Spec Sheet HIGH FREQUENCY PRODUCTS SAW Filter F6KB2G350B4HTB Features Item Summary TD-LTE , Rx, 504 Lifecycle Stage Mass Production Standard packaging quantity (minimum) Taping Embossed 3000 , 15000pcs Products characteristics table External Dimensions -30 to +85℃ L 1.4mm +0.1:-0.1 Band(3GPP) B40 W 1.0mm +0.1:-0.1 Use TDLTE T 0.5mm max Transmitting / Receiving Rx Filter Insertion Loss 2.5dB RoHS Compliance Yes Halogen Free Yes Soldering Method Reflow Temperature Range 2015.06.03 The data is reference only. Electrical characteristics vary depending on environment or measurement condition. TAIYO YUDEN reserves the right to make change to the Date at any time without notice. Before making final selection, please check product specification. http://www.ty-top.com Powered by TCPDF (www.tcpdf.org) MSL1 *Pb Free part Customer Name Standard specification System Band40 Rx (50/100ohm Balance) DATE July 22, 2011 Part Number F6KB2G350B4HTB Version 2.2b Final Table 1 Electrical Specification Passband :2300 ~ 2400 MHz Item Condition Specification Min. Typ. Max. Unit Insertion Loss 2300 – 2400MHz - 2.5 3.5 dB Ripple 2300 – 2400MHz - 0.9 2.0 dB VSWR Amplitude Balance (|S21|/|S31|) Phase Balance 2300 – 2400MHz - 2.2 dB 2300 – 2400MHz -1.5 1.7 -0.6/ +0.8 +1.5 dB 2300 – 2400MHz -15 -3/+8 +15 deg 50 – 2000MHz 35 44 - dB 2000 – 2215MHz 35 41 - dB 2215 – 2240MHz 20 39 - dB 2460 – 2485MHz 20 39 - dB 2485 – 3000MHz 33 38 - dB 3000 – 4000MHz 25 43 - dB 4000 – 6000MHz 20 52 - dB ((Phase(S21) - Phase(S31))+180) Absolute attenuation Input Impedance Unbalanced 50//4.7nH ohm Balanced 100//12nH ohm Device size 1.4typ. x 1.0typ. x 0.5max. mm Operating Temperature -30 ~ +85 Output Impedance (*1):Specification of insertion loss includes loss that comes from the test board.(0.15dB) o C Remark (*1) MSL1 *Pb Free part Customer Name Standard specification System Band40 Rx (50/100ohm Balance) DATE July 22, 2011 Part Number F6KB2G350B4HTB Version 2.2b Final Dimension Device size: 1.4typ. x 1.0typ. x 0.5max. index Unit: mm Pin Configuration Pin No. Symbol Function 1 2 3 4 5 IN GND OUT OUT GND Unbalanced pin Ground Balanced pin Balanced pin Ground Evaluation Circuit MSL1 *Pb Free part Customer Name Standard specification System Band40 Rx (50/100ohm Balance) DATE July 22, 2011 Part Number F6KB2G350B4HTB Version 2.2b Final Fig.1 Pass-band Characteristics Fig.2 VSWR Input Output MSL1 *Pb Free part Customer Name Standard specification System Band40 Rx (50/100ohm Balance) DATE July 22, 2011 Part Number F6KB2G350B4HTB Version 2.2b Final Fig.3 In-band Characteristics Fig.4 Wide-band Characteristics MSL1 *Pb Free part Customer Name Standard specification System Band40 Rx (50/100ohm Balance) DATE July 22, 2011 Part Number F6KB2G350B4HTB Version 2.2b Final Fig.5 Input impedance Fig.6 Output impedance MSL1 *Pb Free part Customer Name Standard specification System Band40 Rx (50/100ohm Balance) DATE July 22, 2011 Part Number F6KB2G350B4HTB Version 2.2b Final Fig.7 Amplitude Balance Fig.8 Phase Balance Ordering Code MSL1 *Pb Free part Customer Name Standard specification System Band40 Rx (50/100ohm Balance) DATE July 22, 2011 Part Number F6KB2G350B4HTB Version 2.2b Final Ordering Code F6KB2G350B4HTBZ F6KB2G350B4HTBZA F6KB2G350B4HTBY F6KB2G350B4HTBQ Packing Tape & Reel Tape & Reel Tape & Reel Bulk Reel size 3,000pcs. less than 3,000 pcs. 15,000pcs few pcs. Status MP MP MP MP *Minimum order quantity (MOQ) is assigned for each inquiry, Please contact to Sales Representatives.. *MP : Mass Production Notice All of the contents specified herein are subject to change without notice due to technical improvements, etc. Please contact TAIYO YUDEN Co., Ltd. for further details of product specifications. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment.