Token LRP12JTRWSR050 Metal strip chip high power low ohmic resistor Datasheet

Version:
January 12, 2017
(LRP) Metal Strip
Chip High Power
Low Ohmic Resistor
Token Electronics Industry Co., Ltd.
Web: www.token.com.tw
Email: [email protected]
Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
New Taipei City, Taiwan, R.O.C. 24872
Tel: +886 2981 0109
Fax: +886 2988 7487
China:
12F, Zhong Xing Industry Bld., Chuang Ye Road,
Nan Shan District, Shen Zhen City,
Guang Dong, China 518054
Tel: +86 755 26055363; Fax: +86 755 26055365
 Product Introduction
Things go better with Token (LRP) high power metal
strip resistors.
Features :
 Customized Resistance Available.
 Low TCR ±50PPM/℃, ±75PPM/℃.
 High power rating from 1 Watts to 3 Watts
 Low resistance values from 7mΩ to 100mΩ.
 Without Laser Trimmed with very low
inductance.
Applications :
 For NB power management.
 For MB power management.
 For Monitor power management.
 SWPS: DC-DC converter, Charger, Adaptor.
(LRP) Low ohm metal strip resistors from Token Electronics offer
a wide range of high-power current sensing applications including
power management of NB, MB and monitor, automotive, shunts
and power amplifiers, DC-DC converter and charger, test &
measurement instruments, linear power supplies and switching.
(LRP) Design for applications that require high power handling
(Up to 3W) and low resistance values from 7mΩ to 100mΩ and
come with a range of advantages including a wide temperature
range and a varied choice of wide range package sizes 2512 with
high current capability.
Token (LRP) is aiming for very high power-to-footprint size ratio,
excellent frequency response and very low inductance in a solid
metal nickel-chrome or manganese-copper allow resistive element with Low TCR ±50PPM/℃. Also,
(LRP) is ideal for all types of voltage division, current sensing and pulse applications.
For more power metal strip chip low ohm resistors, please link to Token official website “Current
Sense Resistors”. Contact us with your specific needs.
http://www.token.com.tw
Taiwan Factory: +886 2 29810109
[email protected]
China Factory: +86 755 26055363
Page: 1/7
 Construction & Dimensions
Dimensions Chip 2512 (LRP)
Type
LRP12
Size (Inch)
2512
L(mm)
6.40±0.25
W(mm)
3.20±0.25
T(mm)
0.70±0.20
D(mm)
0.90±0.30
Chip 2512 Dimensions (LRP)
Construction (LRP)
a
b
c
d
e
f
Overcoat
Marking
Alloy Plate
Internal Electrode
Barrier Layer
Solder Plating
Notice: TOKEN is capable of manufacturing the optional spec based on customer's requirement.
http://www.token.com.tw
Taiwan Factory: +886 2 29810109
[email protected]
China Factory: +86 755 26055363
Page: 2/7
 Electrical Specification
Electrical Specifications Chip 2512 (LRP)
Type
LRP12
(2512)
Power Rating at
70℃
Operating Temp.
Range
1W, 2W, 3W
-55℃ ~ +170℃
TCR (±PPM/
℃)
Resistance
Tolerance (± %)
Resistance (mΩ)
±0.5%, ±1%, ±5%
15, 18, 20, 22, 25, 30, 33,
35, 39, 40, 47, 50, 60, 68,
70, 75, 80, 82, 90, 91, 100
7, 8, 9, 10, 12, 15, 18, 20,
22, 25, 30, 33, 35, 39, 40,
47, 50, 60, 68, 70, 75, 80,
82, 90, 91, 100
±50
±75
Operating Current I = √( 𝐏 / 𝐑 ) Operating Voltage V = √𝐏 ∗ 𝐑. or Max. Operating voltage whichever is lower.
Token is capable of manufacturing the optional spec based on customer’s requirement.
Derating Curve (LRP)
(LRP) Power Derating Curve
Recommend Land Pattern (LRP)
Type
A (mm)
B (mm)
C (mm)
LRP12
4.00
2.00
3.50
Recommend Land Pattern
FR4 copper board, 100μm of copper pad thickness.
http://www.token.com.tw
Taiwan Factory: +886 2 29810109
[email protected]
China Factory: +86 755 26055363
Page: 3/7
 Reel & Tape
Packing Quantity & Reel Specifications (LRP)
Type
Packaging Quantity
Tape Width
Reel
Diameter
ΦA (mm)
ΦB (mm)
ΦC (mm)
W (mm)
T (mm)
LRP12
Embossed 4,000 pcs
12 mm
7 inch
178.0±1.5
60.0±1.0
13.0±0.5
13.0±1.0
15.5±0.5
Reel Specifications Dimensions
Emboss Plastic Tape Specifications (LRP)
Type
A (mm)
B (mm) W (mm) E (mm) F (mm) P0(mm) P1(mm) P2(mm) ΦD0(mm) ΦD1(mm)
T
LRP12 3.50±0.10 6.70±0.10 12.0±0.30 1.75±0.10 5.5±0.05 4.0±0.10 4.0±0.10 2.0±0.05 1.50±0.10 1.50±0.25 1.2±0.15
Low Ohm Metal Strip (LRP) Emboss Plastic Tape Specifications
Notice:
1. The cumulative tolerance of 10 sprocket hole pitch is ±0.2mm.
2. Carrier camber shall be not more than 1mm per 100mm through a length of 250mm.
3. A & B measured 0.3mm from the bottom of the packet.
4. t measured at a point on the inside bottom of the packet to the top surface of the carrier.
