DATA SHEET THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE AC series ±5%, ±1%, ±0.5% Sizes 0201/0402/0603/0805/1206/ 1210/1218/2010/2512 Product specification – November 02, 2016 V.5 RoHS compliant & Halogen free 2 Product specification Chip Resistor Surface Mount AC 12 0201 to 2512 SERIES SCOPE ORDERING INFORMATION - GLOBAL PART NUMBER This specification describes AC0201 to AC2512 chip resistors with leadfree terminations made by thick film process. Part number is identified by the series name, size, tolerance, packaging type, temperature coefficient, taping reel and resistance value. APPLICATIONS All general purpose applications Car electronics, industrial application FEATURES AEC-Q200 qualified Moisture sensitivity level: MSL 1 AC series soldering is compliant with J-STD-020D Halogen free epoxy RoHS compliant - Products with lead-free terminations meet RoHS requirements - Pb-glass contained in electrodes, resistor element and glass are exempted by RoHS Reduce environmentally hazardous waste High component and equipment reliability The resistors are 100% performed by automatic optical inspection prior to taping. GLOBAL PART NUMBER AC XXXX X X X XX XXXX L (1) (2) (3) (4) (5) (6) (7) (1) SIZE 0201/ 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512 (2) TOLERANCE D = ± 0.5% F = ± 1% J = ± 5% (for Jumper ordering, use code of J) (3) PACKAGING TYPE R = Paper taping reel K = Embossed taping reel (4) TEMPERATURE COEFFICIENT OF RESISTANCE – = Base on spec (5) TAPING REEL 07 = 7 inch dia. Reel 13 = 13 inch dia. Reel 7W = 7 inch dia. Reel & 2 x standard power (6) RESISTANCE VALUE 1Ω to 22 MΩ There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no need to mention the last zero after R/K/M, e.g.1K2, not 1K20. Detailed coding rules of resistance are shown in the table of “Resistance rule of global part number”. (7) DEFAULT CODE Letter L is the system default code for ordering only. (Note) Resistance rule of global part number Resistance coding Example rule XRXX (1 to 9.76 Ω) 1R = 1 Ω 1R5 = 1.5 Ω 9R76 = 9.76 Ω XXRX (10 to 97.6 Ω) 10R = 10 Ω 97R6 = 97.6 Ω XXXR (100 to 976 Ω) 100R = 100 Ω 976R = 976 Ω XKXX (1 to 9.76 KΩ) 1K = 1,000 Ω 9K76 = 9760 Ω XMXX (1 to 9.76 MΩ) 1M = 1,000,000 Ω 9M76= 9,760,000 Ω XXMX (10 MΩ) 10M = 10,000,000 Ω O RDERING EXAMPLE The ordering code for an AC0402 chip resistor, value 100 KΩ with ± 1% tolerance, supplied in 7-inch tape reel is: AC0402FR-07100KL. NOTE 1. All our R-Chip products are RoHS compliant and Halogen free. "LFP" of the internal 2D reel label states "Lead-Free Process". 2. On customized label, "LFP" or specific symbol can be printed. 