AD AD8613AKSZ-REEL7 Low cost micropower, low noise cmos rail-to- rail, input/output operational amplifier Datasheet

Low Cost Micropower, Low Noise CMOS Rail-toRail, Input/Output Operational Amplifiers
AD8613/AD8617/AD8619
GENERAL DESCRIPTION
The AD8613/AD8617/AD8619 are single, dual, and quad
micropower, rail-to-rail input and output amplifiers that feature
low supply current, low input voltage, and low current noise.
The parts are fully specified to operate from 1.8 V to 5.0 V
single supply, or ±0.9 V and ±2.5 V dual supply. The combination
of low noise, very low input bias currents, and low power
consumption make the AD8613/AD8617/AD8619 especially
useful in portable and loop-powered instrumentation.
The ability to swing rail-to-rail at both the input and output
enables designers to buffer CMOS ADCs, DACs, ASICs, and
other wide output swing devices in low power, single-supply
systems.
The AD8613 is available in a 5-lead SC70 package and a 5-lead
TSOT-23 package. The AD8617 is available in 8-lead MSOP
and 8-lead SOIC packages. The AD8619 is available in 14-lead
TSSOP and 14-lead SOIC packages.
AD8613
2
+IN
3
TOP VIEW
(Not to Scale)
5
V+
4
–IN
05622-037
1
V–
Figure 1. 5-Lead SC70 and 5-Lead TSOT-23
OUT A 1
–IN A 2
AD8617
+IN A 3
TOP VIEW
(Not to Scale)
V– 4
8
V+
7
OUT B
6
–IN B
5
+IN B
05622-001
Battery-powered instrumentation
Multipole filters
Current shunt sense
Sensors
ADC predrivers
DAC drivers/level shifters
Low power ASIC input or output amplifiers
OUT
Figure 2. 8-Lead MSOP
OUT A 1
–IN A 2
AD8617
+IN A 3
TOP VIEW
V– 4 (Not to Scale)
8
V+
7
OUT B
6
–IN B
5
+IN B
05622-002
APPLICATIONS
PIN CONFIGURATIONS
Figure 3. 8-Lead SOIC_N
OUT A
1
14 OUT D
–IN A
2
13
+IN A
3
AD8619
V+
4
TOP VIEW
(Not to Scale)
+IN B
5
10
+IN C
–IN B
6
9
–IN C
OUT B
7
8
OUT C
–IN D
12 +IN D
11 V–
05622-035
Offset voltage: 2.2 mV max
Low input bias current: 1 pA max
Single-supply operation: 1.8 V to 5 V
Low noise: 22 nV/√Hz
Micropower: 38 μA
No phase reversal
Unity gain stable
Figure 4. 14-Lead TSSOP
OUT A 1
14
OUT D
–IN A 2
13
–IN D
12
+IN D
+IN A 3
AD8619
TOP VIEW
11 V–
(Not to Scale)
+IN B 5
10 +IN C
V+ 4
–IN B 6
9
–IN C
OUT B 7
8
OUT C
05622-036
FEATURES
Figure 5. 14-Lead SOIC_N
Rev. B
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113
©2006 Analog Devices, Inc. All rights reserved.
AD8613/AD8617/AD8619
TABLE OF CONTENTS
Features .............................................................................................. 1
Thermal Resistance .......................................................................5
Applications....................................................................................... 1
ESD Caution...................................................................................5
General Description ......................................................................... 1
Typical Performance Characteristics ..............................................6
Pin Configurations ........................................................................... 1
Outline Dimensions ....................................................................... 12
Revision History ............................................................................... 2
Ordering Guide .......................................................................... 13
Specifications..................................................................................... 3
Absolute Maximum Ratings............................................................ 5
REVISION HISTORY
1/06—Rev. A to Rev. B
Added AD8613 ...................................................................Universal
Changes to Features.......................................................................... 1
Changes to Table 1............................................................................ 3
Changes to Table 2............................................................................ 4
Updated Outline Dimensions ....................................................... 12
Changes to Ordering Guide .......................................................... 13
10/05—Rev. 0 to Rev. A
Added AD8619 ...................................................................Universal
Change to Specifications Section ....................................................3
Updated Outline Dimensions....................................................... 12
Changes to Ordering Guide .......................................................... 13
9/05—Revision 0: Initial Version
Rev. B | Page 2 of 16
AD8613/AD8617/AD8619
SPECIFICATIONS
Electrical characteristics @ VS = 5 V, VCM = VS/2, TA = 25°C, unless otherwise noted.
