AZ1117I LOW DROPOUT LINEAR REGULATOR WITH INDUSTRIAL TEMPERATURE RANGE Description Pin Assignments (Top View) NEW PRODUCT The AZ1117I is available in industrial temperature range low dropout three-terminal regulator. The AZ1117I is optimized for low voltage where transient response and minimum input voltage are critical. It provides current limit and thermal shutdown. Its circuit includes a trimmed bandgap reference to assure output voltage accuracy to be within ±1%. On-chip thermal shutdown provides protection against a combination of high current and ambient temperature that would create excessive junction temperature. VOUT 3 INPUT 2 OUTPUT 1 ADJ/GND SOT223 (Top View) The AZ1117I is available in 1.2V, 1.5V, 1.8V, 2.5V, 3.3V, 5.0V fixed output voltage versions and ADJ output voltage version. The fixed versions integrate the adjust resistors. It is also available in an adjustable version which can set the output voltage with two external resistors. 3 2 1 The AZ1117I is available in the industry-standard SOT223 and TO252-2 power packages. INPUT OUTPUT ADJ/GND TO252-2 Features Applications Current Limit: 1.35A (Typ) Output Noise from 10Hz to 10KHz: 0.003% of VOUT USB Device PSRR at IOUT = 300mA and f = 120Hz: 70dB Add-on Card Output Voltage Accuracy: ±1% (Except 1.2V Version) DVD Player On-chip Thermal Shutdown PC Motherboard Maximum Quiescent Current: IQMAX = 6mA Compatible with Low ESR Ceramic Capacitor Operation Junction Temperature: -40°C to +125°C Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green‖ products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. AZ1117I Document number: DS38213 Rev. 1 - 2 1 of 15 www.diodes.com December 2015 © Diodes Incorporated AZ1117I Typical Applications Circuit (Note 4) VIN=11V 9V AZ1117I-ADJ 3 10F + INPUT OUTPUT 2 + 22F ADJ NEW PRODUCT 1 R1 124 R2 VOUT=VREF * ( 1+R2/R1) + IADJ * R2 768 VIN=5.3V AZ1117I-3.3 3 10F + INPUT OUTPUT 3.3V 2 + 22F GND 1 Note 4: The AZ1117I is compatible with low ESR ceramic capacitor. The ESR of the output capacitors must be less than 20Ω. A minimum of 10µF output capacitor is required. Functional Block Diagram 3 Thermal Protection INPUT + 2 OUTPUT For Adjustable Output, disconnect A1 and A2, connect B For Fixed Output, connect A1 and A2, disconnect B A1 A2 1 ADJ/GND B AZ1117I Document number: DS38213 Rev. 1 - 2 2 of 15 www.diodes.com December 2015 © Diodes Incorporated AZ1117I Absolute Maximum Ratings (Note 5) (@TA = +25°C, unless otherwise specified.) Symbol NEW PRODUCT Rating Input Voltage TJ Operating Junction Temperature Range TSTG Storage Temperature Range Unit 18 V +150 °C -65 to +150 °C θJA Thermal Resistance (Without Heatsink) SOT223 TO252-2 125 100 °C/W θJA Thermal Resistance (With Heatsink) (Note 6) SOT223 TO252-2 100 70 °C/W TLEAD Notes: Parameter VIN Lead Temperature (Soldering, 10sec) +260 °C 5. Stresses greater than those listed under ―Absolute Maximum Ratings‖ may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under ―Recommended Operating Conditions‖ is not implied. Exposure to ―Absolute Maximum Ratings‖ for extended periods may affect device reliability. 