3. AC series with ±0.5% tolerance is also available. For further information, please contact sales. www.yageo.com Nov. 02, 2016 V.5 Product specification Chip Resistor Surface Mount AC SERIES 3 12 0201 to 2512 MARKING AC0201 / AC0402 No marking Fig. 1 AC0603 / AC0805 / AC1206 / AC1210 / AC2010 / AC2512 03 Fig. 2 E-24 series: 3 digits, ± 5% First two digits for significant figure and 3rd digit for number of zeros Value=10 KΩ AC0603 0 Fig. 3 E-24 series: 3 digits, ± 1% & ± 0.5% One short bar under marking letter Value = 24 Ω E-96 series: 3 digits, ± 1% & ± 0.5% First two digits for E-96 marking rule and 3rd letter for number of zeros Fig. 4 Value = 12.4 KΩ AC0805 / AC1206 / AC1210 / AC2010 / AC2512 Both E-24 and E-96 series: 4 digits, ± 1% & ± 0.5% First three digits for significant figure and 4th digit for number of zeros Fig. 5 Value = 10 KΩ AC1218 E-24 series: 3 digits, ± 5% First two digits for significant figure and 3rd digit for number of zeros Fig. 6 Value = 10 KΩ 00 Both E-24 and E-96 series: 4 digits, ± 1% & ± 0.5% First three digits for significant figure and 4th digit for number of zeros Fig. 7 Value = 10 KΩ NOTE For further marking information, please refer to data sheet “Chip resistors marking”. Marking of AC series is the same as RC series. www.yageo.com Nov. 02, 2016 V.5 Product specification Chip Resistor Surface Mount AC SERIES 4 12 0201 to 2512 CONSTRUCTION The resistors are constructed on top of an automotive grade ceramic body. Internal metal electrodes are added at each end and connected by a resistive glaze. The resistive glaze is covered by a lead-free glass. The composition of the glaze is adjusted to give the approximately required resistance value and laser trimming of this resistive glaze achieves the value within tolerance. The whole element is covered by a protective overcoat. Size 0603 and bigger is marked with the resistance value on top. Finally, the two external terminations (Ni / matte tin) are added, as shown in Fig.8. OUTLINES marking layer overcoat overcoat protective glass protective glass resistive layer (Jumper chip is a conductor) resistive layer (Jumper chip is a conductor) inner electrode termination(Ni/matte tin) inner electrode inner electrode termination(Ni/matte tin) inner electrode ceramic substrate YNSC088 Fig. 8_1 marking layer ceramic substrate YNSC088_1 Fig. 8_2 Chip resistor outlines AC2010/ 2512 double power chip resistor outlines DIMENSIONS Table 1 For outlines, please refer to Fig. 9 TYPE L (mm) W (mm) H (mm) I1 (mm) I2 (mm) AC0201 0.60± 0.03 0.30± 0.03 0.23± 0.03 0.12± 0.05 0.15± 0.05 AC0402 1.00 ± 0.05 0.50 ± 0.05 0.32 ± 0.05 0.20 ± 0.10 0.25 ± 0.10 AC0603 1.60 ± 0.10 0.80 ± 0.10 0.45 ± 0.10 0.25 ± 0.15 0.25 ± 0.15 AC0805 2.00 ± 0.10 1.25 ± 0.10 0.50 ± 0.10 0.35 ± 0.20 0.35 ± 0.20 AC1206 3.10 ± 0.10 1.60 ± 0.10 0.55 ± 0.10 0.45 ± 0.20 0.40 ± 0.20 AC1210 3.10 ± 0.10 2.60 ± 0.15 0.50 ± 0.10 0.45 ± 0.15 0.50 ± 0.20 AC1210 7W 3.10 ± 0.10 2.60 ± 0.15 0.55 ± 0.10 0.45 ± 0.15 0.50 ± 0.20 AC1218 3.10 ± 0.10 4.60 ± 0.10 0.55 ± 0.10 0.45 ± 0.20 0.40 ± 0.20 AC2010 5.00 ± 0.10 2.50 ± 0.15 0.55 ± 0.10 0.55 ± 0.15 0.50 ± 0.20 AC2512 6.35 ± 0.10 3.10 ± 0.15 0.55 ± 0.10 0.60 ± 0.20 0.50 ± 0.20 For dimension, please refer to Table 1 AC0201/0402 0603/0805/1206/1210/ 2010/2512 AC1218 Side view for all type Fig. 9 Chip resistor dimensions www.yageo.com Nov. 02, 2016 V.5 Product specification Chip Resistor Surface Mount AC SERIES 5 12 