EIC GR1A Glass passivated junction Datasheet

GR1A - GR1M
GLASS PASSIVATED JUNCTION
FAST RECOVERY RECTIFIERS
PRV : 50 - 1000 Volts
Io : 1.0 Ampere
SMA (DO-214AC)
Glass passivated chip
High current capability
High reliability
Low reverse current
Low forward voltage drop
Fast switching for high efficiency
Pb / RoHS Free
0.2 ± 0.07
1.2 ± 0.2
2.1 ± 0.2
2.6 ± 0.15
2.0 ± 0.2
MECHANICAL DATA :
*
*
*
*
*
*
1.1 ± 0.3
4.5 ± 0.15
*
*
*
*
*
*
*
5.0 ± 0.15
FEATURES :
Case : SMA Molded plastic
Epoxy : UL94V-O rate flame retardant
Lead : Lead Formed for Surface Mount
Polarity : Color band denotes cathode end
Mounting position : Any
Weight : 0.067 gram
Dimensions in millimeter
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25 °C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RATING
SYMBOL
GR1A
GR1B
GR1D
GR1G
GR1J
GR1K
GR1M
UNIT
Maximum Recurrent Peak Reverse Voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS Voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC Blocking Voltage
VDC
50
100
200
400
600
800
1000
V
Ta = 55 °C
Maximum Average Forward Current
Peak Forward Surge Current,
8.3ms Single half sine wave superimposed
on rated load (JEDEC Method)
IF(AV)
1.0
A
IFSM
35
A
VF
1.3
V
IR
5
150
µA
µA
Maximum Peak Forward Voltage at IF = 1.0 A
Maximum DC Reverse Current
at Rated DC Blocking Voltage
Ta = 25 °C
Ta = 125 °C
IR(H)
Maximum Reverse Recovery Time ( Note 1 )
Trr
Typical Junction Capacitance ( Note 2 )
CJ
150
15
250
500
ns
pf
Junction Temperature Range
TJ
- 65 to + 150
°C
Storage Temperature Range
TSTG
- 65 to + 150
°C
Notes :
( 1 ) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A.
( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC
Page 1 of 2
Rev. 02 : March 24, 2005
RATING AND CHARACTERISTIC CURVES ( GR1A - GR1M )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
50 Ω
Trr
10 Ω
+ 0.5
D.U.T.
+
0
PULSE
GENERATOR
( NOTE 2 )
50 Vdc
(approx)
1Ω
- 0.25
OSCILLOSCOPE
( NOTE 1 )
- 1.0 A
SET TIME BASE FOR 50/100 ns/cm
NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF.
1 cm
2. Rise time = 10 ns max., Source Impedance = 50 ohms.
3. All Resistors = Non-inductive Types.
FIG.2 - DERATING CURVE FOR OUTPUT
RECTIFIED CURRENT
FIG.3 - MAXIMUM NON-REPETITIVE PEAK
FORWARD SURGE CURRENT
30
8.3 ms SINGLE HALF SINE WAVE
PEAK FORWARD SURGE
CURRENT, AMPERES
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
1.0
0.8
0.6
0.4
0.2
24
Ta = 50 °C
18
12
6
60Hz RESISTIVE OR INDUCTIVE LOAD
0
0
25
50
75
100
125
150
0
175
1
AMBIENT TEMPERATURE, ( °C)
2
4
6
10
20
40
60 100
NUMBER OF CYCLES AT 60Hz
FIG.4 - TYPICAL FORWARD CHARACTERISTICS
FIG.5 - TYPICAL REVERSE CHARACTERISTICS
10
Pulse Width = 300 µs
2% Duty Cycle
TJ = 100 °C
REVERSE CURRENT,
MICROAMPERES
FORWARD CURRENT, AMPERES
20
10
TJ = 25 °C
1.0
0.1
0.1
TJ = 25 °C
0.01
0.01
0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
1.6
FORWARD VOLTAGE, VOLTS
Page 2 of 2
1.0
1.8
2.0
0
20
40
60
80
100
120
140
PERCENT OF RATED REVERSE
VOLTAGE, (%)
Rev. 02 : March 24, 2005
Similar pages