FTR-K1 SERIES POWER RELAY 1 POLE - 10A High Sensitivity RoHS compliant FTR-K1 Series n FEATURES l l l l l l l l l Low profile (height: 15.7mm) HIGH ISOLATION Insulation Distance (between coil and contacts): 10mm min. Dielectric strength: 5KV Surge strength: 10KV UL F Class wire Low coil power (400mW) Cadmium free contacts SAFETY STANDARDS UL, CSA, VDE, SEMKO approved UL, CSA TV-5 rating approved (1 form A type) RoHS Compliant UL F class isolation VDE Glow-wire ignitablility test 775 (IEC60335-1) approved n ORDERING INFORMATION [Example] FTR-K1 (a) A (b) L (c) 005 (d) W (e) LA (f ) (– BG) (g) (a) Series Name FTR-K1 : FTR-K1 Series (b) Contact Arrangement A : 1 form A (SPST-NO) (c) Coil Type / Enclosure L : High sensitivity (200 mW) / flux free (d) Nominal Voltage 005 018 : 5 VDC, : 18 VDC (e) Contact Material / TV type W : AgSnO2 (f) Terminal Pitch LA LB : 10A high sensitive (250 mW) 3.5mm pitch : 10A high sensitive (250 mW) 5.0mm pitch (f) Special Designation BG : Gold plated ; 3µm 006 : 6VDC, 024 : 24VDC, 009 : 9VDC 048 : 48VDC 012 : 12VDC Actual marking does not carry the type name : "FTR" E.g.: Ordering code: FTR-K1AL012WLA Actual marking: K1AL012WLA FTR-K1 SERIES n PART NUMBERS 250mW type Ordering Part Number Series Contact Coil Power Coil Voltage FTR-K1AL005W-LA-(BG) 5 FTR-K1AL006W-LA-(BG) 6 FTR-K1AL009W-LA-(BG) 9 FTR-K1AL012W-LA-(BG) 12 FTR-K1AL018W-LA-(BG) 18 FTR-K1AL024W-LA-(BG) 24 FTR-K1AL048W-LA-(BG) FTR-K1AL005W-LB-(BG) FTR-K1 A: 1 form A L: 250 mW 48 5 FTR-K1AL006W-LB-(BG) 6 FTR-K1AL009W-LB-(BG) 9 FTR-K1AL012W-LB-(BG) 12 FTR-K1AL018W-LB-(BG) 18 FTR-K1AL024W-LB-(BG) 24 FTR-K1AL048W-LB-(BG) 48 Contact Material Terminal Pitch Special LA: 10A 3.5mm pitch W: AgSnO2 BG: Gold plated LB: 10A 5.0mm pitch n COIL DATA CHART Coil Voltage Nominal Voltage (VDC) Max. Coil Voltage*1 Coil Resistance (±10%) Must Operate Voltage*2 Must Release Voltage*2 005 5 15.0 VDC 100 Ω 3.75 VDC 0.5 VDC 006 6 18.0 VDC 145 Ω 4.5 VDC 0.6 VDC 009 9 27.0 VDC 325 Ω 6.75 VDC 0.9 VDC 012 12 36.0 VDC 575 Ω 9.0 VDC 1.2 VDC 018 18 54.0 VDC 1,300 Ω 13.5 VDC 1.8 VDC 024 24 72.0 VDC 2,310 Ω 18.0 VDC 2.4 VDC 048 48 144.0 VDC 9,216 Ω 36.0 VDC 4.8 VDC Nominal Power (mW) 250 Note: All values in the table are measured at 20°C. *1: No contact current at 20°C *2: Specified values are subject to pulse wave voltage FTR-K1 SERIES n SPECIFICATIONS Item FTR-K1 AL ( ) W- (LA, LB) Contact Arrangement 1 form A Material Coil AgSnO2 Resistance (initial) Maximum 100 mΩ at 1 A, 6 VDC Rating 10 A, 250 VAC Maximum Carrying Current*1 10 A Maximum Switching Rating 2,500VA Maximum Switching Voltage 440 VAC Minimum Switching Load*2 10 mA 5 VDC Nominal Power (at 20ºC) 250mW Operate Power (at 20ºC) 141 mW Operating Temperature -40ºC to +85ºC (no frost), (LB: -40ºC to +105ºC) Time Value Operate (without diode) Maximum 15ms (at nominal voltage, no bounce) Release (without diode) Maximum 5ms (at nominal voltage, no bounce) Life Mechanical 20 x 106 operations minimum AC Contact rating 100 x 103 operations min. DC contact rating - Vibration Resistance Misoperation 10 to 55 Hz, at double amplitude of 0.7 mm Endurance 10-55Hz, at double amplitude of 1.5 mm Shock Resistance Misoperation Electrical Other Weight Endurance Min. 100m/s2 (11±1ms) Min. 1,000m/s2 (6±1ms) Approximately 13g *1 Need to consider the heat from PCB when max. current is more than 10A. *2 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels. FTR-K1 SERIES n INSULATION Item FTR-K1 Note Resistance (initial) Minimum 1,000 MΩ 1 min. at 500 VDC Dielectric Strength open contacts 1,000 VAC (50/60 Hz) 1 min. coil and contacts 5,000 VAC (50/60 Hz) 1 min. Surge Voltage (coil and contact) 10,000 V Clearance/Creepage 10 mm / 10 mm Insulation (DIN EN61810-1 VDE0435) Voltage Pollution Isolation material group 250 V 3 IIIa 1.2 x 50µs standard wave Isolation category / Reference voltage (VDE0110b) C / 250 V n SAFETY STANDARDS Type Compliance Contact rating UL UL 508 