Table 1.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Conditions
VOS
Offset Voltage Drift
AD8613
Input Bias Current
∆VOS/∆T
−0.3 V < VCM < +5.3 V
−40°C < TA < +125°C, −0.3 V < VCM < +5.2 V
−40°C < TA < +125°C
Min
Typ
Max
Unit
0.4
2.2
2.2
4.5
7.0
1
110
780
0.5
50
250
mV
mV
μV/°C
μV/°C
pA
pA
pA
pA
pA
pA
dB
dB
V/mV
pF
pF
1
2.5
0.2
IB
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Offset Current
Common-Mode Rejection Ratio
Large Signal Voltage Gain
Input Capacitance
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current/Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Settling Time 0.1%
Gain Bandwidth Product
IOS
CMRR
AVO
CDIFF
CCM
VOH
VOL
ISC
ZOUT
PSRR
ISY
SR
tS
GBP
Phase Margin
NOISE PERFORMANCE
Peak-to-Peak Noise
Voltage Noise Density
ØO
en
Current Noise Density
in
0.1
−40°C < TA < +85°C
−40°C < TA < +125°C
0 V < VCM < 5 V
−40°C < TA < +125°C
RL = 10 kΩ, 0.5 V < VO < 4.5 V
IL = 1 mA
−40°C to +125°C
IL = 10 mA
−40°C to +125°C
IL = 1 mA
−40°C to +125°C
IL = 10 mA
−40°C to +125°C
95
68
235
4.95
4.9
4.98
4.7
4.50
20
190
67
64
94
38
50
RL = 10 kΩ
G = ±1, 2 V step, CL = 20 pF, RL = 1 kΩ
RL = 100 kΩ
RL = 10 kΩ
RL = 10 kΩ, RL = 100 kΩ, CL = 20 pF
0.1
23
400
350
70
f = 1 kHz
f = 10 kHz
f = 1 kHz
2.3
25
22
0.05
Rev. B | Page 3 of 16
30
50
275
335
±80
15
f = 10 kHz, AV = 1
1.8 V < VS < 5 V
−40°C < TA < +125°C
VO = VS/2
−40°C <TA < +125°C
500
1.9
2.5
V
V
V
V
mV
mV
mV
mV
mA
Ω
dB
dB
μA
μA
V/μs
μs
kHz
kHz
Degrees
3.5
μV
nV/√Hz
nV/√Hz
pA/√Hz
AD8613/AD8617/AD8619
Electrical characteristics @ VS = 1.8 V, VCM = VS/2, TA = 25°C, unless otherwise noted.
Table 2.
