LUMINIS NT155 Cast aluminum enclosed driver housing Datasheet

NT145/NT150/NT155
SERIES
NAUTILUX - LED
Surface mount
TYPE:
QUANTITY:
PROJECT:
CATALOG
NUMBER:
FIXTURE
WATTAGE
VOLTAGE
FINISH
OPTION
OPTION
OPTION
OPTION
NT145
1
2
3
4
1234-
Cast aluminum enclosed driver housing.
Cast aluminum lens ring.
Silicone gasket with memory retention.
Heat dissipating fins with removable LED
platform.
5- Borosilicate frosted glass diffuser with
internal concentric prismatic pattern.
All stainless steel hardware.
NT150
HID max.
70W
5
NT155
MATERIALS
Nautilux is made of corrosion resistant 356 aluminum alloy with a copper (CU)
content of less than 0.1%.
LED platform is easily removable and secured with a heat dissipating plate for
optimal light performance.
LED light engine is positioned to increase down lighting while maintaining a
general diffused uniform light over the glass diffuser.
ELECTRICAL
LED
MOUNTING
Maximum weight: 10lbs (4.5kg)
Nautilux is designed as a wall surface mount luminaire. Mounts over a standard
4” (102) octagonal electrical box with 3 1/2” (89) C/C mounting holes.
CERTIFICATION
Tested to UL1598 and CSA 22.2 #250. ETL listed wet location.
Photometry tested per IES LM-79-08 / IES LM80 test report.
Rated IP65.
DRIVER Standard driver is 0-10V dimming-ready (dims to 10%) with: 120-277
LED
multi-volt compatibility (50-60Hz), minimum operating temperature
of -30ºC/-22ºF, output over voltage protection, output over current
protection, output short circuit protection with auto-recovery, and
over temperature protection (110ºC).
Standard 4000K LED platform included. Optional 3000K and 3500K
available. Removable modular LED platform.
LIFE
9.85”
(250)
51,000hrs L77B50 (based on IESNA TM-21 Test Method and LM-80 data).
68,000hrs L70B50 (calculated projection from LM-80 data).
LUMINIS
NT145
Frosted diffuser
with cast aluminum
cross cage
Toll free: 866.586.4647 Fax: 514.683.8872
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
NT150
Frosted diffuser
with cast aluminum
eyelid
NT155
Frosted diffuser
6.5”
(165)
Jan 2018
Five-stage preparation process includes preheating of cast aluminum
parts for air extraction. Polyester powder coating is applied through an
electrostatic process, and oven cured for long term finish.
Rev 0
FINISH
NT155: 6” (152)
LUMINIS.COM
1
NT145/NT150/NT155
SERIES
NAUTILUX - LED
TYPICAL PHOTOMETRY SUMMARY
Descriptive Information
NT150-L1W30r1
Total Lms: 1604 Lumens
Total Input Watts: 34.4 W
Source: LED
Efficacy: 47 Lumens/Watt
BUG: B0-U3-G1
CCT/CRI: 4000K/80
Maximum Candela: 1012 @ 30 deg V
1012
759
506
Please visit our web site www.luminis.com for complete I.E.S. formatted download data.
LUMINAIRE SELECTION
MODEL#
LED LIGHT SELECTION
SUFFIX
L1W12
L1W18
L1W30
NT145
VOLTAGE
INPUT
WATTS
DELIVERED
LUMENS
13W
23W
34W
646
1114
1604
1
FINISH
STANDARD COLORS
CRI
CCT K
80
4000K
120V
277V
WHT
BKT
BZT
MST
GRT
DGT
CHT
Snow white
Jet black
Bronze
Matte silver
Titanium gray
Gun metal
Champagne
OPTIONAL COLORS
NT150
CS
Custom color
RAL RAL# color
(Refer to color chart)
NT155
OPTIONS
ACCESSORIES
ELECTRICAL
FS
PH
Fuse2
Photocell2
SWK
Surface mount connection box
(Single luminaire connection. 1” extension)
Jan 2018
NOTES
1- If no voltage is specified, luminaires are factory prewired by default for 120V. For other voltages, please specify with catalog number, or consult
factory.
2- Fuse and photocell options are normally installed with poles when specified with Luminis luminaires (except for other mounting types).
Rev 0
Alternate CCT K LED
K3
3000K CCT LED
K35
3500K CCT LED
LUMINIS
Toll free: 866.586.4647 Fax: 514.683.8872
260 Labrosse, Pointe-Claire (QC) Canada H9R 5L5
Luminaires may be altered for design improvement or discontinued without prior notice.
LUMINIS.COM
2
Similar pages