Flammability: UL 94-V0 (plastics) E63614 FTR-K1AL ( )W-(LA, LB) 10A, 277 VAC (resistive) 1/3 HP, 125VAC 1/2 HP, 277VAC Pilot duty: B300 FTR-K1CL( )W-LA 10A, 277 VAC (resistive) CSA C22.2 No. 14 LR 40304 VDE 0435, 0631, 0700, 0860 SEMKO EN 61058-1:1992 and A1 250VAC, 10 (3)A 40T85 (-LA) EN 61095:1993 and A1+A11 250VAC, 10 (3)A 40T105(-LB) FTR-K1AL ( )W-(LA, LB) 10A, 250 VAC, 150,000 cycles, LA: 85ºC, LB:105ºC 3A, 250 VAC (cosØ=0.4), 100,000 cycles, LA: 85ºC, LB:105ºC FTR-K1CL( )W-LA 10A, 250VAC, 100,000 cycles, 85ºC Complies with NEMKO, DEMKO, FIMKO FTR-K1 SERIES n CHARACTERISTIC DATA 70 0A 60 50 40 30 20 0 0 0A 0 0.2 0.4 0.6 0.8 .0 Service Life (03 operations) Life Curve 000 250VAC resistive 500 250VAC cosφ=0.7 200 00 AC250V cosφ=0.4 30 (05ºC) 20 0 0 2 3 4 5 6 7 8 2 9 0 2 Contact Current Load (A) 0A 0A .5 ot coil) ge (h rate volta 0.5 e must op coil) ge (cool ate volta er op must 0 20 40 60 80 80 5 2 0.5 0.2 Release 70 60 50 40 30 80 200 500 000 70 60 50 40 30 0 Nominal Voltage Multiplying Factor 00 FTR-KAL02W-LA N=00 Make 90 0 0 20 30 40 50 60 70 80 90 00 50 Distribution of Contact Resistance 20 0 20 00 20 0 0 Contact Voltage (V) FTR-KAL02W-LA N=00 Operate 90 FTR-K-AL AC resistive 0 0. 00 Maximum Switching Power 20 Ambient temperature (ºC) Distribution of Operation & Release Voltage 00 FTR-K AL 300 50 FTR-K AL .2 Coil Power (W) 50 Switching Current (A) 80 Operating Range 2.5 Distribution (%) 90 Distribution (%) Temperature Rise (deg.) Nominal voltage multiplying factor Coil Temperature Rise 00 0 0 0 20 30 40 Contact Resistance (mΩ) 50 FTR-K1 SERIES n DIMENSIONS l Dimensions l Schematics (BOTTOM VIEW) FTR-K1AL ( ) W-LA 29 +0.3 12.7+0.3 5 8 15.7+0.3 NO COM 2 4 0.5 0.3 φ 0.45 (2.6) 20 3.5 3.3 Orientation mark Presolder 0.9 (2.6) 0.9 7.5 l PC board mounting hole layout (BOTTOM VIEW) (29) 20 (2.6) 2-φ ±0. 3.5 7.5 (2.6) 2-φ .3±0. l Dimensions l Schematics (BOTTOM VIEW) FTR-K1AL ( ) W-LB 15.7 +0.3 8 7 5 12.7 +0.3 29 +0.3 COM NO COM NO 4 2 20 ±0.25 0.5 5 0.9 (2.6) 0.9 7.5 l PC board mounting hole layout (BOTTOM VIEW) (2.6) 20 2-φ±0. 5 4-φ .3±0. (2.6) (2.6) 0.3 7.5 φ 0.45 3.3 Orientation mark Unit: mm FTR-K1 SERIES RoHS Compliance and Lead Free Relay Information 1. General Information Relays produced after the specific date code that is indicated on each data sheet are lead-free now. All of our signal and power relays are lead-free. Please refer to Lead-Free Status Info. (http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf) l Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. l All signal and power relays also comply with RoHS. Please refer to individual data sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE, DecaBDE). l It has been verified that using lead-free relays in leaded assembly process will not cause any problems (compatible). l “LF” is marked on each outer and inner carton. (No marking on individual relays). Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC) l 2. Recommended Lead Free Solder Profile l Recommended solder paste Sn-3.0Ag-0.5Cu. Solder condition Flow Solder condition: Pre-heating: Soldering: maximum 120˚C dip within 5 sec. at 260˚C solder bath Solder by Soldering Iron: Soldering Iron Temperature: maximum 360˚C Duration: maximum 3 sec. We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity l Moisture Sensitivity Level standard is not applicable to electromechanical relays. 4. Tin Whisker l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in house test. FTR-K1 SERIES Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: [email protected] Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: [email protected] Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: [email protected] Web: http://www.fujitsu.com/us/services/edevices/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: [email protected] Web: http://www.fujitsu.com/sg/services/micro/components/ ©2008 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. July 21, 2008.