Hirose HR34B-12WR-10PD Push-on bayonet lock miniature waterproof connector Datasheet

The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
NEW
Push-on Bayonet Lock Miniature Waterproof Connector
HR34B Series
Push-on Bayonet Lock
Mating : Just inserting plug unit will complete mating
Un-mating : Rotating sleeve to unlock mating
fig.1
■Features
Cable exit directions
1. Water and dust protection
• IP67 water and dust protection rating when fully mated.
• Resistant to industrial grade oils.
• 4-position receptacles are sealed against water penetration
when mounted on the panel - no protective cap is required.
45˚
2. Easy and precise mating
• Mating: Just inserting plug unit completes mating
Unmating: Rotating sleeve counterclockwise unlocks
connectors (fig.1)
• Marking helps align plug with receptacle when mating.
• 3 guide keys make blind mating possible.
(Receptacle structure prevents plug from damaging
receptacle terminals)
fig.2
3. Multi-directional cable exit
Right angle plugs allow the cable to exit in 8 directions, in
45˚ increments.(fig.2)
4. Safty standards
The 4-position connectors meet requirements of T ÜV
standard.
5. Wide variation
Item
Number of positions
Connector type
Terminations(plug)
Terminations(receptacle)
Conduit material
Applicable cable size
4,10
straight plug,right angle plug,receptacle
solder,crimp
panel mount through-hole,wire solder
plastic,metal
Ø5.3~7.3, Ø6.5~8.0, Ø8.0~9.0(under development)
2010.52
1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
■Specifications
Current rating
10 pos.: 3 A
4 pos. : 5 A
Operating temperature range
-25°C to 125°C
Voltage rating
10 pos.: 200 V AC, 250 V DC
4 pos. : 200 V AC, 200 V DC (contamination level 3)
400 V AC, 400 V DC (contamination level 2)
Storage temperature range
-25°C to 85°C
Ratings
Item
1.Contact resistance
2.Insulation resistance
30 mø max.
1,000 Mø min.
Specification
Conditions
1 A DC
500 V DC
10 pos. : 900 V AC / 1 minute
4 pos. : 2,000 V AC / 1 minute
3.Withstanding voltage
No flashover or insulation breakdown
4.Vibration
No electrical discontinuity of 10 µs or longer
Frequency: 10 to 500 Hz/cycle, total amplitude of 0.75 mm,
98m/s2 each, 3 hours in 3 axis.
5.Shock
No electrical discontinuity of 10 µs or longer
Acceleration of 490 m/s2, 11 ms duration,
3 axis, each for 3 hours
6.Durability
(Mating / un-mating)
Contact resistance: 30 mø max.
500 cycles
7.Temperature cycle
Insulation resistance: 500 Mø min.
Temperature :-55°C / +15° to +35°C / +85°C / +15° to +35°C
Time
:-30 min. / 10 to 15 min. / 30 min. / 10 to 15 min.
5 cycles
8.Humidity
Insulation resistance: 50 Mø min. (at high humidity)
Insulation resistance: 500 Mø min. (when dry)
336 hours at 71°C, and humidity of 95%
9.Water protection
No water penetration when submerged for 48 hours at the depth of 1.8 meters.
■Materials
●Plugs
Part
Material
Zinc alloy, aluminum alloy, and
polyamide resin (black)
Outer shell
Insulator
Female contacts
10 pos.
4 pos.
O-ring
Gasket
PPS
Phosphor bronze
Copper alloy
Fluororubber,
Nitrile hydride rubber
Finish
Black chrome plating, black
chromate finish (Cr +3)
Remarks
---------------
Color: Black
Gold plated
Silver plated
UL94V-0
-----------------------------
---------------
---------------
●Receptacles
Part
Outer shell
Insulator
Male contacts
Ground contact
O-ring
2
10 pos.
4 pos.
10 pos.
4 pos.