0201 to 2512 ELECTRICAL CHARACTERISTICS Table 2 TYPE POWER AC0201 1/20 W Operating Temperature Range –55 °C to 155 °C Max. Working Voltage CHARACTERISTICS Resistance Max. Dielectric Range Overload Withstandin Voltage g Voltage 50V 50V Jumper Criteria 5% (E24) 1Ω≤R≤10Ω Rated 1Ω≤R≤10MΩ -100/+350ppm℃ Current 10Ω<R≤10MΩ 0.5A ±200ppm℃ Maximum 1% (E24/E96) 25V Temperature Coefficient 1Ω≤R≤10MΩ 0.5% (E24/E96) Current 10Ω≤R≤1MΩ 1.0A Jumper<50mΩ 1/16 W –55 °C to 155 °C 5% (E24) 1Ω≤R≤10Ω Rated 1Ω≤R≤22MΩ ±200ppm°C Current 10Ω<R≤10MΩ 1A ±100ppm°C Maximum 10MΩ<R≤22MΩ Current ±200ppm°C 2A 0.5%, 1% (E24/E96) 50V 100V 100V 1Ω≤R≤10MΩ Jumper<50mΩ AC0402 5% (E24) 1/8W 1/10 W –55 °C to 155 °C –55 °C to 155 °C 1Ω≤R≤10MΩ 50V 100V 100V 0.5%, 1% (E24/E96) 1Ω≤R≤10MΩ 150V 150V –55 °C to Rated 1Ω≤R≤22MΩ ±200ppm°C Current 10Ω<R≤10MΩ 1A ±100ppm°C Maximum 10MΩ<R≤22MΩ Current ±200ppm°C 2A 1Ω≤R≤10MΩ Jumper<50mΩ 155 °C 75V 150V ±100 ppm°C 1Ω≤R≤10Ω AC0603 1/5 W ±200 ppm°C 10Ω<R≤10MΩ 5% (E24) 0.5%, 1% (E24/E96) 75V 1Ω≤R≤10Ω 5% (E24) 1Ω≤R≤10Ω 1Ω≤R≤10MΩ ±200 ppm°C 150V 0.5%, 1% (E24/E96) 1Ω≤R≤10MΩ 10Ω<R≤10MΩ ±100 ppm°C www.yageo.com Nov. 02, 2016 V.5 Product specification Chip Resistor Surface Mount TYPE POWER 1/8 W Operating Temperature Range –55 °C to 155 °C Max. Working Voltage AC SERIES CHARACTERISTICS Resistance Max. Dielectric Range Overload Withstandin Voltage g Voltage 300V 300V –55 °C to Rated 1Ω≤R≤22MΩ ±200ppm°C Current 10Ω<R≤10MΩ 2A ±100ppm°C Maximum 10MΩ<R≤22MΩ Current ±200ppm°C 5A 1Ω≤R≤10MΩ Jumper<50mΩ 155 °C 150V 300V 5% (E24) 1Ω≤R≤10Ω 1Ω≤R≤10MΩ ±200 ppm°C 300V 0.5%, 1% (E24/E96) 1Ω≤R≤10MΩ 5% (E24) 1Ω≤R≤22MΩ 1/4 W –55 °C to 155 °C 0.5%, 1% (E24/E96) 200V 400V 500V 1Ω≤R≤10MΩ Jumper<50mΩ AC1206 1/2 W 1/2 W –55 °C to 155 °C –55 °C to 155 °C 200V 400V –55 °C to 155 °C 500V ±200ppm°C 10Ω<R≤10MΩ 2A ±100ppm°C Maximum 10MΩ<R≤22MΩ Current ±200ppm°C 10A 10Ω<R≤10MΩ ±100 ppm°C 5% (E24) 1Ω≤R≤10Ω Rated 1Ω≤R≤22MΩ ±200ppm°C Current 10Ω<R≤10MΩ 2A ±100ppm°C Maximum 10MΩ<R≤22MΩ Current ±200ppm°C 10A 1Ω≤R≤10MΩ Jumper<50mΩ 200V Rated Current ±200 ppm°C AC1210 1W 1Ω≤R≤10Ω 1Ω≤R≤10Ω 500V 0.5%, 1% (E24/E96) 500V ±100 ppm°C 5% (E24) 0.5%, 1% (E24/E96) 500V 10Ω<R≤10MΩ 1Ω≤R≤10MΩ 1Ω≤R≤10MΩ 200V Jumper Criteria 1Ω≤R≤10Ω AC0805 1/4 W Temperature Coefficient 5% (E24) 0.5%, 1% (E24/E96) 150V 6 12 0201 to 2512 5% (E24) 1Ω≤R≤10Ω 1Ω≤R≤10MΩ ±200 ppm°C 500V 0.5%, 1% (E24/E96) 1Ω≤R≤10MΩ 10Ω<R≤10MΩ ±100 ppm°C www.yageo.com Nov. 02, 2016 V.5 Product specification Chip Resistor Surface Mount TYPE POWER 1W Operating Temperature Range –55 °C to 155 °C Max. Working Voltage AC SERIES CHARACTERISTICS Resistance Max. Dielectric Range Overload Withstandin Voltage g Voltage 500V 500V Temperature Coefficient Jumper Criteria 5% (E24) 1Ω≤R≤10Ω Rated 1Ω≤R≤1MΩ ±200ppm°C Current 10Ω<R≤1MΩ 6A ±100ppm°C Maximum 0.5%, 1% (E24/E96) 200V 7 12 0201 to 2512 1Ω≤R≤1MΩ Jumper<50mΩ Current AC1218 10A 1.5W 3/4 W –55 °C to 155 °C –55 °C to 155 °C 200V 500V 5% (E24) 1Ω≤R≤10Ω 1Ω≤R≤1MΩ ±200 ppm°C 500V 0.5%, 1% (E24/E96) 1Ω≤R≤1MΩ 500V 500V 5% (E24) 1Ω≤R≤10Ω Rated ±200ppm°C