COMMANDER CLASS - CHASSIS MOUNT WITH LEAD WIRES POWER TRANSFORMER 1. Standard 6” Lead Length 2. 3. Electrical Specifications A. Maximum Power: 50VA B. Input Voltage and Frequency: 115V, 115/230V or 230V 50/60Hz C. Voltage Regulation: 10% TYP @ full load to no load D. Temperature Rise: 40C TYP E. Insulation Resistance: < 1 MEG ohm F. Hi-Pot: 2500Vrms 1 minute @ Pri to Sec 2500Vrms 1 minute @ Pri to Core 1500Vrms 1 minute @ Sec to Core Marking: Ensign Corp, part number (see table), date code Safety: UL/cUL 5085-2 Recognized (File E47299) UL 1446 Recognized Insulation System (File E95662) Part Number Primary Schematics Single Input (Specify 115V or 120V Single Input (Specify 230V or 240V) Single Input (277V) Tapped Input WHT=COM BLK=120 VIO=277V Dual Input (Specify 115/230V or 120/240V) 115V 115/230V 230V Secondary L050-1-510X L050-2-510X L050-3-510X 10VCT @ 5.0A L050-1-512X L050-2-512X L050-3-512X 12.6VCT @ 4.0A L050-1-516X L050-2-516X L050-3-516X 16VCT @ 3.1A L050-1-520X L050-2-520X L050-3-520X 20VCT @ 2.5A L050-1-524X L050-2-524X L050-3-524X 24VCT @ 2.1A L050-1-528X L050-2-528X L050-3-528X 28VCT @ 1.8A L050-1-536X L050-2-536X L050-3-536X 36VCT @ 1.4A L050-1-548X L050-2-548X L050-3-548X 48VCT @ 1.0A L050-1-556X L050-2-556X L050-3-556X 56VCT @ 900mA L050-1-620X L050-2-620X L050-3-620X 120VCT @ 410mA Secondary Schematics POWER TRANSFORMER COMMANDER CLASS Single Output Center-Tapped Output Dual Output CONTENTS OF THIS DRAWING ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE Ensign Corporation L050-1-XXXX L050-2-XXXX L050-3-XXXX Dim: Inches Sheet 1 of 1 201 ENSIGN RD., BELLEVUE, IA 52031 PROPRIETARY NOTICE: THIS DRAWING PRINT OR DOCUMENT AND SUBJECT MATTER DISCLOSED HEREIN ARE PROPRIETARY ITEMS TO WHICH ENSIGN RETAINS THE EXCLUSIVE RIGHT OF DISSEMINATION, MANUFACTURE AND SALE. THIS DRAWING, PRINT OR DOCUMENT IS SUBMITTED IN CONFIDENCE FOR CONSIDERATION BY THE RECIPIENT ALONE UNLESS PERMISSION FOR FURTHER DISCLOSURE IS EXPRESSLY GRANTED IN WRITING