2 6. Chip is soldered to 100mm (10mm*10mm) copper (top side solder mask) on 2oz.2 layers FR-4 PCB with 8*0.5mm vias. Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.) Symbol Parameter VIN Input Voltage TJ Operating Junction Temperature Range Min Max Unit – 15 V -40 +125 °C Electrical Characteristics AZ1117I-ADJ (Operating Conditions: VIN = VOUT+2V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.) Symbol Parameter Conditions Min Typ Max Unit Reference Voltage 1.5V ≤ VIN-VOUT ≤ 10V VRLINE Line Regulation 1.5V ≤ VIN-VOUT ≤ 10V VRLOAD Load Regulation VIN = VOUT+2V Dropout Voltage ∆VREF = 1%, IOUT = 0.8A VREF VDROP 1.238 1.225 1.250 1.262 1.275 V — 1.250 0.001 — — 0.1 0.2 % — 0.4 1.0 % SOT223 — 1.2 1.3 V TO252-2 — 1.3 1.4 V 1mA ≤ IOUT ≤ 1A Current Limit — 1 1.35 — A — Adjust Pin Current — — 60 120 µA — Adjust Pin Current Change 1.5 ≤ (VIN-VOUT) ≤ 10V — 0.2 5 µA — Minimum Load Current 1.5 ≤ (VIN-VOUT) ≤ 10V — 1.7 5 mA Ripple Rejection f = 120Hz, COUT = 22µF (VIN-VOUT) = 3V, IOUT = 300mA — 70 — dB — Temperature Stability — — 0.5 — % — RMS Output Noise (% of VOUT) TA = +25°C, 10Hz ≤ f ≤ 10KHz — 0.003 — % — Thermal Shutdown Junction Temperature — +160 — °C — Thermal Shutdown Hysteresis — — +16 — °C ILIMIT PSRR θJC Thermal Resistance (Junction to Case) AZ1117I Document number: DS38213 Rev. 1 - 2 — SOT223 TO252-2 3 of 15 www.diodes.com — — — 15 10 — — °C/W December 2015 © Diodes Incorporated AZ1117I Electrical Characteristics AZ1117I-1.2 (Cont.) (Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.) Symbol Parameter Conditions Min Typ Max Unit 1.176 1.2 1.224 Output Voltage V VOUT 1.5V ≤ VIN-VOUT ≤ 10V 1.152 1.248 1.2 — 0.5 6 Line Regulation mV VRLINE 1.5V ≤ VIN-VOUT ≤ 10V 10 — — — 2 15 mV — — 1.2 1.3 1.3 1.4 V V — 1 1.35 — A IOUT = 0 — 4 6 mA Ripple Rejection f = 120Hz, COUT = 22µF (VIN-VOUT) = 3V, IOUT = 300mA — 70 — dB — — Temperature Stability — — 0.5 — % RMS Output Noise (% of VOUT) TA = +25°C, 10Hz ≤ f ≤ 10KHz — 0.003 — % — — Thermal Shutdown Thermal Shutdown Hysteresis Junction Temperature — +160 +16 Thermal Resistance (Junction to Case) SOT223 — — — — — °C °C θJC — — — — — NEW PRODUCT VRLOAD VDROP ILIMIT IQ PSRR Load Regulation VIN = VOUT+2V Dropout Voltage ∆VOUT = 1%, IOUT = 0.8A Current Limit Quiescent Current 1mA ≤ IOUT ≤ 1A SOT223 TO252-2 TO252-2 15 10 °C/W Electrical Characteristics AZ1117I-1.5 (Cont.) (Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.) Symbol Parameter Conditions Min