5. Pocket position relative to sprocket hole is measured as the true position of the pocket and not the pocket hole.
http://www.token.com.tw
Taiwan Factory: +886 2 29810109
[email protected]
China Factory: +86 755 26055363
Page: 4/7
 Reflow Soldering
Soldering Condition (Reflow soldering only) (LRP)
(LRP) Reflow Soldering
Time of IR reflow soldering at maximum temperature point 260℃:10s
Time of soldering iron at maximum temperature point 410℃:5s
http://www.token.com.tw
Taiwan Factory: +886 2 29810109
[email protected]
China Factory: +86 755 26055363
Page: 5/7
 Environmental Characteristics
Environmental Characteristics (LRP)
Item
Requirement Test Method
Thermal Shock
±1%
Short Time Overload
±1%
Low Temperature Storage
±1%
Biased Humidity
±1%
Bending Strength
±1%
Endurance
±1%
Dry Heat
±1%
Resistance to Soldering Heat
±0.5%
Insulation Resistance
>100MΩ
Solderability
95% min
coverage
Temperature Coefficient of
Resistance (T.C.R.)
As Spec.
IEC-60115-1 4.19
JIS-C-5201-1 4.19
-55℃ ~ 155℃, 5 cycles
IEC60115-1 4.13
JIS-C-5201-1 4.13
5*rated power for 5 seconds
IEC-60115-1 4.23.4
JIS-C-5201-1 4.23.4
at-55℃ for 1000 hrs
MIL-STD-202 Method 103
1000 hrs 85℃/85% RH 10% of operating power
IEC-60115-1 4.33
JIS-C-5201-1 4.33
Bending width 2mm once for 5 seconds
IEC60115-1 4.25
JIS-C-5201-1 4.25.1
70±2℃, RCWV for 1000 hrs with 1.5 hrs “ON” and 0.5
hrs “OFF”
IEC60115-1 4.23.2
JIS-C-5201-1 4.23.2
at +170℃ for 1000 hrs
IEC-60115-1 4.18
JIS-C-5201-1 4.18
260±5℃, for 10 seconds
IEC60115-1 4.6
JIS-C-5201-1 4.13
100V DC for 1 minute
IEC-60115-1 4.17
JIS-C-5201-1 4.17
245±5℃ for 3 seconds
IEC60115-1 4.8
JIS-C-5201-1 4.8
-55℃ ~+125℃. (25℃ is the reference temperature)
Rated continuous Working Voltage (RCWV) = √𝐏𝐨𝐰𝐞𝐫 𝐑𝐚𝐭𝐢𝐧𝐠 × 𝐑𝐞𝐬𝐢𝐬𝐭𝐚𝐧𝐜𝐞 𝐕𝐚𝐥𝐮𝐞 (𝛀) or Max. Operating voltage
whichever is lower.
Storage Temperature: 25±3℃; Humidity < 80%RH;
http://www.token.com.tw
Taiwan Factory: +886 2 29810109
[email protected]
China Factory: +86 755 26055363
Page: 6/7
 Order Codes
Order Codes (LRP)
LRP
12
F
TR
D
S
R050
Product
Type
Dimensions
(L×W)(mm)
Resistance
Tolerance
(%)
Package
TCR
(PPM/℃)
Power
Rating(W)
Resistance
(Ω)
D
±50
T
1
R015 0.015
W
±75
S
2
R050 0.05
R
3
12 EIA2512
D
±0.5
F
±1
J
±5
TR
Taping
Reel
Marking
No
Marking
 General Information
Your Current Options - Token Current Sense
As the world becomes more and more technology-driven, the uses for current sensing components will
continue to increase. The need for even lower resistance value ranges is already becoming evident, as
is the need for these resistors to handle more power. The industry-wide trend is the emergence of
smaller and smaller products.
Token Electronics offers a wide variety of current sensing products from the industry to military
standards, such as current sense in Thin-Film / Thick-Film Technology, Bare Element Resistors, and
Open Air Shunts. This enables Token to present an astounding number of possible solutions for any
circuit design needs.
Applications of Current Detecting Components
Token's TCS and CS Series unique form factor provides automotive designers with several advantages.
Both TCS and CS Series are ideal for applications involving window lift motors, fuel pump systems,
seat belt pretensioners, and pulse width modulator feedback.
The wider resistive element and lower resistance enables higher current to pass through the device.
Token's LRC ultra low Ohmic metal strip chip series provides the inherent ability to flex slightly and
offers stress relief during extreme temperature cycling on typical or metal substrates. This LRC series
is suitable for switch power supply applications (DC-DC Converter, Charger, and Adaptor) and power
management of monitor.
The open air design of bare element resistor LRA and LRB Series provide a far cooler operation by
allowing more air flow under the resistive element to keep excess heat from being transmitted to the
PC board. They are suitable for high power AC/DC detection of power supply circuit.
Token axial moulded BWL series provides power rating up to 10 watts and lower resistance 0.005Ω, is
ideal for all types of current sensing applications including switching and linear power supplies,
instruments and power amplifiers.
Token standard current sensing components can be replacement for Vishay, IRC, Ohmite, KOA, Yageo
devices with fast delivery and more competitive price. Contact us with your specific needs.
http://www.token.com.tw
Taiwan Factory: +886 2 29810109
[email protected]
China Factory: +86 755 26055363
Page: 7/7
Similar pages