Parameter
INPUT CHARACTERISTICS
Offset Voltage
Symbol
Conditions
VOS
Offset Voltage Drift
AD8613
Input Bias Current
∆VOS/∆T
−0.3 V < VCM < +1.9 V
−0.3 V < VCM < +1.8 V; −40°C < TA < +125°C
−40°C < TA < +125°C
Min
Typ
Max
Unit
0.4
2.2
2.2
8.5
9.0
1
110
780
0.5
50
250
mV
mV
μV/°C
μV/°C
pA
pA
pA
pA
pA
pA
dB
dB
V/mV
pF
pF
1
3.7
0.2
IB
−40°C < TA < +85°C
−40°C < TA < +125°C
Input Offset Current
IOS
58
55
85
VOH
IL = 1 mA
−40°C to +125°C
1.65
1.6
VOL
IL = 1 mA
−40°C to +125°C
Common-Mode Rejection Ratio
CMRR
Large Signal Voltage Gain
Input Capacitance
AVO
CDIFF
CCM
OUTPUT CHARACTERISTICS
Output Voltage High
Output Voltage Low
Short-Circuit Current
Closed-Loop Output Impedance
POWER SUPPLY
Power Supply Rejection Ratio
Supply Current/Amplifier
DYNAMIC PERFORMANCE
Slew Rate
Settling Time 0.1%
Gain Bandwidth Product
0.1
−40°C < TA < +85°C
−40°C < TA < +125°C
0 V < VCM < 1.8 V
−40°C < TA < +125°C
RL = 10 kΩ, 0.5 V < VO < 1.3 V
ISC
ZOUT
PSRR
ISY
SR
tS
GBP
Phase Margin
NOISE PERFORMANCE
Peak-to-Peak Noise
Voltage Noise Density
ØO
en
Current Noise Density
in
1000
2.1
3.8
1.73
44
67
60
80
94
38
50
RL = 10 kΩ
G = ±1, 1 V step, CL = 20 pF, RL = 1 kΩ
RL = 100 kΩ
RL = 10 kΩ
RL = 10 kΩ, RL = 100 kΩ, CL = 20 pF
0.1
6.5
400
350
70
f = 1 kHz
f = 10 kHz
f = 1 kHz
2.3
25
22
0.05
Rev. B | Page 4 of 16
V
V
±7
15
f = 10 kHz, AV = 1
1.8 V < VS < 5 V
VO = VS/2
−40°C <TA < +125°C
86
mV
mV
mA
Ω
dB
μA
μA
V/μs
μs
kHz
kHz
Degrees
3.5
μV
nV/√Hz
nV/√Hz
pA/√Hz
AD8613/AD8617/AD8619
ABSOLUTE MAXIMUM RATINGS
TA = 25°C, unless otherwise noted.
Table 3.
Parameter
Supply Voltage
Input Voltage
Differential Input Voltage
Output Short-Circuit Duration to GND
Storage Temperature Range
Lead Temperature (Soldering, 60 sec)
Operating Temperature Range
Junction Temperature Range
Rating
6V
VSS − 0.3 V to VDD + 0.3 V
±6 V
Observe derating curve
−65°C to +150°C
300°C
−40°C to +125°C
−65°C to +150°C
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only; functional operation of the device at these or any
other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Absolute maximum ratings apply at 25°C, unless otherwise
noted.
THERMAL RESISTANCE
θJA is specified for the worst-case conditions, that is, a device
soldered in a circuit board for surface-mount packages.
Table 4. Thermal Characteristics
Package Type
5-Lead TSOT-23 (UJ-5)
5-Lead SC70 (KS-5)
8-Lead MSOP (RM-8)
8-Lead SOIC_N (R-8)
14-Lead SOIC_N (R-14)
14-Lead TSSOP (RU-14)
θJA
207
376
210
158
120
180
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. B | Page 5 of 16
θJC
61
126
45
43
36
35
Unit
°C/W
°C/W
°C/W
°C/W
°C/W
°C/W
AD8613/AD8617/AD8619
TYPICAL PERFORMANCE CHARACTERISTICS
VSY = 5 V or ±2.5 V, unless otherwise noted.