Material
Zinc alloy
PPS
Copper alloy
Brass
Brass
Fluororubber
Finish
Black chromate finish (Cr +3)
Color: Black
Gold plated
Silver plated
Gold plated
Silver plated
---------------
Remarks
--------------UL94V-0
-----------------------------------------------------------------------
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
■Ordering information
●Plugs
HR34B - 12 WP A - 10 S - X ( ** )
1
2
3
4
5
6
1 Series name
2 Shell size
3 Shell style
: HR34B Series
: Diameter(mm) of the mating interface of the plug
WP : Straight plug
WLP : Right-angle plug
4 Conduit material and Applicable cable size
A:Conduit material metal, Applicable cable Ø5.3~7.3
B:Conduit material metal, Applicable cable Ø6.5~8.0
D:Conduit material plastic, Applicable cable Ø5.7~7.3
E:Conduit material plastic, Applicable cable Ø6.5~8.0
K:Conduit material metal, Applicable cable Ø8.0~9.0(under development)
7
8
5 Number of contact : Number of contacts.
(Excluding ground contacts)
6 Contact type
S : Female wire solder
SC : Female crimp
7 Keying
Blank : Standard
X
: X key position
8 Other specifications : 2 numerical digits wil be added when there
is a specifications change other than
shown in positions q to u
●Receptacles
HR34B - 12 WR A - 10 P - X ( ** )
1
1
2
3
4
3
2
4
5
Series name : HR34B Series
Shell size
: Diameter(mm) of the mating interface of the plug
Shell style
WR : Receptacl
Shell type
Blank : Rectangular flange type for 10 positions
A : Square flange for 10 positions
B : Square flange for 4 positions
6
7
8
5 Number of contact : Number of contacts.
(Excluding ground contacts)
6 Contact type
P : Male,wire solder
PD : Male,through hole contact
7 Keying
Blank : Standard
X
: X key position
8 Other specifications : 2 numerical digits wil be added when there
is a specification change other than shown
in positions q to u
●Crimp contacts
HR34B - SC1 - 2 1 1
1
2
1 Series name : HR34B Series
2 Contact style : SC1:Female contact
3 Contact type
3
4
5
4 Conductor size : AWG#20 - 25
5 Plating
1:Gold plated
1 : 100pcs.per bag
2 : 10,000pcs per reel
3
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
■Straight plugs
●Standard type (Conduit material :Plastic)
◆Wire solder
Part Number
A
Ø19
49
All dimensions: mm
HRS No.
A
Applicable cable diameter range
HR34B-12WPD-10S
134-0026-0-00
Ø7.4
Ø5.7~7.3
HR34B-12WPE-10S
134-0027-2-00
Ø8.5
Ø6.5~8.0
HR34B-12WPD-4S
134-0020-3-00
Ø7.4
Ø5.7~7.3
HR34B-12WPD-4S-X
134-0023-1-00
HR34B-12WPE-4S
134-0025-7-00
Ø8.5
Ø6.5~8.0
HR34B-12WPE-4S-X
134-0031-0-00
HRS No.
A
Applicable cable diameter range
HR34B-12WPD-10SC
134-0037-6-00
Ø7.4
Ø5.7~7.3
HR34B-12WPE-10SC
134-0038-9-00
Ø8.5
Ø6.5~8.0
Solder cup inner diameter
Ø1
Ø1.7
◆Crimp (separate contacts required)
Part Number
●Robust type(Conduit material :Metal)
◆Wire solder
Part Number
HR34B-12WPA-10S(71)
HR34B-12WPB-10S(71)
HR34B-12WPK-10S
All dimensions: mm
HRS No.
A
Applicable cable diameter range
134-0004-7-71
Ø7.4
Ø5.7~7.3
134-0007-5-71
Ø8.5
Ø6.5~8.0
Under development
Ø9.5
Ø8.0~9.0
●Crimp (separate contacts required)
Part Number
HRS No.
A
Applicable cable diameter range
134-0017-9-00
Ø7.4
Ø5.7~7.3
HR34B-12WPB-10SC
134-0028-5-00
Ø8.5
Ø6.5~8.0
HR34B-12WPK-10SC
Under development
Ø9.5
Ø8.0~9.0
HR34B-12WPA-10SC
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
4
Solder cup inner diameter
Ø1
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
■Right angle plugs
●Standard type (Conduit material : Plastic)
B
33.5
A
Ø19
◆Wire solder
Part Number
All dimensions: mm
HRS No.
A
HR34B-12WLPD-10S
134-0039-1-00
Ø7.4
Ø5.7~7.3
HR34B-12WLPE-10S
134-0040-0-00
Ø8.5
Ø6.5~8.0
HR34B-12WLPD-4S
134-0030-7-00
HR34B-12WLPD-4S-X
134-0034-8-00
HR34B-12WLPE-4S
134-0035-0-00
HR34B-12WLPE-4S-X
134-0036-3-00
Ø7.4
B
30.85
Applicable cable diameter range
Solder cup inner diameter
Ø1
Ø5.7~7.3
Ø1.7
Ø8.5
Ø6.5~8.0
◆Crimp (separate contacts required)
Part Number
HRS No.
