPA2336EA/2K5
MSOP
DGK
8
2500
330.0
12.4
5.3
3.4
1.4
8.0
12.0
Q1
OPA2336U/2K5
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
OPA2336UA/2K5
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
OPA336N/250
SOT-23
DBV
5
250
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
OPA336N/3K
SOT-23
DBV
5
3000
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
OPA336NA/250
SOT-23
DBV
5
250
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
OPA336NA/3K
SOT-23
DBV
5
3000
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
OPA336NJ/250
SOT-23
DBV
5
250
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
OPA336NJ/3K
SOT-23
DBV
5
3000
179.0
8.4
3.2
3.2
1.4
4.0
8.0
Q3
OPA336U/2K5
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
OPA336UA/2K5
SOIC
D
8
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
OPA4336EA/250
SSOP/
QSOP
DBQ
16
250
180.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
OPA4336EA/2K5
SSOP/
QSOP
DBQ
16
2500
330.0
12.4
6.4
5.2
2.1
8.0
12.0
Q1
Pack Materials-Page 1
PACKAGE MATERIALS INFORMATION
www.ti.com
11-Mar-2008
*All dimensions are nominal
Device
Package Type
Package Drawing
Pins
SPQ
Length (mm)
Width (mm)
Height (mm)
OPA2336E/250
MSOP
DGK
8
250
184.0
184.0
50.0
OPA2336E/2K5
MSOP
DGK
8
2500
346.0
346.0
29.0
OPA2336EA/250
MSOP
DGK
8
250
184.0
184.0
50.0
OPA2336EA/2K5
MSOP
DGK
8
2500
346.0
346.0
29.0
OPA2336U/2K5
SOIC
D
8
2500
346.0
346.0
29.0
OPA2336UA/2K5
SOIC
D
8
2500
346.0
346.0
29.0
OPA336N/250
SOT-23
DBV
5
250
195.0
200.0
45.0
OPA336N/3K
SOT-23
DBV
5
3000
195.0
200.0
45.0
OPA336NA/250
SOT-23
DBV
5
250
195.0
200.0
45.0
OPA336NA/3K
SOT-23
DBV
5
3000
195.0
200.0
45.0
OPA336NJ/250
SOT-23
DBV
5
250
195.0
200.0
45.0
OPA336NJ/3K
SOT-23
DBV
5
3000
195.0
200.0
45.0
OPA336U/2K5
SOIC
D
8
2500
346.0
346.0
29.0
OPA336UA/2K5
SOIC
D
8
2500
346.0
346.0
29.0
OPA4336EA/250
SSOP/QSOP
DBQ
16
250
190.5
212.7
31.8
OPA4336EA/2K5
SSOP/QSOP
DBQ
16
2500
346.0
346.0
29.0
Pack Materials-Page 2
MECHANICAL DATA
MPDI001A – JANUARY 1995 – REVISED JUNE 1999
P (R-PDIP-T8)
PLASTIC DUAL-IN-LINE
0.400 (10,60)
0.355 (9,02)
8
5
0.260 (6,60)
0.240 (6,10)
1
4
0.070 (1,78) MAX
0.325 (8,26)
0.300 (7,62)
0.020 (0,51) MIN
0.015 (0,38)
Gage Plane
0.200 (5,08) MAX
Seating Plane
0.010 (0,25) NOM
0.125 (3,18) MIN
0.100 (2,54)
0.021 (0,53)
0.015 (0,38)
0.430 (10,92)
MAX
0.010 (0,25) M
4040082/D 05/98
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. Falls within JEDEC MS-001
For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Clocks and Timers
Interface
Logic
Power Mgmt
Microcontrollers
RFID
RF/IF and ZigBee® Solutions
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
www.ti.com/clocks
interface.ti.com
logic.ti.com
power.ti.com
microcontroller.ti.com
www.ti-rfid.com
www.ti.com/lprf
Applications
Audio
Automotive
Broadband
Digital Control
Medical
Military
Optical Networking
Security
Telephony
Video & Imaging
Wireless
www.ti.com/audio
www.ti.com/automotive
www.ti.com/broadband
www.ti.com/digitalcontrol
www.ti.com/medical
www.ti.com/military
www.ti.com/opticalnetwork
www.ti.com/security
www.ti.com/telephony
www.ti.com/video
www.ti.com/wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated
Similar pages