1800
400
VSY = 5V AND 1.8V
350
1400
INPUT BIAS CURRENT (pA)
1200
1000
800
600
400
200
150
100
0
25
1900
1600
1300
1000
700
400
100
–200
–500
–800
–1100
–1400
–1700
–2000
0
250
50
05622-003
200
300
05622-006
NUMBER OF AMPLIFIERS
VSY = 5.5V
–0.5V < V
< +5.5V
1600 T = 25°CCM
A
50
75
100
125
150
TEMPERATURE (°C)
INPUT OFFSET VOLTAGE (μV)
Figure 9. Input Bias Current vs. Temperature
Figure 6. Input Offset Voltage Distribution
40
50
–40°C < TA < 125°C
VCM = 2.5V
35
TA = 25°C
NUMBER OF AMPLIFIERS
40
30
25
30
20
20
15
10
05622-004
0
0
1
2
3
4
5
6
7
8
9
05622-007
10
5
0
0
10
1
TCVOS (μV/°C)
Figure 7. Input Offset Voltage Drift Distribution
50
SUPPLY CURRENT/AMPLIFIER (μA)
1000
500
0
–500
–1000
–1500
05622-005
INPUT OFFSET VOLTAGE (μV)
1500
0.5
1.0
1.5
2.0
2.5
3.0
5
4
Figure 10. Supply Current vs. Supply Voltage
VSY = 5V
TA = 25°C
0
3
3.5
4.0
4.5
5.0
VSY = ±2.5V, ±1.35V, ±0.9V
40
30
20
10
0
–40
5.5
INPUT COMMON-MODE VOLTAGE (V)
05622-008
2000
–2000
–0.5
2
SUPPLY VOLTAGE (V)
–10
20
50
80
TEMPERATURE (°C)
Figure 8. Input Offset Voltage vs. Input Common-Mode Voltage
Figure 11. Supply Current vs. Temperature
Rev. B | Page 6 of 16
110
AD8613/AD8617/AD8619
VSY – VOH
1
SINK
30
20
0.01
0.001
0.01
φM
0
0
0.1
VSY = ±2.5V AND ±0.9V
RL = 100kΩ
CL = 20pF
–10
–20
1k
10
1
10k
120
VSY = 5V AND 2.7V
TA = 25°C
100
30
VSY – VOH @ 1mA
CMRR (dB)
80
20
VOL @ 1mA
60
40
10
–25
–10
5
20
35
50
65
80
95
110
0
100
125
05622-013
20
05622-010
OUTPUT SATURATION VOLTAGE (mV)
Figure 15. Open-Loop Gain and Phase vs. Frequency
VSY = 5V
0
–40
1k
Figure 13. Output Saturation Voltage vs. Temperature
(IL = 1 mA)
350
10k
100k
1M
FREQUENCY (Hz)
TEMPERATURE (°C)
Figure 16. CMRR vs. Frequency
120
VSY = 5V
VSY = ±2.5V AND ±1.35V
TA = 25°C
300
100
VDD – VOH @ 10mA
250
PSRR (dB)
80
200
VOL @ 10mA
150
60
40
100
0
–40
–25
–10
5
20
35
50
65
80
95
110
0
100
125
TEMPERATURE (°C)
05622-014
20
50
05622-011
OUTPUT SATURATION VOLTAGE (mV)
–45
1M
100k
FREQUENCY (Hz)
LOAD CURRENT (mA)
Figure 12. Output Saturation Voltage vs. Load Current
40
45
10
VOL
0.1
90
40
OPEN-LOOP GAIN (dB)
SOURCE
10
OPEN-LOOP PHASE SHIFT (Degrees)
50
100
1k
10k
100k
FREQUENCY (Hz)
Figure 14. Output Saturation Voltage vs. Temperature
(IL = 10 mA)
Figure 17. PSRR vs. Frequency
Rev. B | Page 7 of 16
1M
05622-012
VSY = 5V
TA = 25ºC
05622-009
OUTPUT SATURATION VOLTAGE (mV)
135
60
1k
AD8613/AD8617/AD8619
1k
VSY = 5V
AV = 1
RL = 10kΩ
CL = 200pF
AV = 100
VOLTAGE (1V/DIV)
OUTPUT IMPEDANCE (Ω)
100
AV = 10
AV = 1
10
05622-015
VSY = 5V AND 1.8V
0
100
1k
10k
100k
05622-018
1
TIME (20μs/DIV)
1M
FREQUENCY (Hz)
Figure 21. Large Signal Transient Response
Figure 18. Closed-Loop Output Impedance vs. Frequency
50
0
VOUT (V)
SMALL SIGNAL OVERSHOOT (%)
VSY = 5V
45 TA = 25°C
40
35
VSY = ±2.5V
AV = –50
–2.5
30
–OS
25
20
VIN (mV)
100
15
+OS
0
05622-016
5
0
10
100
05622-019
10
TIME (20μs/DIV)
1000
LOAD CAPACITANCE (pF)
Figure 22. Positive Overload Recovery
Figure 19. Small Signal Overshoot vs. Load Capacitance
VSY = 5V, 2.7V, 1.8V
AV = 1
RL = 10kΩ
CL = 200pF
VSY = ±2.5V
AV = –50
VOLTAGE (50mV/DIV)
VOUT (V)
2.5
0
VIN (mV)
0
05622-020
05622-017
–100
TIME (20μs/DIV)
TIME (4μs/DIV)
Figure 20. Small Signal Transient Response
Figure 23. Negative Overload Recovery
Rev. B | Page 8 of 16
AD8613/AD8617/AD8619
1000
VIN
VOLTAGE (1V/DIV)
VOUT
05622-021
VSY = ±2.5V
AV = 1
RL = 10kΩ
VIN = 6V p-p
100
10
1/F CORNER @ 100Hz
05622-023
INPUT VOLTAGE NOISE (nV/√Hz)
VSY = 5V
TA = 25ºC
1
TIME (20μs/DIV)
1
10
100
1000
10000
FREQUENCY (Hz)
Figure 26. Voltage Noise Density
Figure 24. No Phase Reversal
140
VSY = 5V AND 2.7V
VSY = 5V
VOLTAGE NOISE (1μV/DIV)
CHANNEL SEPARATION (dB)
120
100
80
60
40
0
100
TIME (1s/DIV)
05622-024
05622-022
20
1k
10k
100k
FREQUENCY (Hz)
Figure 27. Channel Separation
Figure 25. 0.1 Hz to 10 Hz Input Voltage Noise
Rev. B | Page 9 of 16
1M
AD8613/AD8617/AD8619
VS = 1.8 V or ±0.9 V, unless otherwise noted.
450
80
VSY = 1.8V
350
300
250
200
150
05622-025
100
50
VOH @ 1mA
20
–25
–10
5
20
50
65
80
95
110
125
Figure 31. Output Saturation Voltage vs. Temperature
(IL = 1 mA)
100
VSY = 1.8V
TA = 25°C
VSY = 1.8V
TA = 25°C
80
1000
CMRR (dB)
500
0
–500
60
40
–1000
05622-026
–2000
–0.5
–0.2
0.1
0.4
0.7
1.0
1.3
1.6
1.9
0
100
2.2
05622-029
20
–1500
1k
10k
INPUT COMMON-MODE VOLTAGE (V)
100k
1M
FREQUENCY (Hz)
Figure 32. CMRR vs. Frequency
Figure 29. Input Offset Voltage vs. Input Common-Mode Voltage
1000
120
VSY = 1.8V
TA = 25ºC
VSY = 1.8V
TA = 25°C
100
100
VSY–VOH
80
PSRR (dB)
SOURCE
10
1
SINK
60
40
VOL
0.1
0.01
0.1
1
0
100
10
LOAD CURRENT (mA)
05622-030
0.01
0.001
20
05622-027
OUTPUT SATURATION VOLTAGE (mV)
35
INPUT OFFSET VOLTAGE (μV)
2000
INPUT OFFSET VOLTAGE (μV)
40
TEMPERATURE (°C)
Figure 28. Input Offset Voltage Distribution
1500
VSY–VOH @ 1mA
0
–40
1900
1600
1300
1000