Typ Max Unit 1.485 1.5 1.515 Output Voltage V VOUT 1.5V ≤ VIN-VOUT ≤ 10V 1.47 1.53 1.5 — 0.5 6 Line Regulation mV VRLINE 1.5V ≤ VIN-VOUT ≤ 10V 10 — — — 2 15 mV — — 1.2 1.3 1.3 1.4 V V — 1 1.35 — A Quiescent Current IOUT = 0 — 4 6 mA Ripple Rejection f = 120Hz, COUT = 22µF (VIN-VOUT) = 3V, IOUT = 300mA — 70 — dB — — Temperature Stability — — 0.5 — % RMS Output Noise (% of VOUT) TA = +25°C, 10Hz ≤ f ≤ 10KHz — 0.003 — % — — Thermal Shutdown Thermal Shutdown Hysteresis Junction Temperature — +160 +16 Thermal Resistance (Junction to Case) SOT223 — — — — — °C °C θJC — — — — — VRLOAD VDROP ILIMIT IQ PSRR Load Regulation VIN = VOUT+2V Dropout Voltage ∆VOUT = 1%, IOUT = 0.8A Current Limit AZ1117I Document number: DS38213 Rev. 1 - 2 1mA ≤ IOUT ≤ 1A SOT223 TO252-2 TO252-2 4 of 15 www.diodes.com 15 10 °C/W December 2015 © Diodes Incorporated AZ1117I Electrical Characteristics AZ1117I-1.8 (Cont.) (Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.) Symbol Parameter Conditions Min Typ Max Unit 1.782 1.8 1.818 Output Voltage V VOUT 1.5V ≤ VIN-VOUT ≤ 10V 1.764 1.836 1.8 — 0.5 6 Line Regulation mV VRLINE 1.5V ≤ VIN-VOUT ≤ 10V 10 — — — 2 15 mV — — 1.2 1.3 1.3 1.4 V V — 1 1.35 — A IOUT = 0 — 4 6 mA Ripple Rejection f = 120Hz, COUT = 22µF (VIN-VOUT) = 3V, IOUT = 300mA — 70 — dB — — Temperature Stability — — 0.5 — % RMS Output Noise (% of VOUT) TA = +25°C, 10Hz ≤ f ≤ 10KHz — 0.003 — % — — Thermal Shutdown Thermal Shutdown Hysteresis Junction Temperature — +160 +16 Thermal Resistance (Junction to Case) SOT223 — — — — — °C °C θJC — — — — — NEW PRODUCT VRLOAD VDROP ILIMIT IQ PSRR Load Regulation VIN = VOUT+2V Dropout Voltage ∆VOUT = 1%, IOUT = 0.8A Current Limit Quiescent Current 1mA ≤ IOUT ≤ 1A SOT223 TO252-2 TO252-2 15 10 °C/W Electrical Characteristics AZ1117I-2.5 (Cont.) (Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.) Symbol Parameter Conditions Min Typ Max Unit 2.475 2.5 2.525 Output Voltage V VOUT 1.5V ≤ VIN-VOUT ≤ 10V 2.455 2.5 2.545 — 0.5 6 Line Regulation mV VRLINE 1.5V ≤ VIN-VOUT ≤ 10V 10 — — — Load Regulation 2 15 mV VRLOAD VIN = VOUT+2V 1mA ≤ IOUT ≤ 1A — — 1.2 1.3 1.3 1.4 — 1 1.35 — A IOUT = 0 — 4 6 mA Ripple Rejection f = 120Hz, COUT = 22µF (VIN-VOUT) = 3V, IOUT = 300mA — 70 — dB — — Temperature Stability — — 0.5 — % RMS Output Noise (% of VOUT) TA = +25°C, 10Hz ≤ f ≤ 10KHz — 0.003 — % — — Thermal Shutdown Thermal Shutdown Hysteresis Junction Temperature — +160 +16 Thermal Resistance (Junction to Case) SOT223 — — — — — °C °C θJC — — — — — VDROP ILIMIT IQ PSRR Dropout Voltage ∆VOUT = 1%, IOUT = 0.8A Current Limit Quiescent Current AZ1117I Document number: DS38213 Rev. 1 - 2 SOT223 TO252-2 TO252-2 5 of 15 www.diodes.com 15 10 V V °C/W December 2015 © Diodes Incorporated AZ1117I Electrical Characteristics AZ1117I-3.3 (Cont.) NEW