A
HR34B-12WLPD-10SC
134-0041-3-00
Ø7.4
HR34B-12WLPE-10SC
134-0042-6-00
Ø8.5
B
30.85
Applicable cable diameter range
Ø5.7~7.3
Ø6.5~8.0
●Robust type (Conduit material :Metal)
◆Wire solder
Part Number
All dimensions: mm
HRS No.
A
HR34B-12WLPA-10S(71)
134-0005-0-71
Ø7.4
HR34B-12WLPB-10S(71)
134-0008-8-71
Ø8.5
Under development
Ø9.5
31.5
Ø8.0~9.0
B
Applicable cable diameter range
HR34B-12WLPK-10S
B
30.5
Applicable cable diameter range
Solder cup inner diameter
Ø5.7~7.3
Ø6.5~8.0
Ø1
●Crimp (separate contacts required)
Part Number
HRS No.
A
134-0018-1-00
Ø7.4
HR34B-12WLPB-10SC
134-0029-8-00
Ø8.5
HR34B-12WLPK-10SC
Under development
Ø9.5
HR34B-12WLPA-10SC
30.5
31.5
Ø5.7~7.3
Ø6.5~8.0
Ø8.0~9.0
Not all cables of applicable dia. range can be easily assembled.
Please kindly check with factory before use.
5
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
■Receptacles
◆Wire solder
48)
2.
(R
4-Ø
1
3
8
10
B
A
4
3.2
7
A
B
All dimensions: mm
HRS No.
A
B
Solder cup inner diameter
HR34B-12WRA-10P
Part Number
134-0016-6-00
17.26
23.4
Ø1
HR34B-12WRB-4P
134-0021-6-00
18.26
25.4
Ø1.3
HR34B-12WRB-4P-X
134-0024-4-00
O ring for water proof is not attached. Please find appropriate one from the market.
◆Through hole
5.8
8.55
20
3.3
13.4
2
39
Part Number
32.4
3.2
4-Ø
HRS No.
HR34B-12WR-10PD(71)
134-0003-4-71
O ring for water proof is not attached. Please find appropriate one from the market.
■Crimp contacts
◆Female
1.2
15
Part Number
CL No.
Applicable conductor
AWG #20 - 25
(Stranded wire)
HR34B-SC1-111
134-0051-7-00
100 pcs. per bag
HR34B-SC1-211
134-0050-1-00
10,000 pcs. per reel
Note: Use wire with a jacket diameter of 1.7mm max.
6
Packaging
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
■Connector Mating Combinations
10 pos. Plugs
10 pos. Receptacles
Straight, Wire Solder or Crimp (Standard key position)
HR34B-12WPA-10S,10SC HR34B-12WPB-10S,10SC
HR34B-12WPD-10S,10SC HR34B-12WPE-10S,10SC
HR34B-12WPK-10S,10SC
Through hole
HR34B-12WR-10PD
Right angle, Wire Solder or Crimp (Standard key position)
HR34B-12WLPA-10S,10SC HR34B-12WLPB-10S,10SC
HR34B-12WLPD-10S,10SC HR34B-12WLPE-10S,10SC
HR34B-12WLPK-10S,10SC
Wire Solder
HR34B-12WRA-10P
4 pos. Plugs
4 pos. Receptacles
Straight, Wire Solder (Standard key position)
HR34B-12WPD-4S
HR34B-12WPE-4S
Standard
polarizing key
Wire solder (Standard key position)
HR34B-12WRB-4P
Right angle, Wire Solder (Standard key position)
HR34B-12WLPD-4S
HR34B-12WLPE-4S
Standard key position
Straight, Wire Solder (X key position)
HR34B-12WPD-4S-X
HR34B-12WPE-4S-X
Wire solder (X key position)
HR34B-12WRB-4P-X
Right angle, Wire Solder (X key position)
HR34B-12WLPD-4S-X
HR34B-12WLPE-4S-X
X key position
X key position
7
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
■Applicable tools
Description
Part Number
CL No.