700
400
100
–200
–500
–800
–1100
–1400
–1700
–2000
0
60
05622-028
OUTPUT SATURATION VOLTAGE (mV)
NUMBER OF AMPLIFIERS
VSY = 1.8V
400 0V < VCM < 1.8V
TA = 25°C
1k
10k
FREQUENCY (Hz)
Figure 30. Output Saturation Voltage vs. Load Current
Figure 33. PSRR vs. Frequency
Rev. B | Page 10 of 16
1M
AD8613/AD8617/AD8619
SMALL SIGNAL OVERSHOOT (%)
40
VSY = 1.8V
VSY = 1.8V
TA = 25°C
VOLTAGE (1μV/DIV)
30
–OS
20
05622-031
05622-033
+OS
10
0
10
100
TIME (1s/DIV)
1k
LOAD CAPACITANCE (pF)
Figure 34. Small Signal Overshoot vs. Load Capacitance
Figure 36. 0.1 Hz to 10 Hz Input Voltage Noise
1k
VSY = 1.8V
AV = 1
RL = 10kΩ
CL = 200pF
100
1/F CORNER @ 100Hz
10
05622-034
05622-032
VOLTAGE (500mV/DIV)
INPUT VOLTAGE NOISE (nV/√Hz)
VSY = 1.8V
TA = 25°C
1
TIME (20μs/DIV)
1
10
100
1k
FREQUENCY (Hz)
Figure 35. Large Signal Transient Response
Figure 37. Voltage Noise Density
Rev. B | Page 11 of 16
10k
AD8613/AD8617/AD8619
OUTLINE DIMENSIONS
3.20
3.00
2.80
8
3.20
3.00
2.80
5.00 (0.1968)
4.80 (0.1890)
1
8
5.15
4.90
4.65
5
1.27 (0.0500)
BSC
0.65 BSC
0.95
0.85
0.75
0.25 (0.0098)
0.10 (0.0040)
1.10 MAX
0.38
0.22
Figure 40. 8-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-8)
Dimensions shown in millimeters and (inches)
Figure 38. 8-Lead Mini Small Outline Package [MSOP]
(RM-8)
Dimensions shown in millimeters
5.10
5.00
4.90
8.75 (0.3445)
8.55 (0.3366)
COPLANARITY
0.10
8°
0.25 (0.0098) 0° 1.27 (0.0500)
0.40 (0.0157)
0.17 (0.0067)
COMPLIANT TO JEDEC STANDARDS MS-012-AA
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
SEATING
PLANE
COMPLIANT TO JEDEC STANDARDS MO-187-AA
0.25 (0.0098)
0.10 (0.0039)
0.50 (0.0196)
× 45°
0.25 (0.0099)
1.75 (0.0688)
1.35 (0.0532)
0.51 (0.0201)
COPLANARITY
SEATING 0.31 (0.0122)
0.10
PLANE
0.80
0.60
0.40
8°
0°
0.23
0.08
COPLANARITY
0.10
4.00 (0.1575)
3.80 (0.1496)
6.20 (0.2440)
4 5.80 (0.2284)
4
PIN 1
0.15
0.00
5
4.00 (0.1574)
3.80 (0.1497) 1
14
8
1
7
1.27 (0.0500)
BSC
14
6.20 (0.2441)
5.80 (0.2283)
1.75 (0.0689)
1.35 (0.0531)
8
4.50
4.40
4.30
0.50 (0.0197)
× 45°
0.25 (0.0098)
6.40
BSC
1
7
PIN 1
0.51 (0.0201)
0.31 (0.0122)
SEATING
PLANE
8°
0.25 (0.0098) 0° 1.27 (0.0500)
0.40 (0.0157)
0.17 (0.0067)
1.05
1.00
0.80
COMPLIANT TO JEDEC STANDARDS MS-012-AB
CONTROLLING DIMENSIONS ARE IN MILLIMETERS; INCH DIMENSIONS
(IN PARENTHESES) ARE ROUNDED-OFF MILLIMETER EQUIVALENTS FOR
REFERENCE ONLY AND ARE NOT APPROPRIATE FOR USE IN DESIGN.
