Tantalum Solid Electrolytic Capacitors/TE-L Surface Mount Type Series: TE-L SUPER LOW ESR TANTALUM ■ Features Low ESR ■ Specifications Japan Category temp. range -55 to +125°C 4 to 35 V .DC Rated W.V. Range Nominal Cap. Range Resistance to Soldering Heat Moisture Resistance Endurance I < 0.01CV or 0.5 (µA) after 2 minutes application of rated working voltage at 20°C. (Whichever is the greater) Please see the attached standard products list The capacitor shall withstand dipping into solder for 5±1 seconds at +260 ±5°C After 500 hours exposure at +40°C and 90 to 95 % R.H. without load, the capacitor shall meet the following limits. Capacitance change ±10% of initial measured value D.F. < initial specified value DC leakage current < initial specified value After 2000 hours application of rated DC working voltage at +85°C or derated voltage at +125°C, the capacitor shall meet the following limits. ±10% of initial measured value Capacitance change < initial specified value D.F. <125 % of initial specified value DC leakage current Marking ■ Dimensions in mm (not to scale) (- ) ( +) ● Size C,D Cap.(µF) L P W2 Polarity Bar(+side) P w1 W2 ■ 6.8 to 330 µ F ±20 % (120Hz/+20°C) H Capacitance Tolerance DC Leakage Current Dissipation Factor EIA code Szde code L±0.2 W1±0.2 W2±0.1 H±0.2 P±0.3 2.2 6032 C 3.2 2.5 1.3 6.0 2.4 D 7343 7.3 4.3 2.8 1.3 W.V.(V) (for 6.3W.V. abbreviated to 6 V) Each case side has different configuration of terminal. ■ Case size W.V(V.DC) Cap.(µF) 6.8 10 15 22 33 47 68 100 150 220 330 (685) (106) (156) (226) (336) (476) (686) (107) (157) (227) (337) 4(0G) 6.3(0J) 10(1A) 16(1C) 20(1D) C C C C D D C D D C D D 25(1E) C D D D 35(1V) C D D D D D Note : 1. ( )shows W.V. and capacitance code. 2. When selecting W.V. see the page 210. 3. Other rating upon request (voltage, capacitance, tolerance, size) $ESIGN AND SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE !SK FACTORY FOR TECHNICAL SPECIlCATIONS BEFORE PURCHASE ANDOR USE 7HENEVER A DOUBT ABOUT SAFETY ARISES FROM THIS PRODUCT PLEASE CONTACT US IMMEDIATELY FOR TECHNICAL CONSULTATION Tantalum Solid Electrolytic Capacitors/TE-L ■ Standard Products W.V. Cap. (±20%) (V) 4 6.3 10 16 20 25 35 Specification Case Size LxWxH Size Code D.F. (120Hz) (+20°C) L.C Ripple current (100kHz) (100kHz) (+20°C) Part No. ESR Min. Packaging Q'ty Taping (µF) (mm) 100 6.0x3.2x2.5 C 0.08 4.0 0.30 (mA) 606 EEJL0GC107R 750 220 7.3x4.3x2.8 D 0.12 8.8 0.10 1225 EEJL0GD227R 750 330 7.3x4.3x2.8 D 0.14 13.2 0.10 1225 EEJL0GD337R 750 100 6.0x3.2x2.5 C 0.08 6.3 0.30 606 EEJL0JC107R 750 150 7.3x4.3x2.8 D 0.08 9.5 0.10 1225 EEJL0JD157R 750 220 7.3x4.3x2.8 D 0.12 13.9 0.10 1225 EEJL0JD227R 750 47 6.0x3.2x2.5 C 0.06 4.7 0.40 524 EEJL1AC476R 750 100 7.3x4.3x2.8 D 0.08 10.0 0.10 1225 EEJL1AD107R 750 150 7.3x4.3x2.8 D 0.10 15.0 0.10 1225 EEJL1AD157R 750 33 6.0x3.2x2.5 C 0.06 5.3 0.40 524 EEJL1CC336R 750 47 7.3x4.3x2.8 D 0.06 7.6 0.15 1000 EEJL1CD476R 750 10 6.0x3.2x2.5 C 0.06 2.0 0.45 494 EEJL1DC106R 750 15 6.0x3.2x2.5 C 0.06 3.0 0.45 494 EEJL1DC156R 750 33 7.3x4.3x2.8 D 0.06 6.6 0.20 866 EEJL1DD336R 750 10 6.0x3.2x2.5 C 0.06 2.5 0.45 494 EEJL1EC106R 750 15 7.3x4.3x2.8 D 0.06 3.8 0.25 775 EEJL1ED156R 750 22 7.3x4.3x2.8 D 0.06 5.5 0.20 866 EEJL1ED226R 750 33 7.3x4.3x2.8 D 0.08 8.3 0.20 866 EEJL1ED336R 750 6.8 6.0x3.2x2.5 C 0.06 2.4 0.60 428 EEJL1VC685R 750 10 7.3x4.3x2.8 D 0.06 3.5 0.30 707 EEJL1VD106R 750 15 7.3x4.3x2.8 D 0.06 5.3 0.30 707 EEJL1VD156R 750 22 7.3x4.3x2.8 D 0.08 7.7 0.30 866 EEJL1VD226R 750 (µA) (Ω) (pcs) $ESIGN AND SPECIlCATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE !SK FACTORY FOR TECHNICAL SPECIlCATIONS BEFORE PURCHASE ANDOR USE 7HENEVER A DOUBT ABOUT SAFETY ARISES FROM THIS PRODUCT PLEASE CONTACT US IMMEDIATELY FOR TECHNICAL CONSULTATION