GP10A THRU GP10Y SINTERED GLASS PASSIVATED JUNCTION RECTIFIER Reverse Voltage - 50 to 1600 Volts ED T N E T PA Forward Current - 1.0 Ampere DO-204AL 1.0(25.4) MIN. FEATURES * * * * GPRC (Glass Passivated Rectifier Chip) inside Glass passivated cavity-free junction Capable of meeting environmental standards of MIL-S-19500 o o 1.0 Ampere operation at TA=75 C and 55 C with no thermal runaway * Typical IR less than 0.1uA o * High temperature soldering guaranteed: 260 C/10 seconds, 0.375" (9.5mm) lead length, 5lbs. (2.3 kg) tension * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 1.0(25.4) MIN. 0.205(5.20) 0.160(4.10) 0.107(2.70) 0.080(2.0) DIA. MECHANICAL DATA 0.034(0.86) 0.028(0.71) DIA. Case : JEDEC DO-204AL molded plastic over glass body Terminals : Plated axial leads , solderable per MIL-STD-750, Method 2026 Polarity : Color band denotes cathode end Mounting Position : Any Weight : 0.012 ounes , 0.3 gram *Dimensions in inches and (millimeters) TM MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS o Ratings at 25 C ambient temperature GP10 SYMBOLS unless otherwise specified. A B D G J K M UNITS N Q T V W Y Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 1100 1200 1300 1400 1500 1600 Volts Maximum RMS voltage VRMS 35 70 140 280 420 560 700 980 1050 1120 Volts VDC 50 100 200 400 600 800 1000 1100 1200 1300 1400 1500 1600 Volts Maximum DC blocking voltage 770 840 910 Maximum average forward rectified current I (AV) 1.0 Amps 0.375" (9.5mm) lead length (SEE FIG.1) Peak forward surge current 8.3ms single half sine-wave IFSM 30 25 Amps VF 1.0 1.25 Volts IR 5 30 50 5 50 - uA superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage at 1.0 A o Maximum DC reverse current at rated DC blocking voltage TA=25 C o TA=125 C o TA=150 C Typical junction capacitance (NOTE 1) Typical thermal resistance (NOTE 2) Operating junction and storage temperature range CJ R o 55 JA TJ,TSTG pF 10 -65 to +175 -55 to +150 C/W o C NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts (2) Thermal resistance from junction to ambient at 0.375" (9.5mm) lead lengths, P.C.B. mounted. REV. : 0 Zowie Technology Corporation RATINGS AND CHARACTERISTIC CURVES GP10A THRU GP10Y FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 1.0 RESISTIVE OR INDUCTIVE LOAD GP10A~GP10M GP10N~GP10Y 0.5 0.375" (9.5mm) LEAD LENGTH TJ=TJ max. 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 25 20 GP10A~GP10M 15 GP10N~GP10Y 10 5.0 0 0 25 50 75 100 125 150 1 175 10 AMBIENT TEMPERATURE, C FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 20.0 100 INSTANTANEOUS REVERSE LEAKAGE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT, AMPERES 100 NUMBER OF CYCLES AT 60Hz o 10.0 GP10A~GP10M 1.00 o TJ = 25 C PULSE WIDTH=300uS 1% DUTY CYCLE GP10N~GP10Y 0.01 10 1 o TJ=100 C o TJ=125 C 0.1 0 20 40 60 80 100 110 PERCENT OF RATED PEAK REVERSE VOLTAGE,% 0.01 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 1.6 INSTANTANEOUS FORWARD VOLTAGE, VOLTS FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, pF 200 o TJ = 25 C 100 60 40 20 10 6 4 2 1 .1 .2 .4 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, VOLTS REV. : 0 Zowie Technology Corporation