® MBRF4035CTR thru MBRF40200CTR Pb MBRF4035CTR thru MBRF40200CTR Pb Free Plating Product 40.0 Amperes Insulated Dual Common Anode Schottky Half Bridge Rectifiers ITO-220AB Unit : inch (mm) .189(4.8) .165(4.2) .272(6.9) .248(6.3) .406(10.3) .381(9.7) .134(3.4) .118(3.0) .130(3.3) .114(2.9) .606(15.4) .583(14.8) .112(2.85) .100(2.55) Features Standard MBR matured technology with high reliablity Low forward voltage drop High current capability Low reverse leakage current High surge current capability Automotive Inverters and Solar Inverters Plating Power Supply,SMPS,EPS and UPS Car Audio Amplifiers and Sound Device Systems .161(4.1)MAX .071(1.8) .055(1.4) .055(1.4) .039(1.0) .035(0.9) .011(0.3) Mechanical Data Case: Fully Isolated Molding TO-220F Full Plastic Pak Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 Polarity: As marked on diode body Mounting position: Any Weight: 2.1 gram approximately .1 .1 (2.55) (2.55) .032(.8) MAX Case Case Case Negative Positive Common Cathode Common Anode Suffix "CT" Suffix "CTR" .114(2.9) .098(2.5) .543(13.8) .512(13.0) Application Case Series Tandem Polarity Suffix "CTS" Doubler Tandem Polarity Suffix "CTD" MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25℃ unless otherwise noted) MBRF MBRF MBRF MBRF MBRF MBRF MBRF MBRF PARAMETER SYMBOL 40100 40150 40200 4035 4045 4050 4060 4090 CTR CTR CTR CTR CTR CTR CTR CTR UNIT Maximum repetitive peak reverse voltage VRRM 35 45 50 60 90 100 150 200 Maximum RMS voltage VRMS 24 31 35 42 63 70 105 140 V Maximum DC blocking voltage VDC 35 45 50 60 90 100 150 200 V Maximum average forward rectified current IF(AV) 40 A Peak repetitive forward current (Rated VR, Square wave, 20KHz) IFRM 40 A Peak forward surge current, 8.3 ms single half sine-wave superimposed on rated load IFSM Peak repetitive reverse surge Current (Note 1) IRRM Maximum instantaneous forward voltage (Note 2) IF=20A, TJ=25℃ IF=20A, TJ=125℃ IF=40A, TJ=25℃ IF=40A, TJ=125℃ Maximum reverse current @ rated VR TJ=25 ℃ TJ=125 ℃ VF 330 A 0.75 0.77 0.84 0.90 0.65 0.67 0.74 0.80 0.80 - - 1.01 0.75 IR A 1 2 1.0 30 20 V - - 0.5 0.1 10 V mA Voltage rate of change (Rated VR) dV/dt 10,000 Typical thermal resistance RθJC 3.5 TJ - 55 to + 150 ℃/W ℃ TSTG - 55 to + 150 ℃ Operating junction temperature range Storage temperature range V/μs Note 1: 2.0μs Pulse Width, f=1.0KHz Note 2: Pulse Test : 300μs Pulse Width, 1% Duty Cycle Rev.07C © 2006 Thinki Semiconductor Co., Ltd. Page 1/2 http://www.thinkisemi.com/ ® MBRF4035CTR thru MBRF40200CTR RATINGS AND CHARACTERISTICS CURVES (TA=25℃ unless otherwise noted) FIG. 2 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG PEAK FORWARD SURGE CURRENT (A) AVERAGE FORWARD CURRENT (A) FIG.1 FORWARD CURRENT DERATING CURVE 50 600 40 8.3ms Single Half Sine Wave JEDEC Method 500 400 30 300 20 200 RESISTIVE OR INDUCTIVE LOAD WITH HEATSINK 10 100 0 0 50 100 0 150 1 10 TJ=125℃ TJ=25℃ Pulse Width=300μs 1% Duty Cycle 1 MBRF40150CTR-MBRF40200CTR 0.1 MBRF4035CTR-MBRF4045CTR MBRF4050CTR-MBRF4060CTR MBRF4090CTR-MBRF40100CTR 0.01 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 FIG.4 TYPICAL REVERSE CHARACTERISTICS PER LEG 100 INSTANTANEOUS REVERSE CURRENT (mA) INSTANTANEOUS FORWARD CURRENT (A) FIG. 3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG 100 10 10 TJ=125℃ 1 TJ=75℃ 0.1 TJ=25℃ 0.01 MBRF4035CTR-MBRF4045CTR MBRF4050CTR-MBRF40200CTR 0.001 0 1.1 1.2 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) FORWARD VOLTAGE (V) FIG. 5 TYPICAL JUNCTION CAPACITANCE PER LEG FIG. 6 TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 100 10000 MBRF4035CTR-MBRF4045CTR f=1.0MHz MBRF4050CTR-MBRF4060CTR Vsig=50mVp-p MBRF4090CTR-MBRF40200CTR TRANSIENT THERMAL IMPEDANCE (℃/W) JUNCTION CAPACITANCE (pF) A 100 NUMBER OF CYCLES AT 60 Hz CASE TEMPERATURE (oC) 10 1000 1 0.1 100 0.1 1 10 REVERSE VOLTAGE (V) Rev.07C © 2006 Thinki Semiconductor Co., Ltd. 100 0.01 0.1 1 10 100 T-PULSE DURATION (sec) Page 2/2 http://www.thinkisemi.com/