PRODUCT (Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.) Symbol Parameter Conditions Min Typ Max Unit 3.267 3.3 3.333 Output Voltage V VOUT 1.5V ≤ VIN-VOUT ≤ 10V 3.235 3.365 3.3 — 0.5 6 Line Regulation mV VRLINE 1.5V ≤ VIN-VOUT ≤ 10V 10 — — — Load Regulation 2 15 mV VRLOAD VIN = VOUT+2V 1mA ≤ IOUT ≤ 1A — — 1.2 1.3 1.3 1.4 — 1 1.35 — A IOUT = 0 — 4 6 mA Ripple Rejection f = 120Hz, COUT = 22µF (VIN-VOUT) = 3V, IOUT = 300mA — 70 — dB — — Temperature Stability — 0.003 — — % TA = +25ºC, 10Hz ≤ f ≤ 10KHz — — 0.5 RMS Output Noise (% of VOUT) — — Thermal Shutdown Thermal Shutdown Hysteresis Junction Temperature — °C °C θJC Thermal Resistance (Junction to Case) SOT223 — — — — — VDROP ILIMIT IQ PSRR Dropout Voltage ∆VOUT = 1%, IOUT = 0.8A Current Limit Quiescent Current SOT223 TO252-2 TO252-2 — — — — — +160 +16 15 10 V V % °C/W Electrical Characteristics AZ1117I-5.0 (Cont.) (Operating Conditions: VIN ≤ 10V, IOUT = 10mA, TJ = +25°C, unless otherwise specified. (P ≤ maximum power dissipation). Limits appearing in Boldface type apply over the entire junction temperature range for operation, -40°C to +125°C.) Symbol Parameter Conditions Min Typ Max Unit 4.950 5.0 5.050 Output Voltage V VOUT 1.5V ≤ VIN-VOUT ≤ 10V 4.900 5.100 5.0 — 0.5 6 Line Regulation mV VRLINE 1.5V ≤ VIN-VOUT ≤ 10V 10 — — — 2 15 mV — — 1.2 1.3 1.3 1.4 V V — 1 1.35 — A IOUT = 0 — 4 6 mA Ripple Rejection f = 120Hz, COUT = 22µF (VIN-VOUT) = 3V, IOUT = 300mA — 70 — dB — — Temperature Stability — — 0.5 — % RMS Output Noise (% of VOUT) TA = +25°C, 10Hz ≤ f ≤ 10KHz — 0.003 — % — — Thermal Shutdown Thermal Shutdown Hysteresis Junction Temperature — — — +160 +16 — — °C °C θJC Thermal Resistance (Junction to Case) SOT223 TO252-2 — 15 10 — VRLOAD VDROP ILIMIT IQ PSRR Load Regulation VIN = VOUT+2V Dropout Voltage ∆VOUT = 1%, IOUT = 0.8A Current Limit Quiescent Current AZ1117I Document number: DS38213 Rev. 1 - 2 1mA ≤ IOUT ≤ 1A SOT223 TO252-2 6 of 15 www.diodes.com — — °C/W December 2015 © Diodes Incorporated AZ1117I Performance Characteristics Line Regulation vs. Temperature Load Regulation vs. Temperature 10 IOUT=10mA 0.0 -0.2 AZ1117I-2.5V VIN=4.5V 5 Load Regulation (mV) Line Regulation (mV) AZ1117I-2.5V VIN=4.5V to 10V 0.2 IOUT=10mA to 800mA 0 -5 -10 -15 -20 -0.4 -25 -40 -20 0 20 40 60 80 100 -40 120 -20 0 o 20 40 60 80 120 Junction Temperature ( C) Reference Voltage vs. Temperature Output Voltage vs. Temperature 2.60 1.270 1.265 2.58 AZ1117I-ADJ VIN=4.5V 1.260 AZ1117I-2.5V VIN=4.5V 2.56 IOUT=10mA IOUT=10mA 2.54 1.255 Output Voltage (V) Reference Voltage (V) 100 o Junction Temperature ( C) 1.250 1.245 1.240 1.235 2.52 2.50 2.48 2.46 1.230 2.44 1.225 2.42 2.40 1.220 -40 -20 0 20 40 60 80 100 120 -40 -20 0 o 20 40 60 80 100 120 o Junction Temperature ( C) Junction Temperature ( C) Minimum Load Current vs. Temperature Adjust Pin Current vs. Temperature 100 3 AZ1117I-ADJ VIN=4.5V AZ1117I-ADJ VIN=4.5V 90 80 Adjust Pin Current (A) 2 Minimum Load Current (mA) NEW PRODUCT 0.4 1 0 70 60 50 40 30 20 -1 10 0 -2 -40 -20 0 20 40 60 80 100 -40 120 AZ1117I Document number: DS38213 Rev. 1 - 2 -20 0 20 40 60 80 100 120 o Junction Temperature ( C) o Junction Temperature ( C) 7 of 15 www.diodes.com December 2015 © Diodes Incorporated AZ1117I Performance Characteristics (Cont.) Dropout Voltage vs. Output Current Power Dissipation vs. Temperature 10 1.8 1.7 1.4 8 Power Dissipation (W) Dropout Voltage (V) NEW PRODUCT 1.5 AZ1117I-2.5V Package: SOT223 No Heat Sink 9 O -40 C O 0 C O +25 C O +85 C O +100 C 1.6 1.3 1.2 1.1 1.0 7 6 5 4 3 2 0.9 1 0.8 0.0 0.2 0.4 0.6 0.8 1.0 0 -40 Output Current (A) -20 0 20 40 60 80 100 120 o Case Temperature ( C) Line Transient Response Load Transient Response ∆VOUT (50mV/Div) ∆VOUT (0.1V/Div) D 0.2 0.1 0 -0.1 IOUT (0.5A/Div) VIN (0.5V/Div) 5.3 4.8 4.3 3.8 Time (20µ s/Div) Time (10µs/Div) PSRR vs. Frequency Current Limit vs. Temperature 2.0 80 1.8 70 1.6 1.4 Current Limit (A) PSRR (dB) 60 50 40 30 1.2 1.0 0.8 AZ1117I-2.5V VIN=4.5V 0.6 0.4 No Heat Sink @VOUT=VOUT(nom)x98% 20 0.2 Continuous Airflow 10scfm 10 0.0 10 100 1k 10k 100k AZ1117I Document number: DS38213 Rev. 1 - 2 -40 -20 0 20 40 60 80 100 120 o Frequency (Hz) Temperature ( C) 8 of 15 www.diodes.com December 2015 © Diodes Incorporated AZ1117I Performance Characteristics (Cont.) Dropout Voltage vs. Temperature 2.0 1.9 IOUT=0.1A Dropout Voltage (V) NEW PRODUCT 1.8 IOUT=0.5A 1.7 IOUT=0.8A 1.6 IOUT=1A 1.5 1.4 1.3 1.2 1.1 1.0 0.9 0.8 -40 -20 0 20 40 60 80 100 120 O Junction Temperature ( C) AZ1117I Document number: DS38213 Rev. 1 - 2 9 of 15 www.diodes.com December 2015 © Diodes Incorporated AZ1117I Ordering Information AZ1117I X - XX XX XX NEW PRODUCT Product Name Package Output Voltage Packing RoHS/Green H : SOT223 D : TO252-2 ADJ : Adjustable Output 1.2 : Fixed Output 1.2V 1.5 : Fixed Output 1.5V 1.8 : Fixed Output 1.8V 2.5 : Fixed Output 2.5V 3.3 : Fixed Output 3.3V 5.0 : Fixed Output 5.0V TR : Tape & Reel G1 : Green Package Temperature Range SOT223 -40°C to +125C TO252-2 Part Number Marking ID AZ1117IH-ADJTRG1 AZ1117IH-1.2TRG1 AZ1117IH-1.5TRG1 AZ1117IH-1.8TRG1 AZ1117IH-2.5TRG1 AZ1117IH-3.3TRG1 AZ1117IH-5.0TRG1 AZ1117ID-ADJTRG1 AZ1117ID-1.2TRG1 AZ1117ID-1.5TRG1 AZ1117ID-1.8TRG1 AZ1117ID-2.5TRG1 AZ1117ID-3.3TRG1 AZ1117ID-5.0TRG1 GH86J GH86K GH86L GH86M GH86N GH86P GH86Q AZ1117ID-ADJG1 AZ1117ID-1.2G1 AZ1117ID-1.5G1 AZ1117ID-1.8G1 AZ1117ID-2.5G1 AZ1117ID-3.3G1 AZ1117ID-5.0G1 Packing 4000/Tape & Reel 4000/Tape & Reel 4000/Tape & Reel 4000/Tape & Reel 4000/Tape & Reel 4000/Tape & Reel 4000/Tape & Reel 2500/Tape & Reel 2500/Tape & Reel 