Applicable contact
Applicable cable
Manual contact crimping tool
HT304/HR34B-1
150-0107-9
HR34B-SC1-111
AWG20,AWG23,AWG25
Press
CM-105
901-0005-4
HR34B-SC1-211
AWG20 to AWG25
Applicator
AP105-HR34B-1
901-2051-2
Contact extraction tool
RP6-SC-TP
150-0039-0
HR34B-SC1-111
---------------
HR34B-SC1-211
●Manual contact crimping tool
●Press CM-105 (Applicator ordered separate)
●Contact extraction tool
■Illustrations of mated connectors.
Right-angle plug Mating Combinations
10 pos. plug shell A,B type.
10 pos. plug shell D,E type.
10 pos. plug shell K type.
(33.5)
31.0
Plug + receptacle wire solder
31.5
Plug + receptacle through-hole
31.3
Plug + receptacle wire solder
31.8
Plug + receptacle through-hole
32.0
Plug + receptacle wire solder
32.5
4 pos.plug + receptacle wire solder
31.3
B
A
8
A
Plug + receptacle through-hole
Straight plug Mating combinations
B
10 pos.plug + receptacle through-hole
49.6
10 pos.plug + receptacle wire solder
50.1
4 pos.plug + receptacle wire solder
49.6
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
BRecommended panel cutouts
●Receptacle - wire solder
4-B
All dimensions: mm
HR34B-12WRB-4P
HR34B-12WRB-4P-X
17.26±0.05
18.26±0.05
A
HR34B-12WRA-10P
A
M3∞0.5
B
C
A
C
1 0/-0.1
1.1 0/-0.1
D
12.5 +0.1/0
16.3 +0.1/0
E
17 +0.1/0
20.8 +0.1/0
Recommended O ring dia.
Part Number
ØD
HR34B-12WRA-10P
ØE
HR34B-12WRB-4P
HR34B-12WRB-4P-X
●Receptacle - through hole
Cross-section
diameter
1.5
11.5
1.5
15.5
All dimensions: mm
(13.6)
(22.4)
(2.3)(xxx)
5.
(R
4-
(13.4)
4-M3∞0.5
(1.3)
2)
(13.4)
(32.4)
O-ring (Not supplied,
cross-section diameter 1.78 ,
inner diameter 20.35)
Outline of the O-ring
(18)
Notes 1: The receptacle panel cutout shows the view from the mating side of the connector.
BPCB mounting pattern
●Receptacle - Through hole
All dimensions: mm
2.15
(G
10
7
Ø1
2-Ø
1.4
+0
.0
0 5
1.2
3.6
4
8
3
0
te
d
n
ou
1.2
3.6
0
1
0.
+ 0
1
.9 +0.1
2.4
-Ø0
10
rm
r
2.4
17
0°
±3
5.5
Alignment mark
)
al
in
4.4
2.15
(Po
siti
oni
ng
pos
t) N
ote
3
Note 1: The contact configuration shows the view from the mating side.
Note 2: Tolerance of ±0.05 mm is recommended for the plated through hole location and diameter.
Note 3: Not a plated-through holes.
9
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
HR34B Series●Push-on Bayonet Lock Miniature Waterproof Connector
BReceptacle Contact Arrangement
4 pos.wire solder
10 pos.wire solder
1
2
1
4
3
2
5
8
1
3
6
9
10 pos.through hole
4
7
8
10
2
5
3
6
9
7
10
note.1 View direction:Mating surface of pin insert.
note.2
mark is ground terminal.
BHandling
1. Mating
2. Un-mating
Receptacle
Plug
Locking collar
B
A
Rotate counter-clockwise
Mating position alignment marks
Holding the plug by the outer shell (A) align the arrow on the plug
with the alignment mark on the receptacle and push straight in.
Rotate the locking collar counter-clockwise to a full stop and unmate the plug from the receptacle.
BPrecautions
Center line of the connector
When completely mated and locked the alignment arrow on the plug must
line-up with the center line of the connector (alignment mark on the
receptacle).
Alignment mark
If the alignment arrow and the center line of the connectors are not aligned
(1 mm max.) re-insert the plug until they are aligned.
1 mm max.
1. When disconnecting or inserting the connector, be sure to do so after turning off the power.
2. To insert the connector, push it in until the arrow tip of the plug mating mark indicates the specified position of the diagram
below (i.e., the mating mark of the receptacle).
3. Note that the display method of the mating mark will differ depending on the receptacle.
4. To maintain the waterproof quality and cable clamp force, use a cable that is within the range of the applicable cable diameter.
5. Please consult Hirose Electric Sales for harness assembly procedure.
10
Similar pages