ECS ECS-2X6X 32.768 khz tuning fork Datasheet

ECS-3X8X, 2X6X, 1X5X
32.768 KHz TUNING FORK
ECS tuning fork type crystals are used as a
clock source in communication equipment,
measuring instruments, microprocessors and
other time management applications. Their
low power consumption makes these crystals
ideal for portable equipment.
FEATURES
• Cost effective
• Tight tolerance
• Long term stability
• Excellent resistance and
environmental characteristics
• PbFree/RoHS Compliant
PART NUMBERING GUIDE “EXAMPLE”
MANUFACTURER
ECS
ECS
ECS
FREQUENCY
.327
.327
.327
–
–
–
–
–
–
LOAD CAPACITANCE
12.5
12.5
8
PACKAGE TYPE*
8X
13X
14X
–
–
–
* Package type examples (8X=3x8, 13X=2x6, 14X=1x5)
OPERATING CONDITIONS/ELECTRICAL CHARACTERISTICS
PARAMETERS
NOMINAL FREQUENCY
FREQUENCY TOLERANCE
LOAD CAPACITANCE (typ.)
DRIVE LEVEL (max.)
RESISTANCE AT SERIES RESONANCE
Q-FACTOR
TURNOVER TEMPERATURE
Fo
Δf/fo
CL
DL
R1
Q
TM
ß
Co
TEMPERATURE COEFFICIENT
SHUNT CAPACITANCE
CAPACITANCE RATIO
OPERATING TEMP. RANGE
STORAGE TEMP. RANGE
SHOCK RESISTANCE
INSULATION RESISTANCE
AGING (FIRST YEAR)
MOTIONAL CAPACITANCE
TOPR
TSTG
IR
Δf/fo
C1
ECS-3X8X
32.768
±20
12.5
1
35 (max.)
90,000 (typ.)
+25 ±5
2
-0.040ppm/˚C max.
1.60 (typ.)
460 (typ.)
ECS-2X6X
ECS-1X5X
32.768
32.768
±20
±20
12.5
8.0
1
1
35 (max.)
40 (max.)
70,000 (typ.)
80,000 (typ.)
+25 ±5
+25 ±5
2
2
-0.040ppm/˚C max.
-0.040ppm/˚C max.
1.35 (typ.)
1.00 (typ.)
450 (typ.)
400 (typ.)
-10~+60
-40~+85
Drop test 3 times on hard wooden board from height of 75cm / ±5 PPM max.
500MΩ min./DC100V
±3 PPM max. @ +25˚C ±3˚C
0.0035 (typ.)
0.0030 (typ.)
0.0025 (typ.)
UNITS
KHz
PPM
pF
µW
KΩ
˚C
PPM/(ΔC˚)
pF
˚C
˚C
PPM
MΩ
PPM
pF
Note: Contact factory for optional load capacitance.
PACKAGE DIMENSIONS (mm)
1.1
RECOMMENDED OSCILLATION
CIRCUIT
T (˚C)
Rf
ø 0.35
Ø 3.1 Max.
PARABOLIC TEMPERATURE CURVE
-20 -10
0
10
20 30 40 50
60
70
-10
-20
8.2 Max.
Rd
10
-30
Figure 1) ECS-3X8X
-40
-50
C2
-60
ø 0.26
ø 2.1 Max
0.7
C1
6.2 Max.
f/f (PPM)
ELECTRICAL CHARACTERISTICS
IC: TC 4069P
Rf: 10MΩ
Rd: 330KΩ (As required)
C 1 = 22pF, C 2 = 22pF
V DD = 3.0V
10
ø 0.2
ø 1.5 Max
0.45
Figure 2) ECS-2X6X
5.1 Max.
4.3
Figure 3) ECS-1X5X
To determine frequency stability, use parabolic
curvature. For example: What is the stability at 45˚C?
1) Change in T (˚C)
= 45 -25 = 20˚C
2) Change in frequency
= -0.04 PPM x (Δ T) 2
= -0.04 PPM x (20) 2
= -16.0 PPM
In this circuit, low drive level with a maximum of 1µW is recommended. If excessive drive is applied, irregular oscillation
or quartz element fractures may occur.
ECS, INC. INTERNATIONAL 1105 S. RIDGEVIEW, OLATHE, KS 66062 • 913-782-7787 • 800-237-1041 • FAX 913-782-6991 • WWW.ECSXTAL.COM
CRYSTALS
3
CRYSTALS
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
ECS:
ECS-3X8X ECS-1X5/ECS-.327-8-14X ECS-.327-12.5-13X ECS-.327-6-13X
Similar pages