Current 10Ω<R≤10MΩ 2A ±100ppm°C Maximum 10MΩ<R≤22MΩ Current ±200ppm°C 10A 1Ω≤R≤10MΩ Jumper<50mΩ AC2010 1.25W 1W –55 °C to 155 °C –55 °C to 155 °C 200V 500V 5% (E24) 1Ω≤R≤10Ω 1Ω≤R≤10MΩ ±200 ppm°C 500V 0.5%, 1% (E24/E96) 1Ω≤R≤10MΩ 500V 500V –55 °C to 1Ω≤R≤10Ω Rated ±200ppm°C Current 10Ω<R≤10MΩ 2A ±100ppm°C Maximum 10MΩ<R≤22MΩ Current ±200ppm°C 10A 1Ω≤R≤10MΩ Jumper<50mΩ 155 °C 200V 400V ±100 ppm°C 5% (E24) AC2512 2W 10Ω<R≤10MΩ 1Ω≤R≤22MΩ 0.5%, 1% (E24/E96) 200V ±100 ppm°C 1Ω≤R≤22MΩ 0.5%, 1% (E24/E96) 200V 10Ω<R≤1MΩ 5% (E24) 1Ω≤R≤10Ω 1Ω≤R≤10MΩ ±200 ppm°C 500V 0.5%, 1% (E24/E96) 1Ω≤R≤10MΩ 10Ω<R≤10MΩ ±100 ppm°C www.yageo.com Nov. 02, 2016 V.5 Product specification Chip Resistor Surface Mount AC 8 12 0201 to 2512 SERIES FOOTPRINT AND SOLDERING PROFILES Recommended footprint and soldering profiles of AC -series is the same as RC-series. Please refer to data sheet “Chip resistors mounting”. PACKING STYLE AND PACKAGING QUANTITY Table 3 Packing style and packaging quantity PACKING STYLE Paper taping reel (R) Embossed taping reel (K) REEL AC0201 AC0402 AC0603 AC0805 AC1206 AC1210 AC1218 AC2010 AC2512 DIMENSION 7" (178 mm) 10,000 10,000 5,000 5,000 5,000 5,000 --- --- --- 13" (330 mm) 50,000 50,000 20,000 20,000 20,000 20,000 --- --- --- 7" (178 mm) --- --- --- --- --- --- 4,000 4,000 4,000 NOTE 1. For paper/embossed tape and reel specifications/dimensions, please refer to data sheet “Chip resistors packing”. TEMPERATURE COEFFICIENT OF RESISTANCE RESISTANCE RANGE FUNCTIONAL DESCRIPTION 100 mΩ to 910 mΩ PT040 OPERATING TEMPERATUR±E200 RAppm/°C NGE 2 Range: –55 °C to +155 °C PT060 ± 200 ppm/°C P 3 OWER RATING Each type rated power at 70 °C: PT080 AC0201=1/20W (0.05W) ± 200 ppm/°C 5 AC0402=1/16W (0.0625W); 100 MΩ TO 910 MΩ 1/8W (0.125W) AC0603=1/10W (0.1W); 1/5W (0.2W) PT120 100 mΩ AC0805=1/8W (0.125W); 1/4 W(0.25 W) 6 AC1206=1/4W (0.25W); 1/2 W (0.5 W) PT201 AC1210=1/2W (0.5W); 1W ± 100 ppm/°C 0 AC1218=1W; 1.5W AC2010=3/4W (0.75W); 1.25W PT251 ± 100 ppm/°C AC2512=1 W; 2W 2 R ATED VOLTAGE > 100 mΩ ± 75 ppm/°C ± 75 ppm/°C Fig. 10 Maximum dissipation (P max) in percentage of rated power as a function of the operating ambient temperature (T amb) The DC or AC (rms) continuous working voltage corresponding to the rated power is determined by the following formula: V= (PxR) Or Maximum working voltage whichever is less Where V = Continuous rated DC or AC (rms) working voltage (V) P = Rated power (W) R = Resistance value (Ω) www.yageo.com Nov. 02, 2016 V.5 Product specification Chip Resistor Surface Mount AC SERIES 9 12 0201 to 2512 TESTS AND REQUIREMENTS Table 4 Test condition, procedure and requirements TEST TEST METHOD PROCEDURE REQUIREMENTS High Temperature Exposure AEC-Q200 Test 3 1,000 hours at TA = 155 °C, unpowered ± (1.0%+0.05Ω) for D/F tol MIL-STD-202 Method 108 ± (2.0%+0.05Ω) for J tol <50 mΩ for Jumper Moisture Resistance AEC-Q200 Test 6 MIL-STD-202 Method 106 Each temperature / humidity cycle is defined at 8 hours (method 106F), 3 cycles / 24 hours for 10d. with 25 °C / 65 °C 95% R.H, without