Figure 39. 14-Lead Standard Small Outline Package [SOIC_N]
Narrow Body (R-14)
Dimensions shown in millimeters and (inches)
0.65
BSC
1.20
MAX
0.15
0.05
0.30
0.19
0.20
0.09
SEATING
COPLANARITY
PLANE
0.10
8°
0°
COMPLIANT TO JEDEC STANDARDS MO-153-AB-1
Figure 41. 14-Lead Thin Shrink Small Outline Package [TSSOP]
(RU-14)
Dimensions shown in millimeters
Rev. B | Page 12 of 16
0.75
0.60
0.45
AD8613/AD8617/AD8619
2.90 BSC
2.20
2.00
1.80
1.35
1.25
1.15
5
1
5
4
2
3
2.80 BSC
1
2.40
2.10
1.80
0.30
0.15
SEATING
PLANE
3
0.95 BSC
1.90
BSC
*0.90
0.87
0.84
0.65 BSC
1.10
0.80
2
PIN 1
PIN 1
1.00
0.90
0.70
0.10 MAX
4
1.60 BSC
0.40
0.10
*1.00 MAX
0.22
0.08
0.46
0.36
0.26
0.10 MAX
0.50
0.30
0.20
0.08
SEATING
PLANE
8°
4°
0°
0.10 COPLANARITY
0.60
0.45
0.30
COMPLIANT TO JEDEC STANDARDS MO-203-AA
*COMPLIANT TO JEDEC STANDARDS MO-193-AB WITH
THE EXCEPTION OF PACKAGE HEIGHT AND THICKNESS.
Figure 42. 5-Lead Thin Shrink Small Outline Transistor Package [SC70]
(KS-5)
Dimensions shown in millimeters
Figure 43. 5-Lead Thin Small Outline Transistor Package [TSOT-23]
(UJ-5)
Dimensions shown in millimeters
ORDERING GUIDE
Model
AD8613AKSZ-R2 1
AD8613AKSZ-REEL1
AD8613AKSZ-REEL71
AD8613AUJZ-R21
AD8613AUJZ-REEL1
AD8613AUJZ-REEL71
AD8617ARMZ-R21
AD8617ARMZ-REEL1
AD8617ARZ1
AD8617ARZ-REEL1
AD8617ARZ-REEL71
AD8619ARUZ1
AD8619ARUZ-REEL1
AD8619ARZ1
AD8619ARZ-REEL1
AD8619ARZ-REEL71
1
Temperature Range
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
−40°C to +125°C
Package Description
5-Lead SC70
5-Lead SC70
5-Lead SC70
5-Lead TSOT-23
5-Lead TSOT-23
5-Lead TSOT-23
8-Lead MSOP
8-Lead MSOP
8-Lead SOIC_N
8-Lead SOIC_N
8-Lead SOIC_N
14-Lead TSSOP
14-Lead TSSOP
14-Lead SOIC_N
14-Lead SOIC_N
14-Lead SOIC_N
Z = Pb-free part.
Rev. B | Page 13 of 16
Package Option
KS-5
KS-5
KS-5
UJ-5
UJ-5
UJ-5
RM-8
RM-8
R-8
R-8
R-8
RU-14
RU-14
R-14
R-14
R-14
Branding
A0Y
A0Y
A0Y
A0Y
A0Y
A0Y
A0T
A0T
AD8613/AD8617/AD8619
NOTES
Rev. B | Page 14 of 16
AD8613/AD8617/AD8619
NOTES
Rev. B | Page 15 of 16
AD8613/AD8617/AD8619
NOTES
©2006 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D05622-0-1/06(B)
Rev. B | Page 16 of 16
Similar pages