2500/Tape & Reel 2500/Tape & Reel 2500/Tape & Reel 2500/Tape & Reel 2500/Tape & Reel Marking Information (1) SOT223 (Top View) XXXXX YWWAXX (2) First Line: Logo and Marking ID (See Ordering Information) Second Line: Date Code Y: Year WW: Work Week of Molding A: Assembly House Code th th XX: 7 and 8 Digits of Batch Number TO252-2 (Top View) AZ1117ID -X.XG1 YWWAXX AZ1117I Document number: DS38213 Rev. 1 - 2 First and Second Lines: Logo and Marking ID (See Ordering Information) Third Line: Date Code Y: Year WW: Work Week of Molding A: Assembly House Code th th XX: 7 and 8 Digits of Batch Number 10 of 15 www.diodes.com December 2015 © Diodes Incorporated AZ1117I Package Outline Dimensions (All dimensions in mm.) (1) Package Type: SOT223 6.300(0.248) 6.700(0.264) 0.200(0.008) 4) 0.350(0.01 2.900(0.114) NEW PRODUCT 3.100(0.122) 0.850(0.033) 3.700(0.146) 3.300(0.130) 6.700(0.264) 7.300(0.287) MIN 0.250(0.010) 1.750(0.069) TYP 2.300(0.091) 0.600(0.024) TYP 0.810(0.032) 4.500(0.177) 0° 10° 4.700(0.185) 0.010(0.0004) 0.150(0.006) 1.500(0.059) 1.520(0.060) 1.700(0.067) 1.800(0.071) AZ1117I Document number: DS38213 Rev. 1 - 2 11 of 15 www.diodes.com December 2015 © Diodes Incorporated AZ1117I Package Outline Dimensions (All dimensions in mm.) (Cont.) (2) Package Type: TO252-2 (5) 0.880(0.035) 1.270(0.050) 6.450(0.254) 6.700(0.264) 2.190(0.086) 2.390(0.094) 5.210(0.205) 5.500(0.217) 0.450(0.018) 0.580(0.023) 9.400(0.370) 10.400(0.409) 6.000(0.236) 6.200(0.244) NEW PRODUCT 6° 8° 0.000(0.000) 0.130(0.005) 0.640(0.025) 1.020(0.040) 4.320(0.170) MIN AZ1117I Document number: DS38213 Rev. 1 - 2 0.508(0.020) 0° 10° 5.210(0.205) MIN 0.640(0.025) 0.880(0.035) 1.400(0.055) 1.780(0.070) 2.286(0.090) 2.740(0.108)REF 0.760(0.030) 1.140(0.045) 12 of 15 www.diodes.com December 2015 © Diodes Incorporated AZ1117I Suggested Pad Layout (1) Package Type: SOT223 Grid placement courtyard NEW PRODUCT X2 Y Z G X1 Y E1 E2 Dimensions Z (mm)/(inch) G (mm)/(inch) X1 (mm)/(inch) X2 (mm)/(inch) Y (mm)/(inch) E1 (mm)/(inch) E2 (mm)/(inch) Value 8.400/0.331 4.000/0.157 1.200/0.047 3.500/0.138 2.200/0.087 2.300/0.091 4.600/0.181 AZ1117I Document number: DS38213 Rev. 1 - 2 13 of 15 www.diodes.com December 2015 © Diodes Incorporated AZ1117I Suggested Pad Layout (Cont.) (2) Package Type: TO252-2 (5) NEW PRODUCT X2 Y2 Z G Y1 X1 E1 Dimensions Z (mm)/(inch) X1 (mm)/(inch) X2=Y2 (mm)/(inch) Y1 (mm)/(inch) G (mm)/(inch) E1 (mm)/(inch) Value 11.600/0.457 1.500/0.059 7.000/0.276 2.500/0.098 2.100/0.083 2.300/0.091 AZ1117I Document number: DS38213 Rev. 1 - 2 14 of 15 www.diodes.com December 2015 © Diodes Incorporated AZ1117I IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com AZ1117I Document number: DS38213 Rev. 1 - 2 15 of 15 www.diodes.com December 2015 © Diodes Incorporated