steps 7a & 7b, unpowered ± (0.5%+0.05Ω) for D/F tol ± (2.0%+0.05Ω) for J tol <100 mΩ for Jumper Parts mounted on test-boards, without condensation on parts Biased Humidity Operational Life AEC-Q200 Test 7 MIL-STD-202 Method 103 AEC-Q200 Test 8 MIL-STD-202 Method 108 1,000 hours; 85 °C / 85% RH 10% of operating power ± (1.0%+0.05Ω) for D/F tol Measurement at 24± 4 hours after test conclusion. <100 mΩ for Jumper 1,000 hours at 125 °C, derated voltage applied for 1.5 hours on, 0.5 hour off, still-air required ± (1.0%+0.05Ω) for D/F tol ± (3.0%+0.05Ω) for J tol ± (3.0%+0.05Ω) for J tol <100 mΩ for Jumper Resistance to Soldering Heat Thermal Shock ESD AEC-Q200 Test 15 Condition B, no pre-heat of samples ± (0.5%+0.05Ω) for D/F tol MIL-STD-202 Method 210 Lead-free solder, 260± 5 °C, 10± 1 seconds immersion time ± (1.0%+0.05Ω) for J tol Procedure 2 for SMD: devices fluxed and cleaned with isopropanol No visible damage AEC-Q200 Test 16 -55/+125 °C ± (0.5%+0.05Ω) for D/F tol MIL-STD-202 Method 107 Number of cycles is 300. Devices mounted ± (1.0%+0.05Ω) for J tol Maximum transfer time is 20 seconds. Dwell time is 15 minutes. Air – Air <50 mΩ for Jumper AEC-Q200 Test 17 Human Body Model, ± (3.0%+0.05 Ω) AEC-Q200-002 1 pos. + 1 neg. discharges <50 mΩ for Jumper <50 mΩ for Jumper 0201: 500V 0402/0603: 1KV 0805 and above: 2KV www.yageo.com Nov. 02, 2016 V.5 Product specification Chip Resistor Surface Mount TEST Solderability - Wetting AC SERIES TEST METHOD PROCEDURE AEC-Q200 Test 18 Electrical Test not required Magnification 50X J-STD-002 SMD conditions: (a) Method B, aging 4 hours at 155 °C dry heat, dipping at 235± 3 °C for 5± 0.5 seconds. 10 12 0201 to 2512 REQUIREMENTS Well tinned (≥95% covered) No visible damage (b) Method B, steam aging 8 hours, dipping at 215± 3 °C for 5± 0.5 seconds. (c) Method D, steam aging 8 hours, dipping at 260± 3 °C for 7± 0.5 seconds. Board Flex AEC-Q200 Test 21 AEC-Q200-005 Chips mounted on a 90mm glass epoxy resin PCB (FR4) ± (1.0%+0.05Ω) <50 mΩ for Jumper Bending for 0201/0402: 5 mm 0603/0805: 3 mm 1206 and above: 2 mm Holding time: minimum 60 seconds Temperature Coefficient of Resistance (T.C.R.) MIL-STD-202 Method 304 At +25/–55 °C and +25/+125 °C Refer to table 2 Formula: R2–R1 T.C.R= ------------------------- × 106 (ppm/°C) R1(t2–t1) Where t1=+25 °C or specified room temperature t2=–55 °C or +125 °C test temperature R1=resistance at reference temperature in ohms R2=resistance at test temperature in ohms Short Time Overload FOS IEC60115-1 4.13 ASTM-B-809-95 2.5 times of rated voltage or maximum overload voltage whichever is less for 5 sec at room temperature ± (1.0%+0.05Ω) for D/F tol Sulfur (saturated vapor) 500 hours, 60± 2℃, ± ( 1.0%+0.05Ω) ± (2.0%+0.05Ω) for J tol <50 mΩ for Jumper unpowered www.yageo.com Nov. 02, 2016 V.5 Product specification Chip Resistor Surface Mount AC SERIES 0201 to 2512 11 12 REVISION HISTORY REVISION DATE CHANGE NOTIFICATION DESCRIPTION Version 5 Dec. 07, 2015 - - Add in AC double power Version 4 May 25, 2015 - - Remove 7D packing - Extend resistance range - Add in AC0201 - Update FOS test and requirements Version 3 Feb 13, 2014 - - Feature description updated - add ± 0.5% - delete 10" taping reel Version 2 Feb. 10, 2012 - - Jumper criteria added - AC1218 marking and outline figure updated Version 1 Feb. 01, 2011 - - Case size 1210, 1218, 2010, 2512 extended - Test method and procedure updated - Packing style of 7D added Version 0 Nov. 10, 2010 - - First issue of this specification www.yageo.com Nov. 02, 2016 V.5 Product specification Chip Resistor Surface Mount AC SERIES 0201 to 2512 12 12 LEGAL DISCLAIMER Yageo, its distributors and agents (collectively, “Yageo ”), hereby disclaims any and all liabilities for any errors, inaccuracies or incompleteness contained in any product related information, including but not limited to product specifications, datasheets, pictures and/or graphics. Yageo may make changes, mod ifications and/or improvements to product related information at any time and without notice. Yageo makes no representation, warranty, and/or guarantee about the fitness of its products for any particular purpose or the continuing production of any of its products. To the maximum extent permitted by law, Yageo disclaims (i) any and all liability arising out of the application or use of any Yageo product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for a particular purpose, non -infringement and merchantability. Yageo statements regarding the suitability of products for certain types of applications are based on Yageo’s knowledge of typical operating conditions for such types of applications in a generic nature. Such statements are neither binding statements of Yageo nor intended to constitute any warranty concerning the suitability for a specific customer application or use. They are intended for use only by customers with requisite knowledge and experience for determining whether Yageo products are the correct products for their application or use. In addition, unpredicatable and isolated cases of product failure may still occ ur, therefore, customer application or use of Yageo products which requires higher degree of reliability or safety, shall employ additional protective safeguard measures to ensure that product failure would not result in personal injury or property damage. Yageo products are not designed for application or use in medical, life -saving, or life-sustaining devices or for any other application or use in which the failure of Yageo products could result in personal injury or death. Customers using or selling Yageo products not expressly indicated for above -mentioned purposes shall do so at their own risk and agree to fully indemnify Yageo and hold Yageo harmless. Information provided here is intended to indicate product specifications only. Yageo reserves all t he rights for revising this content without further notification, as long as products are unchanged. Any product change will be announced by PCN. www.yageo.com Nov. 02, 2016 V.5

- Similar pages